[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[amibroker] Re: Need help Figuring Out.



PureBytes Links

Trading Reference Links

Try 10 minute data ... One of the statements in the VBS is geared 
towards this and might cause only a single dot to show up ... which 
might be all but invisible ...

--- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006" 
<rlfoxworth2006@xxx> wrote:
>
> Ok thanks.... I'll try working with it and try to get it to work.
> 
> --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> wrote:
> >
> > Not likely that will do anything for you ... I took the AFL as 
> > posted, removed the blank lines after the VBS continued lines 
and 
> it 
> > works fine.
> > 
> > However, given how the AFL is configured and in particular the 
> > Dimension statement for TBL (10, 500) ... 
> > 
> > - If you have more than 500 bars of data I would expect it to 
> > produce an error.  
> > - In addition the AFL will not produce more then 9 total arrays 
> > which means that if more then that many existing lines were open 
> you 
> > wouldn't see them ...
> > 
> > As I previously commented ... This is a semi-dumb version to 
> > demonstrate that what you were wanting to do is feasible.
> > 
> > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006" 
> > <rlfoxworth2006@> wrote:
> > >
> > > One more time, please...Still not showing any red dots..  
> > > Any chance posting the afl to the files section?
> > > Thanks....
> > > 
> > > RichardF
> > > 
> > > 
> > > 
> > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> wrote:
> > > >
> > > > AFL should work as is ... Works fine for me as demonstrated 
in 
> > > > previous attachment.
> > > > 
> > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006" 
> > > > <rlfoxworth2006@> wrote:
> > > > >
> > > > > 
> > > > > 1 min, 5 min, 15 min. 
> > > > > 
> > > > > 
> > > > > 
> > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> wrote:
> > > > > >
> > > > > > What's the periodicity of the data in your charts ? 5 
Min ? 
> > 10 
> > > > Min ?
> > > > > > 
> > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006" 
> > > > > > <rlfoxworth2006@> wrote:
> > > > > > >
> > > > > > > Ok thanks, I had figured the blank line thing out....
> > > > > > > Still wondering what to do with  this "<<...>>"? 
> > > > > > > 
> > > > > > > Anyhow in the code I'm not getting a value for "n" or 
any 
> > > > values for
> > > > > > > A1 to A9 when scrolling through the chart, also no Red 
> > Dots 
> > > > > > anywhere.
> > > > > > > 
> > > > > > > Sorry to be such a pain... Again thankyou!
> > > > > > > 
> > > > > > > I used this extra code to check for values when 
> testing....
> > > > > > > 
> > > > > > > Title = Name ( ) + ", " + Date ( ) + " - " +
> > > > > > > "\n " + "n = " + n +
> > > > > > > "\n " + "A1 = " + A1 +
> > > > > > > "\n " + "A2 = " + A2 +
> > > > > > > "\n " + "A3 = " + A3 +
> > > > > > > "\n " + "A4 = " + A4 +
> > > > > > > "\n " + "A5 = " + A5 +
> > > > > > > "\n " + "A6 = " + A6 +
> > > > > > > "\n " + "A7 = " + A7 +
> > > > > > > "\n " + "A8 = " + A8 +
> > > > > > > "\n " + "A9 = " + A9 +
> > > > > > > "\n " + "BI = " + BI +
> > > > > > > "\n " + "LVBI = " + LVBI +
> > > > > > > "\n " + "TN = " + TN +
> > > > > > > "\n " + "H = " + H +
> > > > > > > "\n " + "L = " + L +
> > > > > > > "\n " + "C = " + C ;
> > > > > > > 
> > > > > > > 
> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Fred" <ftonetti@> 
> wrote:
> > > > > > > >
> > > > > > > > "An Error Message" is not terribly specific ... 
That's 
> > kind 
> > > > of 
> > > > > > like 
> > > > > > > > me taking my car to the mechanic and saying "I have 
a 
> > > > problem 
> > > > > > with my 
> > > > > > > > car, can you fix it ?" ... I suspect the mechanic 
might 
> > > want 
> > > > to 
> > > > > > know 
> > > > > > > > presactly what problem I think I'm having ...
> > > > > > > > 
> > > > > > > > For starters ... DON'T ALTER THE CODE ... It works 
as 
> > > > posted ...
> > > > > > > > 
> > > > > > > > The underscores are continuation characters in VBS 
> > > > indicating 
> > > > > > that 
> > > > > > > > the next line is part of the preceding one.  The 
> problem 
> > is 
> > > > that 
> > > > > > > > Yahoo added extra blank lines after code lines ... 
