|
PureBytes Links
Trading Reference Links
|
Dennis, Tomasz -
I'll confirm this also - again. Its something that several that I know have experienced for a long time, but I've never been able to relate it to type of parameter, number of parameters (Param, ParamStr, etc.), length of time AB has been up, AB busy or not busy, etc. I just know to NOT use Enter in chart parameters. Unfortunately, I still do it sometimes, and Amibroker occasionally goes down hard and some work in progress in lost.
I sympathize with Tomasz's problem in catching this. In an effort to reproduce this, I've even tried using AutoIt to repeatedly feed actions at a Parameter box without reproducing the problem.
I'm afraid that it may remain an annoyance.
-- BruceR
--- In amibroker@xxxxxxxxxxxxxxx, Dennis Brown <see3d@xxx> wrote:
>
> Yes, It works most of the time for me also. That is why I have not
> sent it to support yet, because I can not reproduce it reliably,
> though it will happen at least once a day. I think it may happen only
> with a very slow chart that is busy when I hit enter, but I am not sure.
>
> Best regards,
> Dennis
>
> On Nov 2, 2009, at 7:10 PM, Tomasz Janeczko wrote:
>
> > Hello,
> >
> > Tried that. I can enter number in param window and press ENTER and
> > it works just fine.
> >
> > Best regards,
> > Tomasz Janeczko
> > amibroker.com
> > ----- Original Message -----
> > From: "Dennis Brown" <see3d@xxx>
> > To: <amibroker@xxxxxxxxxxxxxxx>
> > Sent: Monday, November 02, 2009 11:49 PM
> > Subject: Re: [amibroker] Ami is exiting without an exit command
> >
> >
> > I have also seen this closing without warning or saving my data on
> > this last beta only. However, for me it has nothing to do with the
> > data feed. Instead, it closes when I enter a number into a slider
> > control in the param window and hit the enter key. If I just click on
> > some other control parameter it does not crash. It only does this on
> > occasion, so I have developed the new habit of not using the enter key
> > to complete a parameter entry. ;)
> >
> > BR,
> > Dennis
> >
> > On Nov 2, 2009, at 1:12 PM, reinsley wrote:
> >
> >>
> >> Barry,
> >>
> >> I got this issue from 5.26.5 to 5.29.2, as soon as TWS was running
> >> AB shuts.
> >>
> >> I fixed this way : downgrade to 5.20 then upgrade to 5.29.2.
> >>
> >> I lost few datas, but backfiiling recover the whole stuff. Backup
> >> your
> >> DB before.
> >>
> >> It's still running as a charm...
> >>
> >> Best regards
> >>
> >> Keith McCombs a écrit :
> >>>
> >>>
> >>> Joris --
> >>> Have your lawyer call my lawyer.
> >>> -- Keith
> >>>
> >>>
> >>> Joris M.schuller wrote:
> >>>
> >>>>
> >>>>
> >>>> That is an _old problem that began in the AB 4.X days_. Suddenly
> >>>> for
> >>>> no apparent reason, not just at the start of TWS, AB would close.
> >>>> (In
> >>>> fact, I can't rule out that it also happened with other data
> >>>> vendors
> >>>> such as IQFeed, QT) The first couple of times that was of course
> >>>> quite
> >>>> unsettling. After that you got used to it. It didn't seem to
> >>>> corrupt
> >>>> anything, apart from losing some data and on occasion an unsaved
> >>>> AFL.
> >>>> It clearly _is an intermittent problem_, which are the hardest to
> >>>> solve. I spent more time on fault isolation than it was worth, but
> >>>> could isolate the problem to AB: Different mice, computers, OS even
> >>>> UPS all on occasion showed the same problem. Currently (in AB
> >>>> 5.20-5.26) the problem is much reduced. The _high tech solution I
> >>>> use_
> >>>> (of course proprietary and copyrighted, not to mention unique and
> >>>> never done by anyone else before, in short encompassing all the
> >>>> customary claims made in this field) is placing the AB in the
> >>>> taskbar
> >>>> on the left next to the Start button. Then after an inadvertent AB
> >>>> close, I then (and again this is proprietary) move the cursor over
> >>>> the
> >>>> AB icon, place one of my fingers (index selection not critical) on
> >>>> the
> >>>> mouse and press the Left mouse button and click: Like magic AB
> >>>> starts
> >>>> up and re-appears. I hope that this explanation is explicit enough:
> >>>> Otherwise, don't hesitate to contact Tomasz.
