PureBytes Links
Trading Reference Links
|
When I was setting up Nt4 a year ago I called Omega tech support
about a problem I was having and I talked to their resident NT
expert who specifically recommended not running in a separate space
as it causes some TS4 problems of its own. It cleared up whatever
problem I was having back then to not specify that it run protected,
and I have always run with SP3 so I do know that it can be done
without problems. A lot of programming won't run without SP3,
so you will have a hard time with things like IE4 if you only use SP1.
I use NTFS and a dual boot backup copy of NT4 in fat16 to gain
emergency access. Diskeeper 4.0 will defrag NTFS.
Pete wrote:
> At 12:37 PM 1/8/99 +0000, you wrote:
> >I have been getting TS crashes under NT. When I call up the Task Manager
> >and try to End Task on any of the TS modules, the Task Manager crashes. I
> >can then call up another Task Manager and End Task on the Task Manager,
> >which works, but when I try to End Task again on any TS module, this Task
> >Manager crashes. I have to reboot. Any ideas?
>
> What service pack if any are you using? I recommend using SP1 only, unless
> you absolutely must use SP3 for some hardware compatibility issue.
>
> Be sure you are running TS in a protected memory space
> (very important to do with 16bit programs)
> To do this open windows explorer, locate the shortcut you use to start TS,
> ie: c:\winnt\all users\start menu\programs\omega\whatever.exe
> highlight the icon, then right click, select properties from bottom of menu,
> then pick the shortcut tab, under the target path, check the box marked
> Run in separate memory space, then click the apply button at the bottom,
> then ok. Now when a bug in TS occurs and TS trys to overwrite
> the same memory space the OS is using, it will not be allowed to do so.
> 32 bit programs already have this protection built into them when running in
> NT4. I also recommend having Windows 95 installed in a dual boot configuration
> and installing Norton Utilities to de-fragment the hard drive occasionally.
> I have tested using the NTFS file system, but it takes too much of a performance
> hit for me to use, plus you cannot access it under dos or windows 95 should
> something happen.
> Also be sure that the port you are using for the incoming data in correctly
> configured for baud rate and flow control, and that fifo is enabled.
>
> Cheers,
> Pete
> >
> >
> >
|