|
PureBytes Links
Trading Reference Links
|
I have made all these changes reccommended by Omega's FAQ
and no success.
Any help would be appreciated.
Charlie
>>>>>>>>>>>>>
The only issue encountered to date between the products has been related to
the Security Block drivers. In order for the block to be recognized, the
steps outlined in the Ntreadme.wri file located in the Omega\Prog\Drivers\NT
directory must be completed. The text of this file is included below. In
addition, the following lines must be added to the system.ini file as the
first two lines under the [386Enh] Section as follows:
[386Enh]
device=ssiact.386
SSI_LPT=1
1 is used for LPT1, 2 for LPT2, etc. if the block is attached to a port
other than LPT1.
Text of Ntreadme.wri file:
NOTE: Using Windows 2000, the System32 directory is located in the Windows
directory, not WINNT as outlined below. Please use the Windows\SYSTEM32 or
Windows\SYSTEM32\DRIVERS\ directory where applicable.
Manual Installation of the Security Block under Windows NT
The following is a list of instruction on how to manually install the
drivers for the Security Block under the Windows NT operating system:
Step 1
Copy the following files located in your OMEGA\PROG\DRIVERS\NT directory to
the WINNT\SYSTEM32\DRIVERS\ directory:
SSIDDDP.SYS
SSIPDDP.SYS
Step 2
Copy the following file located in your OMEGA\PROG\DRIVERS\NT directory to
the WINNT\SYSTEM32\ directory:
SSIVDDP.DLL
Step 3
Add the following line to the CONFIG.NT file in Windows NT WINNT\SYSTEM32
directory.
DEVICE=%SystemRoot%\system32\drivers\SSIDDDP.SYS
Step 4
Locate your MS-DOS prompt. At the prompt type the letter of the drive in
which your Omega directory resides followed by the colon and the pressing
Enter or Return key.
Then Type in the following line followed by pressing the Enter or Return
key.
CD\OMEGA\PROG\DRIVERS\NT\SSIREGI install
If you are installing your Security Block on LPT1, STOP HERE and restart
your computer. You have completed the installation of the Security Block. If
you are installing the Security Block on another LPT port continue with the
remaining steps.
|