[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [amibroker] Array processing in Loops (Dimitris) [was] Re: The use of the Powsmooth



PureBytes Links

Trading Reference Links

Hello,

Now (using 4.37.0) it is possible to write it entirely in AFL without listing

/* note: if given watch list contains lots of symbols 
** performance may be poor 
*/
function CreateAverageForWatchList( listnum )
{
 // retrive comma-separated list of symbols in watch list
 list = GetCategorySymbols( categoryWatchlist, listnum );

 Average = 0; // just in case there are no watch list members

 for( i = 0; ( sym = StrExtract( list, i ) ) != ""; i++ )
 {
   f = Foreign( sym, "C" );
   if( i == 0 ) Average = f;
   else Average = Average + f;
 }

 return Average / i; // divide by number of components
}

Plot( CreateAverageForWatchList( 1 ), "Avg of WL 1", colorGreen ); 



Best regards,
Tomasz Janeczko
amibroker.com
----- Original Message ----- 
From: "MarkF2" <feierstein@xxxxxxxxx>
To: <amibroker@xxxxxxxxxxxxxxx>
Sent: Friday, May 16, 2003 4:05 PM
Subject: [amibroker] Array processing in Loops (Dimitris) [was] Re: The use of the Powsmooth


> Dimitris,
> Thanks for laying this out so clearly for me.  The light bulb finally
> went on (in my mind, it's an American expression).
> Mark
> --- In amibroker@xxxxxxxxxxxxxxx, "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> wrote:
> > Mark,
> > Tomasz replies to the subject were
> > http://groups.yahoo.com/group/amibroker/message/40306
> > http://groups.yahoo.com/group/amibroker/message/40312
> > http://groups.yahoo.com/group/amibroker/message/40313
> > http://groups.yahoo.com/group/amibroker/message/40321
> > http://groups.yahoo.com/group/amibroker/message/40326
> > Especially in #40312, the function GetTicker( index ) should need 100 
> > if/else
> > lines to change Names to numbrers [for an 100 stocks database]
> > It seems hard to avoid this step.
> > In my "naive" Solution2 at 
> > http://groups.yahoo.com/group/amibroker/message/40414 I could not 
> > avoid writing the 100 names.
> > The advantage of #40312 is that you do not have to repeat the 
> > indicator formula 100 times, you need to define ONCE an indicator 
> > function.
> > It is interesting of course, but does not overcomes the main 
> > disadvantage of the 100 names [note that you should change the code 
> > lines whenever the N100 changes some members...]
> > I hoped, as I wrote at the end of #40414, to "a flexible IB code to 
> > read internally the database names and give the final MACDBULL" but 
> > it is N/A for now.
> > In other words, we do not have in IB the "Apply To" possibility, 
> > which plays a very important role in AA: When we select Apply to WL4, 
> > the program will iterate through all WL4 stocks without any care for 
> > their names or population.
> > I do not know how to "read" the WL4 names from IB window.
> > If something will change, I will revert.
> > Dimitris Tsokakis
> >  
> >  
> > --- In amibroker@xxxxxxxxxxxxxxx, "MarkF2" <feierstein@xxxx> wrote:
> > > I'm also confused by this but then again, I'm not much of a 
> > programmer
> > > and I'm just beginning to learn about loops.  So if anyone ever puts
> > > together the *complete code* for doing any composite function with
> > > loops, *without* a plugin or having to individually list all the
> > > stocks that are used to calculate it, I for one would love to see 
> > it.
> > > 
> > > Mark
> > > 
> > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <amibroker@xxxx>
> > > wrote:
> > > > Dimitris,
> > > > 
> > > > I have provided 2 versions: one that did not require any plugin
> > > > and one that required plugin.
> > > > 
> > > > I hope that this addresses your concern.
