|
PureBytes Links
Trading Reference Links
|
One way I found to get around this was to use stylenorescale for all
but the main plot
On Apr 2, 2005 3:32 PM, mrdavis9 <mrdavis9@xxxxxxxxxx> wrote:
> TJ and others shamed me into upgrading to the latest version of Amibroker.
> Now I really need help. I did watch the drag and drop video.
>
> I am having problems in that the plots in my custom indicators will not
> adjust themselves to fill the available space from top to bottom of the
> screen. One has 28 Plot lines of all oscillator values that obviously top
> out at 99.999 and bottom out at almost zero.
>
> When all 28 lines are being displayed, the highest value that shows at the
> top of the window pane is almost 200, even though the highest plotline
> actual value is just shy of 99. Also the lowest value that shows at the
> bottom of the pane is almost -200, so there is a LOT of wasted space above
> and below my plot lines. With all 28 plot lines showing, the number of
> horizontal grid lines showing is 6, with the SECOND from top, and SECOND
> from bottom grid lines acting as barriers.
>
> I then commented out all but 7 plot lines, and this caused the highest
> value that shows at the top of the window pane to be about 115, and the
> lowest value at the bottom of the window became about -115. With these 7
> plot lines showing, the number of horizontal grid lines showing is 9, with
> the FIRST from top, and FIRST from bottom grid lines acting as barriers.
>
> Now it really gets strange, If I have the plot of Rsi(2) at the bottom of a
> Plot stack of only 5, there are 6 horizontal grid lines showing, and the
> plot lines are extending to touch both the top and bottom grid lines each of
> which are located very close to the top and bottom of the pane, resulting in
> very little wasted space.
>
> I then relocated Rsi(2) to the top of the plot stack of 5, and the
> horizontal grid lines are still 6, however, the first from top, and first
> from bottom grid lines are NOT very close to the top of the pane. Therefore,
> I still am looking at substantial wasted pane space.
>
> How can I remedy this situation so that my plotlines will fill all of a
> custom indicator window from top to bottom like they did before I upgraded.
> Ron D
>
> Please note that this group is for discussion between users only.
>
> To get support from AmiBroker please send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> For other support material please check also:
> http://www.amibroker.com/support.html
>
>
>
>
> ________________________________
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/amibroker/
>
> To unsubscribe from this group, send an email to:
> amibroker-unsubscribe@xxxxxxxxxxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
--
Cheers
Graham
http://e-wire.net.au/~eb_kavan/
------------------------ Yahoo! Groups Sponsor --------------------~-->
In low income neighborhoods, 84% do not own computers.
At Network for Good, help bridge the Digital Divide!
http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/GHeqlB/TM
--------------------------------------------------------------------~->
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|