> > so ... 
> > > > make 
> > > > > > sure 
> > > > > > > > the lines that have underscores at the right end of 
> them 
> > do 
> > > > NOT 
> > > > > > have 
> > > > > > > > blank lines following them as this causes a VBS 
syntax 
> > > error.
> > > > > > > > 
> > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006" 
> > > > > > > > <rlfoxworth2006@> wrote:
> > > > > > > > >
> > > > > > > > > I really appreciate your help, again thanks for 
> taking 
> > > > time out 
> > > > > > and
> > > > > > > > > helping.  The code looks really great!  But I've 
> > copied 
> > > > and 
> > > > > > loaded 
> > > > > > > > the
> > > > > > > > > code and get an error message.  I removed the 
> > underscore 
> > > > lines 
> > > > > > after
> > > > > > > > > the AND and OR to make sure that's not it and also 
> > this 
> > > at 
> > > > end 
> > > > > > > > <<...>>
> > > > > > > > > with no luck.  I've tried it as is and tested with 
> the 
> > > > > > removement. 
> > > > > > > > > Any idea what I'm doing wrong?
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, Fred Tonetti 
> > > <ftonetti@> 
> > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Any how . to conclude ( sort of ) . The semi-
dumb 
> > > > complete 
> > > > > > version
> > > > > > > > > of this
> > > > > > > > > > would look like the AFL below . and would 
produce a 
> > > > chart 
> > > > > > like 
> > > > > > > > that
> > > > > > > > > attached
> > > > > > > > > > .
> > > > > > > > > > 
> > > > > > > > > > It's a little smarter then the previously posted 
> > > > incomplete 
> > > > > > > > version
> > > > > > > > > in that
> > > > > > > > > > it reuses arrays when it can but it is still 
dumb 
> in 
> > > > that it 
> > > > > > uses
> > > > > > > > > AFL arrays
> > > > > > > > > > rather than the Osaka pluggin to handle the 
tables 
> > and 
> > > > as 
> > > > > > such 
> > > > > > > > requires
> > > > > > > > > > EVERY array to be defined and plotted .
> > > > > > > > > > 
> > > > > > > > > >  
> > > > > > > > > > 
> > > > > > > > > > PlotOHLC(O,H,L,C, "Data", colorWhite, styleBar);
> > > > > > > > > > 
> > > > > > > > > > BI   = BarIndex();
> > > > > > > > > > 
> > > > > > > > > > LVBI = LastValue(BI);
> > > > > > > > > > 
> > > > > > > > > > TN   = TimeNum();
> > > > > > > > > > 
> > > > > > > > > > printf(NumToStr(LVBI));
> > > > > > > > > > 
> > > > > > > > > > EnableScript("VBScript");
> > > > > > > > > > 
> > > > > > > > > > A1 = A2 = A3 = A4 = A5 = A6 = A7 = A8 = A9 = Cum
(0);
> > > > > > > > > > 
> > > > > > > > > > <%
> > > > > > > > > > 
> > > > > > > > > > BI   = AFL("BI")
> > > > > > > > > > 
> > > > > > > > > > LVBI = AFL("LVBI")
> > > > > > > > > > 
> > > > > > > > > > TN   = AFL("TN")
> > > > > > > > > > 
> > > > > > > > > > H    = AFL("H")
> > > > > > > > > > 
> > > > > > > > > > L    = AFL("L")
> > > > > > > > > > 
> > > > > > > > > > C    = AFL("C")
> > > > > > > > > > 
> > > > > > > > > > A1   = AFL("A1")
> > > > > > > > > > 
> > > > > > > > > > A2   = AFL("A2")
> > > > > > > > > > 
> > > > > > > > > > A3   = AFL("A3")
> > > > > > > > > > 
> > > > > > > > > > A4   = AFL("A4")
> > > > > > > > > > 
> > > > > > > > > > A5   = AFL("A5")
> > > > > > > > > > 
> > > > > > > > > > A6   = AFL("A6")
> > > > > > > > > > 
> > > > > > > > > > A7   = AFL("A7")
> > > > > > > > > > 
> > > > > > > > > > A8   = AFL("A8")
> > > > > > > > > > 
> > > > > > > > > > A9   = AFL("A9")
> > > > > > > > > > 
> > > > > > > > > > Dim TBL(10, 500)
> > > > > > > > > > 
> > > > > > > > > > for i = 1 to LVBI
> > > > > > > > > > 
> > > > > > > > > >     for j = 1 to 9
> > > > > > > > > > 
> > > > > > > > > >         if TBL(j, 0) = 1 then
> > > > > > > > > > 
> > > > > > > > > >             if TN(i) <> 95500 then
> > > > > > > > > > 
> > > > > > > > > >                 if (C(i-1) <= TBL(j, i-1) AND _
> > > > > > > > > > 
> > > > > > > > > >                     H(i) >= TBL(j, i-1)) OR _
> > > > > > > > > > 
> > > > > > > > > >                    (C(i-1) >= TBL(j, i-1) AND _
> > > > > > > > > > 
> > > > > > > > > >                     L(i) <= TBL(j, i-1)) then
> > > > > > > > > > 
> > > > > > > > > >                     TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > 
> > > > > > > > > >                     TBL(j, 0) = 0