> > > > 
> > > > Best regards,
> > > > Tomasz Janeczko
> > > > amibroker.com
> > > > ----- Original Message ----- 
> > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > Sent: Thursday, May 15, 2003 1:21 PM
> > > > Subject: [amibroker] Array processing in Loops (Tomasz) [was] Re:
> > > The use of the Powsmooth
> > > > 
> > > > 
> > > > > Thank you Tomasz, but, this solution was through some 3rd party 
> > > > > plugin, as far as I understand.
> > > > > I do not know what other users may do, but I would never trade 
> > a 
> > > > > single euro on some unauthorised plugin, useful perhaps for the 
> > > > > creator.
> > > > > If there is any AFL solution to the question I described at
> > > > > http://groups.yahoo.com/group/amibroker/message/40414
> > > > > please advise.
> > > > > Else, leave the solution2 as is, it works fine and, above all, 
> > I do 
> > > > > not expect ANY surprises when the application time comes !!
> > > > > I have many reasons to be an amibroker user, I have no reason 
> > to 
> > > > > become a 3rd party experimentalist.
> > > > > Dimitris Tsokakis
> > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" 
> > <amibroker@xxxx> 
> > > > > wrote:
> > > > > > Dimitris,
> > > > > > 
> > > > > > The code provided previously by me works in Indicator Builder 
> > too.
> > > > > > Just replace AddColumn by Plot function.
> > > > > > 
> > > > > > Best regards,
> > > > > > Tomasz Janeczko
> > > > > > amibroker.com
> > > > > > ----- Original Message ----- 
> > > > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > > Sent: Wednesday, May 14, 2003 10:47 PM
> > > > > > Subject: [amibroker] Array processing in Loops (Tomasz) [was] 
> > Re: 
> > > > > The use of the Powsmooth
> > > > > > 
> > > > > > 
> > > > > > > Tomasz,
> > > > > > > thank you for your reply.
> > > > > > > I want to plot MACDBULL, for example, in IB.
> > > > > > > Your dialogue with Peter was for AA through exploration.
> > > > > > > If I miss something, please advise.
> > > > > > > Dimitris Tsokakis
> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" 
> > > > > <amibroker@xxxx> 
> > > > > > > wrote:
> > > > > > > > Dimitris,
> > > > > > > > 
> > > > > > > > I provided already the code that calculates the composite
> > > > > > > > without AddToComposite, but it requires version 4.32.0 or 
> > higher
> > > > > > > > (4.36.0 for example) because it uses 'for' loop.
> > > > > > > > 
> > > > > > > > Once you upgrade to the recent version you will enjoy
> > > > > > > > the power of native looping in AFL.
> > > > > > > > 
> > > > > > > > Best regards,
> > > > > > > > Tomasz Janeczko
> > > > > > > > amibroker.com
> > > > > > > > ----- Original Message ----- 
> > > > > > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > > > > Sent: Wednesday, May 14, 2003 9:43 PM
> > > > > > > > Subject: [amibroker] Array processing in Loops (Tomasz) 
> > [was] 
> > > > > Re: 
> > > > > > > The use of the Powsmooth
> > > > > > > > 
> > > > > > > > 
> > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" 
> > > > > > > <amibroker@xxxx> 
> > > > > > > > > wrote:
> > > > > > > > > > Hello,
> > > > > > > > > > 
> > > > > > > > > > No, I meant use AddToComposite that is exactly 
> > provided for 
> > > > > > > > > creation of composites.
> > > > > > > > > 
> > > > > > > > > Tomasz,
> > > > > > > > > AddToComposite scan can create composites, if you are 
> > free to 
> > > > > > > scan 
> > > > > > > > > and you have nothing else to do.
> > > > > > > > > It is not always that easy.
> > > > > > > > > Since there is a small distance from theory to 
> > application, 
> > > > > > > please 
> > > > > > > > > try to understand the problem of the last hour 
> > decision. i 
> > > > > tried 
> > > > > > > to 
> > > > > > > > > give a rough example at the "No title" message. The 
> > real 
> > > > > thing is 
> > > > > > > > > much more complicated, when one has to check more than 
> > two 
> > > > > > > > > conditions .