> >>>>
> >>>>
> >>>>
> >>>> *From:* amibroker@xxxxxxxxxxxxxxx
> >>>> [mailto:amibroker@xxxxxxxxxxxxxxx]
> >>>> *On Behalf Of *Edward Pottasch
> >>>> *Sent:* Monday, November 02, 2009 9:02 AM
> >>>> *To:* amibroker@xxxxxxxxxxxxxxx
> >>>> *Subject:* Re: [amibroker] Ami is exiting without an exit command
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> yes, see the AT group. In my case I have the TWS already started.
> >>>> Then I start AB and direct it to the IB database. AB starts
> >>>> backfilling data and suddenly disappears. But it does not happen
> >>>> always. Some days it does other days all is ok. When I restart AB
> >>>> after it has disappeared all is ok. It never happens twice in a row
> >>>> during 1 computer session.
> >>>>
> >>>>
> >>>>
> >>>> One thing I notice what I did not notice before (prior to 5.29
> >>>> beta)
> >>>> is that when I start AB I see first the charts appear as white
> >>>> blank
> >>>> charts (a fraction of a second). Then it is replaced with the
> >>>> charts I
> >>>> saved previously.
> >>>>
> >>>>
> >>>>
> >>>> rgds, Ed
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>>
> >>>> *From:* Barry <mailto:razzbarry@...>
> >>>>
> >>>> *To:* amibroker@xxxxxxxxxxxxxxx
> >>>> <mailto:amibroker@xxxxxxxxxxxxxxx>
> >>>>
> >>>> *Sent:* Monday, November 02, 2009 3:50 PM
> >>>>
> >>>> *Subject:* [amibroker] Ami is exiting without an exit command
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> I start Ami and then TWS. Ami starts fine and once it starts I
> >>>> start TWS. When TWS starts Ami closes once in a while and I did
> >>>> not issue an exit command. I watch the monitor waiting for TWS to
> >>>> start back filling and when TWS starts Ami exits. This has been
> >>>> happening since I installed Beta 5.29. I currently have Beta 5.29
> >>>> - 2 installed and it has happened on every 5.20 beta. It did not
> >>>> happen on 5.20.
> >>>>
> >>>> Is anyone else having this problem?
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Barry
> >>>>
> >>>> No virus found in this incoming message.
> >>>> Checked by AVG - www.avg.com
> >>>> Version: 8.5.423 / Virus Database: 270.14.43/2474 - Release Date:
> >>>> 11/02/09 07:51:00
> >>>>
> >>>
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> **** IMPORTANT PLEASE READ ****
> >> This group is for the discussion between users only.
> >> This is *NOT* technical support channel.
> >>
> >> TO GET TECHNICAL SUPPORT send an e-mail directly to
> >> SUPPORT {at} amibroker.com
> >>
> >> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> >> http://www.amibroker.com/feedback/
> >> (submissions sent via other channels won't be considered)
> >>
> >> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> >> http://www.amibroker.com/devlog/
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >
> >
> >
> > ------------------------------------
> >
> > **** IMPORTANT PLEASE READ ****
> > This group is for the discussion between users only.
> > This is *NOT* technical support channel.
> >
> > TO GET TECHNICAL SUPPORT send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> > http://www.amibroker.com/feedback/
> > (submissions sent via other channels won't be considered)
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > **** IMPORTANT PLEASE READ ****
> > This group is for the discussion between users only.
> > This is *NOT* technical support channel.
> >
> > TO GET TECHNICAL SUPPORT send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> > http://www.amibroker.com/feedback/
> > (submissions sent via other channels won't be considered)
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > Yahoo! Groups Links
> >
> >
> >
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|