> > > > > > > > > > 
> > > > > > > > > >                 else
> > > > > > > > > > 
> > > > > > > > > >                     TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > 
> > > > > > > > > >                 end if
> > > > > > > > > > 
> > > > > > > > > >             else
> > > > > > > > > > 
> > > > > > > > > >                 TBL(j, i) = TBL(j, i-1)
> > > > > > > > > > 
> > > > > > > > > >             end if
> > > > > > > > > > 
> > > > > > > > > >         end if
> > > > > > > > > > 
> > > > > > > > > >     Next
> > > > > > > > > > 
> > > > > > > > > >     if TN(i) = 95000 then
> > > > > > > > > > 
> > > > > > > > > >         for j = 1 To 10
> > > > > > > > > > 
> > > > > > > > > >             if TBL(j, 0) = 0 then
> > > > > > > > > > 
> > > > > > > > > >                 Exit for
> > > > > > > > > > 
> > > > > > > > > >             End if
> > > > > > > > > > 
> > > > > > > > > >         Next     
> > > > > > > > > > 
> > > > > > > > > >         TBL(j, i) = H(i)
> > > > > > > > > > 
> > > > > > > > > >         TBL(j, 0) = 1
> > > > > > > > > > 
> > > > > > > > > >         for j = 1 To 10
> > > > > > > > > > 
> > > > > > > > > >             if TBL(j, 0) = 0 then
> > > > > > > > > > 
> > > > > > > > > >                 Exit for
> > > > > > > > > > 
> > > > > > > > > >             End if
> > > > > > > > > > 
> > > > > > > > > >         Next     
> > > > > > > > > > 
> > > > > > > > > >         TBL(j, i) = L(i)
> > > > > > > > > > 
> > > > > > > > > >         TBL(j, 0) = 1
> > > > > > > > > > 
> > > > > > > > > >     end if
> > > > > > > > > > 
> > > > > > > > > > Next
> > > > > > > > > > 
> > > > > > > > > > for i = 0 to 499
> > > > > > > > > > 
> > > > > > > > > >     A1(i) = TBL(1, i)
> > > > > > > > > > 
> > > > > > > > > >     A2(i) = TBL(2, i)
> > > > > > > > > > 
> > > > > > > > > >     A3(i) = TBL(3, i)
> > > > > > > > > > 
> > > > > > > > > >     A4(i) = TBL(4, i)
> > > > > > > > > > 
> > > > > > > > > >     A5(i) = TBL(5, i)
> > > > > > > > > > 
> > > > > > > > > >     A6(i) = TBL(6, i)
> > > > > > > > > > 
> > > > > > > > > >     A7(i) = TBL(7, i)
> > > > > > > > > > 
> > > > > > > > > >     A8(i) = TBL(8, i)
> > > > > > > > > > 
> > > > > > > > > >     A9(i) = TBL(9, i)
> > > > > > > > > > 
> > > > > > > > > > Next
> > > > > > > > > > 
> > > > > > > > > > AFL("n") = n 
> > > > > > > > > > 
> > > > > > > > > > AFL("A1") = A1
> > > > > > > > > > 
> > > > > > > > > > AFL("A2") = A2
> > > > > > > > > > 
> > > > > > > > > > AFL("A3") = A3
> > > > > > > > > > 
> > > > > > > > > > AFL("A4") = A4
> > > > > > > > > > 
> > > > > > > > > > AFL("A5") = A5
> > > > > > > > > > 
> > > > > > > > > > AFL("A6") = A6
> > > > > > > > > > 
> > > > > > > > > > AFL("A7") = A7
> > > > > > > > > > 
> > > > > > > > > > AFL("A8") = A8
> > > > > > > > > > 
> > > > > > > > > > AFL("A9") = A9
> > > > > > > > > > 
> > > > > > > > > > %>
> > > > > > > > > > 
> > > > > > > > > > printf(NumToStr(n));
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A1 > 1, A1, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A2 > 1, A2, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A3 > 1, A3, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A4 > 1, A4, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A5 > 1, A5, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A6 > 1, A6, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A7 > 1, A7, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A8 > 1, A8, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > Plot(IIf(A9 > 1, A9, -1e10), "", colorRed, 
> > styleDots);
> > > > > > > > > > 
> > > > > > > > > > <<...>> 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > >   _____  
> > > > > > > > > > 
> > > > > > > > > > I am using the free version of SPAMfighter for 
> > private 
> > > > users.
> > > > > > > > > > It has removed 8649 spam emails to date.
> > > > > > > > > > Paying users do not have this message in their 
> > emails.
> > > > > > > > > > Try SPAMfighter 
<http://www.spamfighter.com/go.asp?
> > > > t=249>  
> > > > > > for 
> > > > > > > > free now!
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>




Content-Description: "AVG certification"
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.27/517 - Release Date: 11/3/2006