> > > > > > > > > TIA
> > > > > > > > > Dimitris Tsokakis 
> > > > > > > > > > But if you really want to do this hard way you may 
> > use the 
> > > > > code 
> > > > > > > I 
> > > > > > > > > provided in my
> > > > > > > > > > second response.
> > > > > > > > > > 
> > > > > > > > > > Instead of your
> > > > > > > > > >        currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > 
> > > > > > > > > > //     ^ should hold ForeignADX Array
> > > > > > > > > > 
> > > > > > > > > >        for (i=1;i<BarCount;i++)
> > > > > > > > > > 
> > > > > > > > > >        {      
> > > > > > > > > > 
> > > > > > > > > >               MeanADX[i] = MeanADX[i] + currADX[i];
> > > > > > > > > > 
> > > > > > > > > >        }
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > Use:
> > > > > > > > > >   currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > //     ^ should hold ForeignADX Array
> > > > > > > > > > 
> > > > > > > > > >          MeanADX = MeanADX + currADX;
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > Because it is faster and easier to just use AFL array 
> > > > > > > processing 
> > > > > > > > > that allows to add arrays directly.
> > > > > > > > > > 
> > > > > > > > > > Best regards,
> > > > > > > > > > Tomasz Janeczko
> > > > > > > > > > amibroker.com
> > > > > > > > > >   ----- Original Message ----- 
> > > > > > > > > >   From: bluesinvestor 
> > > > > > > > > >   To: amibroker@xxxxxxxxxxxxxxx 
> > > > > > > > > >   Sent: Tuesday, May 13, 2003 8:17 PM
> > > > > > > > > >   Subject: RE: [amibroker] Array processing in Loops 
> > > > > (Tomasz) 
> > > > > > > [was] 
> > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > >   Tomasz,
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   So when a new ticker is loaded in an exploration 
> > MeanADX 
> > > > > will 
> > > > > > > > > remain global and not get reset?
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   Regards,
> > > > > > > > > > 
> > > > > > > > > >   Peter
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   -----Original Message-----
> > > > > > > > > >   From: Tomasz Janeczko [mailto:amibroker@x...] 
> > > > > > > > > >   Sent: Tuesday, May 13, 2003 2:04 PM
> > > > > > > > > >   To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > >   Subject: Re: [amibroker] Array processing in Loops 
> > > > > (Tomasz) 
> > > > > > > [was] 
> > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   Hello,
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   Why do things so much complicated when they are 
> > easy.
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   You CAN iterate through watch list.
> > > > > > > > > > 
> > > > > > > > > >   Simply click on  FILTER button and set it to watch 
> > list 
> > > > > of 
> > > > > > > your 
> > > > > > > > > choice.
> > > > > > > > > > 
> > > > > > > > > >   Then AA will automatically go through your watch 
> > list.
> > > > > > > > > > 
> > > > > > > > > >    
> > > > > > > > > > 
> > > > > > > > > >   Best regards,
> > > > > > > > > >   Tomasz Janeczko
> > > > > > > > > >   amibroker.com
> > > > > > > > > > 
> > > > > > > > > >     ----- Original Message ----- 
> > > > > > > > > > 
> > > > > > > > > >     From: bluesinvestor 
> > > > > > > > > > 
> > > > > > > > > >     To: amibroker@xxxxxxxxxxxxxxx 
> > > > > > > > > > 
> > > > > > > > > >     Sent: Tuesday, May 13, 2003 5:11 PM
> > > > > > > > > > 
> > > > > > > > > >     Subject: [amibroker] Array processing in Loops 
> > (Tomasz) 
> > > > > > > [was] 
> > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     Tomasz,
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     I am trying to find an easy way to code Dimitris' 
> > > > > Powsmooth 
> > > > > > > > > using UM's ABTool DLL (I would like to use a pure AFL 
> > method 
> > > > > but 
> > > > > > > > > cannot seem to find a way to iterate through tickers in 
> > a 
> > > > > > > watchlist 
> > > > > > > > > via AFL).
