PureBytes Links
Trading Reference Links
|
Hi Lawrence
Do you have the turbo 920 card ? to connect to the box ?
1/ did you install the driver of the card ?
2/ when you go in the control panel, in the system icon, in the
proprity of the driver 920, did you specifie the speed 460000 ?
Emmanuel
----- Original Message -----
From: Lawrence Price <lprice1023@xxxxxxxxxxxxx>
To: evrard_eng <evrard_eng@xxxxxxxxxxxxx>
Sent: Tuesday, January 18, 2000 10:43 PM
Subject: Re: Server
> I was able to get the server to work on the port at 115. But it will not
> read 460.8. It appears that card may not be compatible with DTN. I
actually
> tried all of the procedures that you outlined. Yes, I do have sp4b.
> Thanks for your help
>
> evrard_eng wrote:
>
> > Hi Lawrence
> >
> > What you have to do is to close the global server, then start it of
line.
> > then you set the speed on box at 460000 (even if it is already at this
> > speed, it's to reinitialize it)
> >
> > then you can put online the global server, do you have sp4 ?
> >
> > Emmanuel
> >
> > ----- Original Message -----
> > From: Lawrence Price <lprice1023@xxxxxxxxxxxxx>
> > To: Omegalist <omega-list@xxxxxxxxxx>
> > Sent: Tuesday, January 18, 2000 12:39 PM
> > Subject: Server
> >
> > > I receive DTN Satellite. I have just installed an Amedia PCI Bus high
> > > speed serial port. I set the DTN receiver at 460800, the speed in the
> > > Global Server and the port at the same speed. I called Amedia to make
> > > sure that their card was set at the high speed and set the speed
> > > appropriately. However when I try to get the server to go on line it
> > > either stays forever at the initialization stage or the connection
> > > fails. When I reduce the speed to 115 on all components and try to
> > > connect, I am still not able to get a connection. When I try the
> > > original serial port in the computer at 115, I still can't connect. I
> > > know that I am receiving data from DTN so I am at a loss. Of course
> > > Omega can't help, unless you get someone that knows something there
you
> > > are lost. Any ideas?
> > > Lawrence Price
> > >
> > >
> > >
>
|