|
PureBytes Links
Trading Reference Links
|
Ok, thanks... still testing.
What statement intializes and updates the n value?
Where does the n value come from?
--- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@xxx> wrote:
>
> Try 10 minute data ... One of the statements in the VBS is geared
> towards this and might cause only a single dot to show up ... which
> might be all but invisible ...
>
> --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> <rlfoxworth2006@> wrote:
> >
> > Ok thanks.... I'll try working with it and try to get it to work.
> >
> > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> wrote:
> > >
> > > Not likely that will do anything for you ... I took the AFL as
> > > posted, removed the blank lines after the VBS continued lines
> and
> > it
> > > works fine.
> > >
> > > However, given how the AFL is configured and in particular the
> > > Dimension statement for TBL (10, 500) ...
> > >
> > > - If you have more than 500 bars of data I would expect it to
> > > produce an error.
> > > - In addition the AFL will not produce more then 9 total arrays
> > > which means that if more then that many existing lines were
open
> > you
> > > wouldn't see them ...
> > >
> > > As I previously commented ... This is a semi-dumb version to
> > > demonstrate that what you were wanting to do is feasible.
> > >
> > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > <rlfoxworth2006@> wrote:
> > > >
> > > > One more time, please...Still not showing any red dots..
> > > > Any chance posting the afl to the files section?
> > > > Thanks....
> > > >
> > > > RichardF
> > > >
> > > >
> > > >
> > > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> wrote:
> > > > >
> > > > > AFL should work as is ... Works fine for me as demonstrated
> in
> > > > > previous attachment.
> > > > >
> > > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > <rlfoxworth2006@> wrote:
> > > > > >
> > > > > >
> > > > > > 1 min, 5 min, 15 min.
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@>
wrote:
> > > > > > >
> > > > > > > What's the periodicity of the data in your charts ? 5
> Min ?
> > > 10
> > > > > Min ?
> > > > > > >
> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > > > <rlfoxworth2006@> wrote:
> > > > > > > >
> > > > > > > > Ok thanks, I had figured the blank line thing out....
> > > > > > > > Still wondering what to do with this "<<...>>"?
> > > > > > > >
> > > > > > > > Anyhow in the code I'm not getting a value for "n" or
> any
> > > > > values for
> > > > > > > > A1 to A9 when scrolling through the chart, also no
Red
> > > Dots
> > > > > > > anywhere.
> > > > > > > >
> > > > > > > > Sorry to be such a pain... Again thankyou!
> > > > > > > >
> > > > > > > > I used this extra code to check for values when
> > testing....
> > > > > > > >
> > > > > > > > Title = Name ( ) + ", " + Date ( ) + " - " +
> > > > > > > > "\n " + "n = " + n +
> > > > > > > > "\n " + "A1 = " + A1 +
> > > > > > > > "\n " + "A2 = " + A2 +
> > > > > > > > "\n " + "A3 = " + A3 +
> > > > > > > > "\n " + "A4 = " + A4 +
> > > > > > > > "\n " + "A5 = " + A5 +
> > > > > > > > "\n " + "A6 = " + A6 +
> > > > > > > > "\n " + "A7 = " + A7 +
> > > > > > > > "\n " + "A8 = " + A8 +
> > > > > > > > "\n " + "A9 = " + A9 +
> > > > > > > > "\n " + "BI = " + BI +
> > > > > > > > "\n " + "LVBI = " + LVBI +
> > > > > > > > "\n " + "TN = " + TN +
> > > > > > > > "\n " + "H = " + H +
> > > > > > > > "\n " + "L = " + L +
> > > > > > > > "\n " + "C = " + C ;
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@>
> > wrote:
> > > > > > > > >
> > > > > > > > > "An Error Message" is not terribly specific ...
> That's
> > > kind
> > > > > of
> > > > > > > like
> > > > > > > > > me taking my car to the mechanic and saying "I have
> a
> > > > > problem
> > > > > > > with my
> > > > > > > > > car, can you fix it ?" ... I suspect the mechanic
> might
> > > > want
> > > > > to
> > > > > > > know
> > > > > > > > > presactly what problem I think I'm having ...
> > > > > > > > >
> > > > > > > > > For starters ... DON'T ALTER THE CODE ... It works
> as
> > > > > posted ...
> > > > > > > > >
> > > > > > > > > The underscores are continuation characters in VBS
> > > > > indicating
> > > > > > > that
> > > > > > > > > the next line is part of the preceding one. The
> > problem
> > > is
> > > > > that
> > > > > > > > > Yahoo added extra blank lines after code lines ...
> > > so ...