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     How does AB handle arrays when enclosed in a 
> > loop?  
> > > > > This 
> > > > > > > does 
> > > > > > > > > not seem to work:
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     /* WRITE ONCE */
> > > > > > > > > > 
> > > > > > > > > >     function ForeignADX( symbol, period )
> > > > > > > > > > 
> > > > > > > > > >     {
> > > > > > > > > > 
> > > > > > > > > >          /* save original price arrays */
> > > > > > > > > > 
> > > > > > > > > >          SC = C;
> > > > > > > > > > 
> > > > > > > > > >          SO = O;
> > > > > > > > > > 
> > > > > > > > > >          SH = H;
> > > > > > > > > > 
> > > > > > > > > >          SL = L;
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >          C = Foreign( symbol, "C" );
> > > > > > > > > > 
> > > > > > > > > >          H = Foreign( symbol, "H" );
> > > > > > > > > > 
> > > > > > > > > >          L = Foreign( symbol, "L" );
> > > > > > > > > > 
> > > > > > > > > >          O = Foreign( symbol, "O" );
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >          Result = ADX( period ); // REPLACE THIS BY 
> > ANY AFL 
> > > > > > > FUNCTION
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >          /* restore original arrays */
> > > > > > > > > > 
> > > > > > > > > >          C = SC;
> > > > > > > > > > 
> > > > > > > > > >          O = SO;
> > > > > > > > > > 
> > > > > > > > > >          H = SH;
> > > > > > > > > > 
> > > > > > > > > >          L = SL;
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     return Result;
> > > > > > > > > > 
> > > > > > > > > >     }
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     wl = 0;  // put your watchlist number (0..63) 
> > here; it 
> > > > > > > should 
> > > > > > > > > contain some tickers
> > > > > > > > > > 
> > > > > > > > > >              // (my WL 1 contains the 100 Nasdaq100 
> > tickers)
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     xxABtoolInit();
> > > > > > > > > > 
> > > > > > > > > >     Filter = 1;
> > > > > > > > > > 
> > > > > > > > > >     xtickercount = xxTickerCount(wl);
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     ticker = xxTickerFirst(wl);
> > > > > > > > > > 
> > > > > > > > > >     MeanADX = 0;
> > > > > > > > > > 
> > > > > > > > > >     while(ticker != "")
> > > > > > > > > > 
> > > > > > > > > >     {
> > > > > > > > > > 
> > > > > > > > > >          currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > 
> > > > > > > > > >     //   ^ should hold ForeignADX Array
> > > > > > > > > > 
> > > > > > > > > >          for (i=1;i<BarCount;i++)
> > > > > > > > > > 
> > > > > > > > > >          {      
> > > > > > > > > > 
> > > > > > > > > >                 MeanADX[i] = MeanADX[i] + currADX[i];
> > > > > > > > > > 
> > > > > > > > > >          }
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >          ticker = xxTickerNext(wl);
> > > > > > > > > > 
> > > > > > > > > >     }
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     xxABtoolInit();  //cleanup
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     AddColumn(MeanADX,"MeanADX");
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     Thanks in advance,
> > > > > > > > > > 
> > > > > > > > > >     Peter
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     -----Original Message-----
> > > > > > > > > >     From: DIMITRIS TSOKAKIS [mailto:TSOKAKIS@x...] 
> > > > > > > > > >     Sent: Monday, May 12, 2003 2:39 AM
> > > > > > > > > >     To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > >     Subject: [amibroker] Re: The use of the Powsmooth
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     Peter,
> > > > > > > > > > 
> > > > > > > > > >     thank you for the unexpected [because of time] 
> > reply.
> > > > > > > > > > 
> > > > > > > > > >     Sleep with the idea and talk again "tomorrow".
