|
PureBytes Links
Trading Reference Links
|
> there are indeed times where the current
> position as shown in the Bar Reply dialog does not match the time of
> the bar. This seems to occur mainly around data holes.
And this is completely NORMAL and correct behaviour.
You need to understand that playback feature works for ALL SYMBOLS
AT ONCE.
This is not pathetic tool found in other softwares that plays one symbol only.
The playback tool in AB steps the time in fixed intervals.
The Playback position is equivalent to real time ***CLOCK*** - it runs constantly
at fixed intervals no matter what happens with trading/data you have in your DB.
Charts do not move constantly. They move when trades are made
and trades may or may not occur on every given interval.
And if for example one symbol has a hole at 2:45 it will STAY at 2:40.
Exatly like in REAL LIFE !
If given symbol is NOT traded at 2:45 your chart WILL CONTINUE
to show 2:40 bar even if current computer times runs through 2:41, 2:42, ... 2.45, 2.46 and so on.
Then on the OTHER symbol that does not have data hole,
you will see 2:45 bar.
So it is DESIRED and ABSOLUTELY CORRECT behaviour.
> 2. Skip Weekends / Afterhours. I have it narrowed down to Afterhours
> only (i.e. Skip Weekends works fine). In the DB, these times are set
> to 00:00.
Start/End of regular hours MUST NOT be set to ZERO.
They MUST BE SET TO DIFFERENT hours say 9:30 and 16:00.
If you are not interested in using filtering you should use View->Intraday->
Show 24 hours trading, but keep the settings correct (not zero).
Best regards,
Tomasz Janeczko
amibroker.com
----- Original Message -----
From: "jydejyde" <cj@xxxxxxxxxx>
To: <amibroker@xxxxxxxxxxxxxxx>
Sent: Sunday, October 29, 2006 4:06 PM
Subject: [amibroker] Re: AmiBroker 4.88.0 BETA released (Bar Replay Interval issues)
> TJ, thanks for your answer. I still have a few issues with this, though.
>
> 1. 5-min "step interval". Yes, I do use the < > buttoms to shift.
> I have double checked, and there are indeed times where the current
> position as shown in the Bar Reply dialog does not match the time of
> the bar. This seems to occur mainly around data holes.
>
> Example 1:
> Bar Replay time 02:40:00 shows chart time 02:40:00 as small (1 pip,
> same OHLC) bar.
> Click > goes to Bar Replay time 02:45:00, though chart still holding
> on to bar 02:40:00, though adding in size (i.e bigger bar).
> I other words, in Bar Replay, data is added individually at the two
> five mins intervals, whereas on the chart, this is confined to one bar
> (02:40:00) with two moves.
> Same happens on next bar.
>
> Example 2:
> Advancing from Bar Replay 03:05 to 03:10 adds no data/bar to chart
> (i.e. chart time bar remains at 03:05, indicating no data for 03:10).
> A futher click on > to Replay time 03:15, both chart time bars 03:10
> and 03:15 shows up on chart.
>
> The above two scenarios happen quite a lot, more often than not around
> 'data holes'.
>
> 2. Skip Weekends / Afterhours. I have it narrowed down to Afterhours
> only (i.e. Skip Weekends works fine). In the DB, these times are set
> to 00:00. As said, I have no personal use for this functionality, but
> I would be happy send this via support if you deem it helpful in
> rooting out a crash issue. Let me know.
>
> 3. Importing start/end dates from charts: My bad. I did read the Read
> Me, though missed the point about having to select a qoutation first
> and thought it would just pick the charts start/end. This is much
> better, and I thank you for setting me on the right path.
>
>
> Regarding issue 1 (and 2), as this might be getting beyond what this
> forum is intended for, let me know if you prefer for me to contact you
> via support instead.
>
> All the best...
> CJ
>
> --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <groups@xxx> wrote:
>>
>> Hello,
>>
>> 1. 5-minute "step inteval" works just fine.
>> Look at the "current position" (next to the slider)
>> it always incremements by "step interval" in your case
>> 5-minute. You are using < > buttons, aren't you?
>> I am asking because moving the slider
>> with high precision is tricky.
>>
>> If there are data holes, it won't skip given step (again look at
> "current position" time display
>> next to the slider) - instead the chart will not change (because
> there are no new data for
>> given step).