> > > > > make
> > > > > > > sure
> > > > > > > > > the lines that have underscores at the right end of
> > them
> > > do
> > > > > NOT
> > > > > > > have
> > > > > > > > > blank lines following them as this causes a VBS
> syntax
> > > > error.
> > > > > > > > >
> > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > > > > > <rlfoxworth2006@> wrote:
> > > > > > > > > >
> > > > > > > > > > I really appreciate your help, again thanks for
> > taking
> > > > > time out
> > > > > > > and
> > > > > > > > > > helping. The code looks really great! But I've
> > > copied
> > > > > and
> > > > > > > loaded
> > > > > > > > > the
> > > > > > > > > > code and get an error message. I removed the
> > > underscore
> > > > > lines
> > > > > > > after
> > > > > > > > > > the AND and OR to make sure that's not it and
also
> > > this
> > > > at
> > > > > end
> > > > > > > > > <<...>>
> > > > > > > > > > with no luck. I've tried it as is and tested
with
> > the
> > > > > > > removement.
> > > > > > > > > > Any idea what I'm doing wrong?
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, Fred Tonetti
> > > > <ftonetti@>
> > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > Any how . to conclude ( sort of ) . The semi-
> dumb
> > > > > complete
> > > > > > > version
> > > > > > > > > > of this
> > > > > > > > > > > would look like the AFL below . and would
> produce a
> > > > > chart
> > > > > > > like
> > > > > > > > > that
> > > > > > > > > > attached
> > > > > > > > > > > .
> > > > > > > > > > >
> > > > > > > > > > > It's a little smarter then the previously
posted
> > > > > incomplete
> > > > > > > > > version
> > > > > > > > > > in that
> > > > > > > > > > > it reuses arrays when it can but it is still
> dumb
> > in
> > > > > that it
> > > > > > > uses
> > > > > > > > > > AFL arrays
> > > > > > > > > > > rather than the Osaka pluggin to handle the
> tables
> > > and
> > > > > as
> > > > > > > such
> > > > > > > > > requires
> > > > > > > > > > > EVERY array to be defined and plotted .
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > PlotOHLC(O,H,L,C, "Data", colorWhite, styleBar);
> > > > > > > > > > >
> > > > > > > > > > > BI = BarIndex();
> > > > > > > > > > >
> > > > > > > > > > > LVBI = LastValue(BI);
> > > > > > > > > > >
> > > > > > > > > > > TN = TimeNum();
> > > > > > > > > > >
> > > > > > > > > > > printf(NumToStr(LVBI));
> > > > > > > > > > >
> > > > > > > > > > > EnableScript("VBScript");
> > > > > > > > > > >
> > > > > > > > > > > A1 = A2 = A3 = A4 = A5 = A6 = A7 = A8 = A9 = Cum
> (0);
> > > > > > > > > > >
> > > > > > > > > > > <%
> > > > > > > > > > >
> > > > > > > > > > > BI = AFL("BI")
> > > > > > > > > > >
> > > > > > > > > > > LVBI = AFL("LVBI")
> > > > > > > > > > >
> > > > > > > > > > > TN = AFL("TN")
> > > > > > > > > > >
> > > > > > > > > > > H = AFL("H")
> > > > > > > > > > >
> > > > > > > > > > > L = AFL("L")
> > > > > > > > > > >
> > > > > > > > > > > C = AFL("C")
> > > > > > > > > > >
> > > > > > > > > > > A1 = AFL("A1")
> > > > > > > > > > >
> > > > > > > > > > > A2 = AFL("A2")
> > > > > > > > > > >
> > > > > > > > > > > A3 = AFL("A3")
> > > > > > > > > > >
> > > > > > > > > > > A4 = AFL("A4")
> > > > > > > > > > >
> > > > > > > > > > > A5 = AFL("A5")
> > > > > > > > > > >
> > > > > > > > > > > A6 = AFL("A6")
> > > > > > > > > > >
> > > > > > > > > > > A7 = AFL("A7")
> > > > > > > > > > >
> > > > > > > > > > > A8 = AFL("A8")
> > > > > > > > > > >
> > > > > > > > > > > A9 = AFL("A9")
> > > > > > > > > > >
> > > > > > > > > > > Dim TBL(10, 500)
> > > > > > > > > > >
> > > > > > > > > > > for i = 1 to LVBI
> > > > > > > > > > >
> > > > > > > > > > > for j = 1 to 9
> > > > > > > > > > >
> > > > > > > > > > > if TBL(j, 0) = 1 then
> > > > > > > > > > >
> > > > > > > > > > > if TN(i) <> 95500 then
> > > > > > > > > > >
> > > > > > > > > > > if (C(i-1) <= TBL(j, i-1) AND _
> > > > > > > > > > >
> > > > > > > > > > > H(i) >= TBL(j, i-1)) OR _
> > > > > > > > > > >
> > > > > > > > > > > (C(i-1) >= TBL(j, i-1) AND _
> > > > > > > > > > >
> > > > > > > > > > > L(i) <= TBL(j, i-1)) then