> > > > > > > > > > 
> > > > > > > > > >     It is 09.30 in Athens now, 32 Celsius and the 
> > summer is 
> > > > > > > already 
> > > > > > > > > at 
> > > > > > > > > > 
> > > > > > > > > >     the corner.
> > > > > > > > > > 
> > > > > > > > > >     Dimitris Tsokakis
> > > > > > > > > > 
> > > > > > > > > >     --- In amibroker@xxxxxxxxxxxxxxx, "bluesinvestor" 
> > > > > > > > > <investor@xxxx> 
> > > > > > > > > > 
> > > > > > > > > >     wrote:
> > > > > > > > > > 
> > > > > > > > > >     > Dimitris,
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Unfortunately it is late here and I cannot come 
> > with 
> > > > > a 
> > > > > > > simple 
> > > > > > > > > > 
> > > > > > > > > >     solution
> > > > > > > > > > 
> > > > > > > > > >     > to 'step' through foreign tickers to get the 
> > ADX 
> > > > > > > variable.  
> > > > > > > > > We would
> > > > > > > > > > 
> > > > > > > > > >     > have to list all the tickers involved.
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > If there is a way (which I do not know or 
> > cannot 
> > > > > think of 
> > > > > > > at 
> > > > > > > > > the 
> > > > > > > > > > 
> > > > > > > > > >     moment)
> > > > > > > > > > 
> > > > > > > > > >     > then the situation would be easy to solve.
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Maybe someone will have a suggestion or 
> > solution by 
> > > > > > > morning.
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Regards,
> > > > > > > > > > 
> > > > > > > > > >     > Peter
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > -----Original Message-----
> > > > > > > > > > 
> > > > > > > > > >     > From: DIMITRIS TSOKAKIS [mailto:TSOKAKIS@x...] 
> > > > > > > > > > 
> > > > > > > > > >     > Sent: Monday, May 12, 2003 1:59 AM
> > > > > > > > > > 
> > > > > > > > > >     > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > 
> > > > > > > > > >     > Subject: [amibroker] Re: The use of the 
> > Powsmooth
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Peter,
> > > > > > > > > > 
> > > > > > > > > >     > to materialize this idea 
> > > > > > > > > > 
> > > > > > > > > >     > 
> > http://groups.yahoo.com/group/amibroker/message/40198
> > > > > > > > > > 
> > > > > > > > > >     > in N100 database we need to write 100 lines with
> > > > > > > > > > 
> > > > > > > > > >     > ADX0=
> > > > > > > > > > 
> > > > > > > > > >     > ADX1=
> > > > > > > > > > 
> > > > > > > > > >     > ADX2=
> > > > > > > > > > 
> > > > > > > > > >     > ...
> > > > > > > > > > 
> > > > > > > > > >     > ADX99=
> > > > > > > > > > 
> > > > > > > > > >     > MeanADX=(ADX0+ADX1+ADX2+...+ADX99)/100;
> > > > > > > > > > 
> > > > > > > > > >     > Since you swim better in the iterations world, 
> > is 
> > > > > there a 
> > > > > > > > > more 
> > > > > > > > > > 
> > > > > > > > > >     > elegant way to do it [through stocknum 
> > perhaps...]
> > > > > > > > > > 
> > > > > > > > > >     > Of course, even if we take it as is, the 
> > advantage is 
> > > > > > > great, 
> > > > > > > > > > 
> > > > > > > > > >     > especially for intraday use.
> > > > > > > > > > 
> > > > > > > > > >     > I suppose we make a STEP here.