>>
>> >you did stress that we should use the underlying DB interval as the
> interval,
>> Not at all. You can use ANY interval starting from base interval.
>>
>> 2.
>> > 2. My version crashes (stop responding, then closes when clicked) if I
>> > have skip 'afterhours / skip weekends' ticked.
>>
>> Do you have "regular trading hours" defined in
>> File->Database Settings->Intraday settings ?
>>
>> If you still having problems please send me the data you are
>> using. (Of course NOT here, but to the support address)
>>
>> 3. Did you notice small ^ buttons next to Start and End date fields ??
>> They are just for that. Select the quotation from the CHART and
>> press ^ on the "Start" part and selected quote will become your start.
>> Do the same for "End" . This exactly means getting start/end from chart.
>>
>> (this is described in the read me file of course).
>>
>> Best regards,
>> Tomasz Janeczko
>> amibroker.com
>> ----- Original Message -----
>> From: "jydejyde" <cj@xxx>
>> To: <amibroker@xxxxxxxxxxxxxxx>
>> Sent: Saturday, October 28, 2006 7:33 PM
>> Subject: [amibroker] Re: AmiBroker 4.88.0 BETA released
>>
>>
>> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <groups@> wrote:
>> >
>> > TJ, the Bar Reply feature really is a most welcome addition, well
> done.
>> >
>> > A few issues that you maybe be able to clear up for me:
>> >
>> > 1. You name it *Bar* replay for obvious reasons, but what settings do
>> > I need to apply on ex. a 1-min DB, watching a 5-min chart, if I want
>> > it to shift one bar forward for each step forward press?
>> > I have tried using a 5-mins interval, though working mostly, it
>> > sometimes advances two bars, i.e. 10 mins, other times one 5-mins bar
>> > advances partly in two clicks.
>> > I suspect that it gets 'confused' if there are holes in the underlying
>> > 1-min. data, and you did stress that we should use the underlying DB
>> > interval as the interval, but what to use if I want true one bar
>> > advances? Can it be done currently?
>> >
>> > 2. My version crashes (stop responding, then closes when clicked) if I
>> > have skip 'afterhours / skip weekends' ticked. Since I am not
>> > interested in that functionality, it does not bother me personally,
>> > but thought I would mention it out to you.
>> >
>> > 3. Minor thing: Somebody suggested that the start/end was picked up
>> > automatically from the underlying chart. I would support either that,
>> > or that the dates I enter to be saved for next time I open AB.
>> >
>> >
>> > Apart from that, I am now at a point where I have no further things to
>> > ask from AB. It truely have come a long way from when I furst
>> > encountered it some two years back. Well done, and kudoz to you all!
>> >
>> > All the best...
>> > CJ
>> >
>> >
>> >
>> >>
>> >> Hello,
>> >>
>> >> AmiBroker 4.88.0 BETA relased:
>> >>
>> >
> <http://www.amibroker.com/devlog/2006/10/27/amibroker-4880-beta-released/>
>> >>
>> >> Do NOT FORGET to read the READ ME, especially the "CHANGE LOG" part.
>> >>
>> >> It contains THE DOCUMENTATION on how to use
>> >>
>> >> new features and lists all changes.
>> >>
>> >>
>> >
> <http://www.amibroker.com/devlog/wp-content/uploads/2006/10/readme4880.html>
>> >>
>> >> Best regards,
>> >> Tomasz Janeczko
>> >> amibroker.com
>> >>
>> >
>> >
>> >
>> >
>> >
>> > Please note that this group is for discussion between users only.
>> >
>> > To get support from AmiBroker please send an e-mail directly to
>> > SUPPORT {at} amibroker.com
>> >
>> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> > http://www.amibroker.com/devlog/
>> >
>> > For other support material please check also:
>> > http://www.amibroker.com/support.html
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>> >
>>
>
>
>
>
>
> Please note that this group is for discussion between users only.
>
> To get support from AmiBroker please send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> For other support material please check also:
> http://www.amibroker.com/support.html
>
> Yahoo! Groups Links
>
>
>
>
>
>
Content-Description: "AVG certification"
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.27/517 - Release Date: 11/3/2006
|