|
PureBytes Links
Trading Reference Links
|
Yes, It works most of the time for me also. That is why I have not
sent it to support yet, because I can not reproduce it reliably,
though it will happen at least once a day. I think it may happen only
with a very slow chart that is busy when I hit enter, but I am not sure.
Best regards,
Dennis
On Nov 2, 2009, at 7:10 PM, Tomasz Janeczko wrote:
> Hello,
>
> Tried that. I can enter number in param window and press ENTER and
> it works just fine.
>
> Best regards,
> Tomasz Janeczko
> amibroker.com
> ----- Original Message -----
> From: "Dennis Brown" <see3d@xxxxxxxxxxx>
> To: <amibroker@xxxxxxxxxxxxxxx>
> Sent: Monday, November 02, 2009 11:49 PM
> Subject: Re: [amibroker] Ami is exiting without an exit command
>
>
> I have also seen this closing without warning or saving my data on
> this last beta only. However, for me it has nothing to do with the
> data feed. Instead, it closes when I enter a number into a slider
> control in the param window and hit the enter key. If I just click on
> some other control parameter it does not crash. It only does this on
> occasion, so I have developed the new habit of not using the enter key
> to complete a parameter entry. ;)
>
> BR,
> Dennis
>
> On Nov 2, 2009, at 1:12 PM, reinsley wrote:
>
>>
>> Barry,
>>
>> I got this issue from 5.26.5 to 5.29.2, as soon as TWS was running
>> AB shuts.
>>
>> I fixed this way : downgrade to 5.20 then upgrade to 5.29.2.
>>
>> I lost few datas, but backfiiling recover the whole stuff. Backup
>> your
>> DB before.
>>
>> It's still running as a charm...
>>
>> Best regards
>>
>> Keith McCombs a écrit :
>>>
>>>
>>> Joris --
>>> Have your lawyer call my lawyer.
>>> -- Keith
>>>
>>>
>>> Joris M.schuller wrote:
>>>
>>>>
>>>>
>>>> That is an _old problem that began in the AB 4.X days_. Suddenly
>>>> for
>>>> no apparent reason, not just at the start of TWS, AB would close.
>>>> (In
>>>> fact, I can’t rule out that it also happened with other data
>>>> vendors
>>>> such as IQFeed, QT) The first couple of times that was of course
>>>> quite
>>>> unsettling. After that you got used to it. It didn’t seem to
>>>> corrupt
>>>> anything, apart from losing some data and on occasion an unsaved
>>>> AFL.
>>>> It clearly _is an intermittent problem_, which are the hardest to
>>>> solve. I spent more time on fault isolation than it was worth, but
>>>> could isolate the problem to AB: Different mice, computers, OS even
>>>> UPS all on occasion showed the same problem. Currently (in AB
>>>> 5.20-5.26) the problem is much reduced. The _high tech solution I
>>>> use_
>>>> (of course proprietary and copyrighted, not to mention unique and
>>>> never done by anyone else before, in short encompassing all the
>>>> customary claims made in this field) is placing the AB in the
>>>> taskbar
>>>> on the left next to the Start button. Then after an inadvertent AB
>>>> close, I then (and again this is proprietary) move the cursor over
>>>> the
>>>> AB icon, place one of my fingers (index selection not critical) on
>>>> the
>>>> mouse and press the Left mouse button and click: Like magic AB
>>>> starts
>>>> up and re-appears. I hope that this explanation is explicit enough:
>>>> Otherwise, don’t hesitate to contact Tomasz.
>>>>
>>>>
>>>>
>>>> *From:* amibroker@xxxxxxxxxxxxxxx
>>>> [mailto:amibroker@xxxxxxxxxxxxxxx]
>>>> *On Behalf Of *Edward Pottasch
>>>> *Sent:* Monday, November 02, 2009 9:02 AM
>>>> *To:* amibroker@xxxxxxxxxxxxxxx
>>>> *Subject:* Re: [amibroker] Ami is exiting without an exit command
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> yes, see the AT group. In my case I have the TWS already started.
>>>> Then I start AB and direct it to the IB database. AB starts
>>>> backfilling data and suddenly disappears. But it does not happen
>>>> always. Some days it does other days all is ok. When I restart AB
>>>> after it has disappeared all is ok. It never happens twice in a row
>>>> during 1 computer session.
>>>>
>>>>
>>>>
>>>> One thing I notice what I did not notice before (prior to 5.29
>>>> beta)
>>>> is that when I start AB I see first the charts appear as white
>>>> blank
>>>> charts (a fraction of a second). Then it is replaced with the
>>>> charts I
>>>> saved previously.
>>>>
>>>>
>>>>
>>>> rgds, Ed
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>>
>>>> *From:* Barry <mailto:razzbarry@xxxxxxxxxxxx>
>>>>
>>>> *To:* amibroker@xxxxxxxxxxxxxxx
>>>> <mailto:amibroker@xxxxxxxxxxxxxxx>
>>>>
>>>> *Sent:* Monday, November 02, 2009 3:50 PM
>>>>
>>>> *Subject:* [amibroker] Ami is exiting without an exit command
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> I start Ami and then TWS. Ami starts fine and once it starts I
>>>> start TWS. When TWS starts Ami closes once in a while and I did
>>>> not issue an exit command. I watch the monitor waiting for TWS to
>>>> start back filling and when TWS starts Ami exits. This has been
>>>> happening since I installed Beta 5.29. I currently have Beta 5.29
>>>> - 2 installed and it has happened on every 5.20 beta. It did not
>>>> happen on 5.20.
>>>>
>>>> Is anyone else having this problem?
>>>>
>>>> Thanks,
>>>>
>>>> Barry
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.423 / Virus Database: 270.14.43/2474 - Release Date:
>>>> 11/02/09 07:51:00
>>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> **** IMPORTANT PLEASE READ ****
>> This group is for the discussion between users only.
>> This is *NOT* technical support channel.
>>
>> TO GET TECHNICAL SUPPORT send an e-mail directly to
>> SUPPORT {at} amibroker.com
>>
>> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
>> http://www.amibroker.com/feedback/
>> (submissions sent via other channels won't be considered)
>>
>> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> http://www.amibroker.com/devlog/
>>
>> Yahoo! Groups Links
>>
>>
>>
>
>
>
> ------------------------------------
>
> **** IMPORTANT PLEASE READ ****
> This group is for the discussion between users only.
> This is *NOT* technical support channel.
>
> TO GET TECHNICAL SUPPORT send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> http://www.amibroker.com/feedback/
> (submissions sent via other channels won't be considered)
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> Yahoo! Groups Links
>
>
>
>
>
> ------------------------------------
>
> **** IMPORTANT PLEASE READ ****
> This group is for the discussion between users only.
> This is *NOT* technical support channel.
>
> TO GET TECHNICAL SUPPORT send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> http://www.amibroker.com/feedback/
> (submissions sent via other channels won't be considered)
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> Yahoo! Groups Links
>
>
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|