> > > > > > > > > > 
> > > > > > > > > >     > Dimitris Tsokakis
> > > > > > > > > > 
> > > > > > > > > >     > --- In 
> > amibroker@xxxxxxxxxxxxxxx, "bluesinvestor" 
> > > > > > > > > <investor@xxxx> 
> > > > > > > > > > 
> > > > > > > > > >     > wrote:
> > > > > > > > > > 
> > > > > > > > > >     > > Dimitris,
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > Without the JavaScript:
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > /*PowSmooth and an application to Dratio*/
> > > > > > > > > > 
> > > > > > > > > >     > > dratio=DEMA(1000*(H-L)/(H+L),20);
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > for(i=2;i<BarCount;i++)
> > > > > > > > > > 
> > > > > > > > > >     > > {
> > > > > > > > > > 
> > > > > > > > > >     > >        t0[i]=(dratio[i]*dratio[i-1]*dratio[i-
> > 2])^
> > > > > (1/3);
> > > > > > > > > > 
> > > > > > > > > >     > >        s0[i]=(dratio[i]*dratio[i-1])^(1/2);
> > > > > > > > > > 
> > > > > > > > > >     > > }
> > > > > > > > > > 
> > > > > > > > > >     > > PowSmooth=(s0+t0)/2;
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > Filter=1;
> > > > > > > > > > 
> > > > > > > > > >     > > AddColumn(dratio,"DRATIO");
> > > > > > > > > > 
> > > > > > > > > >     > > AddColumn(s0,"SQRT");
> > > > > > > > > > 
> > > > > > > > > >     > > AddColumn(t0,"THIRD");
> > > > > > > > > > 
> > > > > > > > > >     > > AddColumn(Powsmooth,"PowSmooth");
> > > > > > > > > > 
> > > > > > > > > >     > > Plot(dratio,"dratio",1,8);
> > > > > > > > > > 
> > > > > > > > > >     > > Plot(PowSmooth,"PowSmooth",7,1);
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > RRR=Powsmooth;// Replace this line with 
> > RRR=dratio; 
> > > > > to 
> > > > > > > see 
> > > > > > > > > the 
> > > > > > > > > > 
> > > > > > > > > >     usual
> > > > > > > > > > 
> > > > > > > > > >     > > Dratioresults
> > > > > > > > > > 
> > > > > > > > > >     > > D1=35;
> > > > > > > > > > 
> > > > > > > > > >     > > F1=RRR>=D1;F2=RRR<=D1;
> > > > > > > > > > 
> > > > > > > > > >     > > Sell=F2;Buy=F1;Buy=ExRem(Buy,Sell);Sell=ExRem
> > > > > (Sell,Buy);
> > > > > > > > > > 
> > > > > > > > > >     > > Short=Sell;Cover=Buy;Short=ExRem
> > > > > > > (Short,Cover);Cover=ExRem
> > > > > > > > > > 
> > > > > > > > > >     > (Cover,Short);
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > Regards,
> > > > > > > > > > 
> > > > > > > > > >     > > Peter
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > -----Original Message-----
> > > > > > > > > > 
> > > > > > > > > >     > > From: Dimitris Tsokakis 
> > [mailto:TSOKAKIS@x...] 
> > > > > > > > > > 
> > > > > > > > > >     > > Sent: Saturday, May 10, 2003 7:19 AM
> > > > > > > > > > 
> > > > > > > > > >     > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > 
> > > > > > > > > >     > > Subject: [amibroker] The use of the Powsmooth
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > The basic property of the Powsmooth 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > http://groups.yahoo.com/group/amibroker/message/40077
> > > > > > > > > > 
> > > > > > > > > >     > > is to filter out fast zigzags, passing 
> > through 
> > > > > them, 
> > > > > > > > > without 
> > > > > > > > > > 
> > > > > > > > > >     > introducing
> > > > > > > > > > 
> > > > > > > > > >     > > important lags.
> > > > > > > > > > 
> > > > > > > > > >     > > When we use a cross level trading system, 
> > many 
> > > > > times we 
> > > > > > > > > loose 
> > > > > > > > > > 
> > > > > > > > > >     money
> > > > > > > > > > 
> > > > > > > > > >     > > because of oscillation of our indicator 
> > around the
> > > > > > > > > > 
> > > > > > > > > >     > > critical cross level. 
