|
PureBytes Links
Trading Reference Links
|
Same thing happens on mine too Dennis. I don't press the enter key in the params window anymore either.
--- In amibroker@xxxxxxxxxxxxxxx, Dennis Brown <see3d@xxx> wrote:
>
> Yes, It works most of the time for me also. That is why I have not
> sent it to support yet, because I can not reproduce it reliably,
> though it will happen at least once a day. I think it may happen only
> with a very slow chart that is busy when I hit enter, but I am not sure.
>
> Best regards,
> Dennis
>
> On Nov 2, 2009, at 7:10 PM, Tomasz Janeczko wrote:
>
> > Hello,
> >
> > Tried that. I can enter number in param window and press ENTER and
> > it works just fine.
> >
> > Best regards,
> > Tomasz Janeczko
> > amibroker.com
> > ----- Original Message -----
> > From: "Dennis Brown" <see3d@xxx>
> > To: <amibroker@xxxxxxxxxxxxxxx>
> > Sent: Monday, November 02, 2009 11:49 PM
> > Subject: Re: [amibroker] Ami is exiting without an exit command
> >
> >
> > I have also seen this closing without warning or saving my data on
> > this last beta only. However, for me it has nothing to do with the
> > data feed. Instead, it closes when I enter a number into a slider
> > control in the param window and hit the enter key. If I just click on
> > some other control parameter it does not crash. It only does this on
> > occasion, so I have developed the new habit of not using the enter key
> > to complete a parameter entry. ;)
> >
> > BR,
> > Dennis
> >
> > On Nov 2, 2009, at 1:12 PM, reinsley wrote:
> >
> >>
> >> Barry,
> >>
> >> I got this issue from 5.26.5 to 5.29.2, as soon as TWS was running
> >> AB shuts.
> >>
> >> I fixed this way : downgrade to 5.20 then upgrade to 5.29.2.
> >>
> >> I lost few datas, but backfiiling recover the whole stuff. Backup
> >> your
> >> DB before.
> >>
> >> It's still running as a charm...
> >>
> >> Best regards
> >>
> >> Keith McCombs a écrit :
> >>>
> >>>
> >>> Joris --
> >>> Have your lawyer call my lawyer.
> >>> -- Keith
> >>>
> >>>
> >>> Joris M.schuller wrote:
> >>>
> >>>>
> >>>>
> >>>> That is an _old problem that began in the AB 4.X days_. Suddenly
> >>>> for
> >>>> no apparent reason, not just at the start of TWS, AB would close.
> >>>> (In
> >>>> fact, I can't rule out that it also happened with other data
> >>>> vendors
> >>>> such as IQFeed, QT) The first couple of times that was of course
> >>>> quite
> >>>> unsettling. After that you got used to it. It didn't seem to
> >>>> corrupt
> >>>> anything, apart from losing some data and on occasion an unsaved
> >>>> AFL.
> >>>> It clearly _is an intermittent problem_, which are the hardest to
> >>>> solve. I spent more time on fault isolation than it was worth, but
> >>>> could isolate the problem to AB: Different mice, computers, OS even
> >>>> UPS all on occasion showed the same problem. Currently (in AB
> >>>> 5.20-5.26) the problem is much reduced. The _high tech solution I
> >>>> use_
> >>>> (of course proprietary and copyrighted, not to mention unique and
> >>>> never done by anyone else before, in short encompassing all the
> >>>> customary claims made in this field) is placing the AB in the
> >>>> taskbar
> >>>> on the left next to the Start button. Then after an inadvertent AB
> >>>> close, I then (and again this is proprietary) move the cursor over
> >>>> the
> >>>> AB icon, place one of my fingers (index selection not critical) on
> >>>> the
> >>>> mouse and press the Left mouse button and click: Like magic AB
> >>>> starts
> >>>> up and re-appears. I hope that this explanation is explicit enough:
> >>>> Otherwise, don't hesitate to contact Tomasz.
> >>>>
> >>>>
> >>>>
> >>>> *From:* amibroker@xxxxxxxxxxxxxxx
> >>>> [mailto:amibroker@xxxxxxxxxxxxxxx]
> >>>> *On Behalf Of *Edward Pottasch
> >>>> *Sent:* Monday, November 02, 2009 9:02 AM
> >>>> *To:* amibroker@xxxxxxxxxxxxxxx
> >>>> *Subject:* Re: [amibroker] Ami is exiting without an exit command
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> yes, see the AT group. In my case I have the TWS already started.
> >>>> Then I start AB and direct it to the IB database. AB starts
> >>>> backfilling data and suddenly disappears. But it does not happen
> >>>> always. Some days it does other days all is ok. When I restart AB
> >>>> after it has disappeared all is ok. It never happens twice in a row
> >>>> during 1 computer session.
> >>>>
> >>>>
> >>>>
> >>>> One thing I notice what I did not notice before (prior to 5.29
> >>>> beta)
> >>>> is that when I start AB I see first the charts appear as white
> >>>> blank
> >>>> charts (a fraction of a second). Then it is replaced with the
> >>>> charts I
> >>>> saved previously.
> >>>>
> >>>>
> >>>>
> >>>> rgds, Ed
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>>
> >>>> *From:* Barry <mailto:razzbarry@...>
> >>>>
> >>>> *To:* amibroker@xxxxxxxxxxxxxxx
> >>>> <mailto:amibroker@xxxxxxxxxxxxxxx>
> >>>>
> >>>> *Sent:* Monday, November 02, 2009 3:50 PM
> >>>>
> >>>> *Subject:* [amibroker] Ami is exiting without an exit command
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> I start Ami and then TWS. Ami starts fine and once it starts I
> >>>> start TWS. When TWS starts Ami closes once in a while and I did
> >>>> not issue an exit command. I watch the monitor waiting for TWS to
> >>>> start back filling and when TWS starts Ami exits. This has been
> >>>> happening since I installed Beta 5.29. I currently have Beta 5.29
> >>>> - 2 installed and it has happened on every 5.20 beta. It did not
> >>>> happen on 5.20.
> >>>>
> >>>> Is anyone else having this problem?
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Barry
> >>>>
> >>>> No virus found in this incoming message.
> >>>> Checked by AVG - www.avg.com
> >>>> Version: 8.5.423 / Virus Database: 270.14.43/2474 - Release Date:
> >>>> 11/02/09 07:51:00
> >>>>
> >>>
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> **** IMPORTANT PLEASE READ ****
> >> This group is for the discussion between users only.
> >> This is *NOT* technical support channel.
> >>
> >> TO GET TECHNICAL SUPPORT send an e-mail directly to
> >> SUPPORT {at} amibroker.com
> >>
> >> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> >> http://www.amibroker.com/feedback/
> >> (submissions sent via other channels won't be considered)
> >>
> >> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> >> http://www.amibroker.com/devlog/
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >
> >
> >
> > ------------------------------------
> >
> > **** IMPORTANT PLEASE READ ****
> > This group is for the discussion between users only.
> > This is *NOT* technical support channel.
> >
> > TO GET TECHNICAL SUPPORT send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> > http://www.amibroker.com/feedback/
> > (submissions sent via other channels won't be considered)
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > **** IMPORTANT PLEASE READ ****
> > This group is for the discussion between users only.
> > This is *NOT* technical support channel.
> >
> > TO GET TECHNICAL SUPPORT send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> > http://www.amibroker.com/feedback/
> > (submissions sent via other channels won't be considered)
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > Yahoo! Groups Links
> >
> >
> >
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|