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, 0) = 0
> > > > > > > > > > >
> > > > > > > > > > > else
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > >
> > > > > > > > > > > end if
> > > > > > > > > > >
> > > > > > > > > > > else
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > >
> > > > > > > > > > > end if
> > > > > > > > > > >
> > > > > > > > > > > end if
> > > > > > > > > > >
> > > > > > > > > > > Next
> > > > > > > > > > >
> > > > > > > > > > > if TN(i) = 95000 then
> > > > > > > > > > >
> > > > > > > > > > > for j = 1 To 10
> > > > > > > > > > >
> > > > > > > > > > > if TBL(j, 0) = 0 then
> > > > > > > > > > >
> > > > > > > > > > > Exit for
> > > > > > > > > > >
> > > > > > > > > > > End if
> > > > > > > > > > >
> > > > > > > > > > > Next
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, i) = H(i)
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, 0) = 1
> > > > > > > > > > >
> > > > > > > > > > > for j = 1 To 10
> > > > > > > > > > >
> > > > > > > > > > > if TBL(j, 0) = 0 then
> > > > > > > > > > >
> > > > > > > > > > > Exit for
> > > > > > > > > > >
> > > > > > > > > > > End if
> > > > > > > > > > >
> > > > > > > > > > > Next
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, i) = L(i)
> > > > > > > > > > >
> > > > > > > > > > > TBL(j, 0) = 1
> > > > > > > > > > >
> > > > > > > > > > > end if
> > > > > > > > > > >
> > > > > > > > > > > Next
> > > > > > > > > > >
> > > > > > > > > > > for i = 0 to 499
> > > > > > > > > > >
> > > > > > > > > > > A1(i) = TBL(1, i)
> > > > > > > > > > >
> > > > > > > > > > > A2(i) = TBL(2, i)
> > > > > > > > > > >
> > > > > > > > > > > A3(i) = TBL(3, i)
> > > > > > > > > > >
> > > > > > > > > > > A4(i) = TBL(4, i)
> > > > > > > > > > >
> > > > > > > > > > > A5(i) = TBL(5, i)
> > > > > > > > > > >
> > > > > > > > > > > A6(i) = TBL(6, i)
> > > > > > > > > > >
> > > > > > > > > > > A7(i) = TBL(7, i)
> > > > > > > > > > >
> > > > > > > > > > > A8(i) = TBL(8, i)
> > > > > > > > > > >
> > > > > > > > > > > A9(i) = TBL(9, i)
> > > > > > > > > > >
> > > > > > > > > > > Next
> > > > > > > > > > >
> > > > > > > > > > > AFL("n") = n
> > > > > > > > > > >
> > > > > > > > > > > AFL("A1") = A1
> > > > > > > > > > >
> > > > > > > > > > > AFL("A2") = A2
> > > > > > > > > > >
> > > > > > > > > > > AFL("A3") = A3
> > > > > > > > > > >
> > > > > > > > > > > AFL("A4") = A4
> > > > > > > > > > >
> > > > > > > > > > > AFL("A5") = A5
> > > > > > > > > > >
> > > > > > > > > > > AFL("A6") = A6
> > > > > > > > > > >
> > > > > > > > > > > AFL("A7") = A7
> > > > > > > > > > >
> > > > > > > > > > > AFL("A8") = A8
> > > > > > > > > > >
> > > > > > > > > > > AFL("A9") = A9
> > > > > > > > > > >
> > > > > > > > > > > %>
> > > > > > > > > > >
> > > > > > > > > > > printf(NumToStr(n));
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A1 > 1, A1, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A2 > 1, A2, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A3 > 1, A3, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A4 > 1, A4, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A5 > 1, A5, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A6 > 1, A6, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A7 > 1, A7, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A8 > 1, A8, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > Plot(IIf(A9 > 1, A9, -1e10), "", colorRed,
> > > styleDots);
> > > > > > > > > > >
> > > > > > > > > > > <<...>>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > _____
> > > > > > > > > > >
> > > > > > > > > > > I am using the free version of SPAMfighter for
> > > private
> > > > > users.
> > > > > > > > > > > It has removed 8649 spam emails to date.
> > > > > > > > > > > Paying users do not have this message in their
> > > emails.
> > > > > > > > > > > Try SPAMfighter
> <http://www.spamfighter.com/go.asp?
> > > > > t=249>
> > > > > > > for
> > > > > > > > > free now!
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Content-Description: "AVG certification"
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.27/517 - Release Date: 11/3/2006
|