> > > > > > > > > > 
> > > > > > > > > >     > > If our cross level is "good", then we should 
> > expect 
> > > > > > > [and we 
> > > > > > > > > shall
> > > > > > > > > > 
> > > > > > > > > >     > > see...] strong ask and bid when we are close 
> > to 
> > > > > this 
> > > > > > > level. 
> > > > > > > > > > 
> > > > > > > > > >     > > The result is the well known repeated 
> > whipsaws, 
> > > > > which 
> > > > > > > > > usually 
> > > > > > > > > > 
> > > > > > > > > >     > annihilate
> > > > > > > > > > 
> > > > > > > > > >     > > our profits.
> > > > > > > > > > 
> > > > > > > > > >     > > Unfortunately, the solution is not to smooth 
> > our 
> > > > > > > nervous 
> > > > > > > > > > 
> > > > > > > > > >     indicator, 
> > > > > > > > > > 
> > > > > > > > > >     > it
> > > > > > > > > > 
> > > > > > > > > >     > > will usually loose its charm to catch quickly 
> > the 
> > > > > > > market 
> > > > > > > > > changes.
> > > > > > > > > > 
> > > > > > > > > >     > > In this case [traders who use fast indicators 
> > will 
> > > > > > > > > understand 
> > > > > > > > > > 
> > > > > > > > > >     very 
> > > > > > > > > > 
> > > > > > > > > >     > well
> > > > > > > > > > 
> > > > > > > > > >     > > this syndrom...] the PowSmooth may offer 
> > great 
> > > > > > > assistance.
> > > > > > > > > > 
> > > > > > > > > >     > > Its smart curve will gently pass between the 
> > > > > > > accumulated 
> > > > > > > > > ziggy 
> > > > > > > > > > 
> > > > > > > > > >     > points,
> > > > > > > > > > 
> > > > > > > > > >     > > avoid cascade entries/exits and substantially 
> > > > > increase 
> > > > > > > our 
> > > > > > > > > > 
> > > > > > > > > >     profits.
> > > > > > > > > > 
> > > > > > > > > >     > > See a characteristic example in the att. gif.
> > > > > > > > > > 
> > > > > > > > > >     > > In the first case, the dratio gives 8 trades 
> > in two 
> > > > > > > months, 
> > > > > > > > > with 
> > > > > > > > > > 
> > > > > > > > > >     a 
> > > > > > > > > > 
> > > > > > > > > >     > final
> > > > > > > > > > 
> > > > > > > > > >     > > +13%, oscillating around the critical level 
> > D=35.
> > > > > > > > > > 
> > > > > > > > > >     > > The PowSmooth, for the same ^NDX period, 
> > gives two 
> > > > > > > clear 
> > > > > > > > > trades 
> > > > > > > > > > 
> > > > > > > > > >     and
> > > > > > > > > > 
> > > > > > > > > >     > > maximizes the profits to +20%.
> > > > > > > > > > 
> > > > > > > > > >     > > [settings buy/sell/short/cover at +1open, 
> > > > > commission 
> > > > > > > 0.5%, 
> > > > > > > > > stops
> > > > > > > > > > 
> > > > > > > > > >     > > disabled]
> > > > > > > > > > 
> > > > > > > > > >     > > The level D=35 is critical for the market, 
> > the 
> > > > > D_ratio 
> > > > > > > > > frequntly
> > > > > > > > > > 
> > > > > > > > > >     > > oscillates up and down, until the market 
> > takes the 
> > > > > > > decision 
> > > > > > > > > to go 
> > > > > > > > > > 
> > > > > > > > > >     > higher
> > > > > > > > > > 
> > > > > > > > > >     > > or lower. 
> > > > > > > > > > 
> > > > > > > > > >     > > The usual D_ratio system gives for the whole 
> > market 
> > > > > > > nice 
> > > > > > > > > profits, 
> > > > > > > > > > 
> > > > > > > > > >     > +340%
> > > > > > > > > > 
> > > > > > > > > >     > > since Jan2000.
> > > > > > > > > > 
> > > > > > > > > >     > > The PowSmooth D_datio makes the difference : 
> > +940% 
> > > > > for 
> > > > > > > the 
> > > > > > > > > same 
> > > > > > > > > > 
> > > > > > > > > >     > period
> > > > > > > > > > 
> > > > > > > > > >     > > and settings.
> > > > > > > > > > 
> > > > > > > > > >     > > For ^NDX we could nearly double the profits:
> > > > > > > > > > 
> > > > > > > > > >     > > Usual D_ratio : +550%, 
> > 37trades/28winners/9losers
> > > > > > > > > > 
> > > > > > > > > >     > > PowSmooth : +1165%, 
> > 27trades/23winners/4losers.
> > > > > > > > > > 
> > > > > > > > > >     > > A +550% is not that bad, a +1165% is much 
> > better.
> > > > > > > > > > 
> > > > > > > > > >     > > For CSCO, the signal generator of this 
> > > > > transcendental 
> > > > > > > > > system 
> > > > > > > > > > 
> > > > > > > > > >     [since 
> > > > > > > > > > 
> > > > > > > > > >     > we
> > > > > > > > > > 
> > > > > > > > > >     > > "borrow" CSCO data for the basic curve] the 
> > > > > situation 
> > > > > > > needs
> > > > > > > > > > 
> > > > > > > > > >     > > no further comments : the comparison is +370% 
> > vs 
> > > > > +2000%.
> > > > > > > > > > 
> > > > > > > > > >     > > If you use fast and ziggy indicators and 
> > Cross 
> > > > > level 
> > > > > > > > > systems, 
> > > > > > > > > > 
> > > > > > > > > >     take a
> > > > > > > > > > 
> > > > > > > > > >     > > look at the PowSmooth, it may make you smile.
> > > > > > > > > > 
> > > > > > > > > >     > > Dimitris Tsokakis
> > > > > > > > > > 
> > > > > > > > > >     > > I use the trancendental CSCO D_ratio code
> > > > > > > > > > 
> > > > > > > > > >     > > /*Powsmooth CSCO D_ratio, written and used by 
> > > > > > > D.Tsokakis, 
> > > > > > > > > Sept 
> > > > > > > > > > 
> > > > > > > > > >     > 2002*/
> > > > > > > > > > 
> > > > > > > > > >     > > H=Foreign("CSCO","H");L=Foreign("CSCO","L");
> > > > > > > > > > 
> > > > > > > > > >     > > dratio=DEMA(1000*(H-L)/(H+L),20);
> > > > > > > > > > 
> > > > > > > > > >     > > EnableScript("jscript");
> > > > > > > > > > 
> > > > > > > > > >     > > <%
> > > > > > > > > > 
> > > > > > > > > >     > > dratio = VBArray( AFL( "dratio" ) ).toArray();
> > > > > > > > > > 
> > > > > > > > > >     > > s=new Array();t=new Array();
> > > > > > > > > > 
> > > > > > > > > >     > > s[0]=0;t[0]=0;
> > > > > > > > > > 
> > > > > > > > > >     > > for(i=1;i<dratio.length;i++)
> > > > > > > > > > 
> > > > > > > > > >     > > {
> > > > > > > > > > 
> > > > > > > > > >     > > {t[i]=Math.pow((dratio[i]*dratio[i-1]*dratio
> > [i-
> > > > > > > 2]),1/3);}
> > > > > > > > > > 
> > > > > > > > > >     > > {s[i]=Math.pow((dratio[i]*dratio[i-1]),1/2);}
> > > > > > > > > > 
> > > > > > > > > >     > > }
> > > > > > > > > > 
> > > > > > > > > >     > > AFL.Var("s0") =s ;
> > > > > > > > > > 
> > > > > > > > > >     > > AFL.Var("t0")=t;
> > > > > > > > > > 
> > > > > > > > > >     > > %>
> > > > > > > > > > 
> > > > > > > > > >     > > Powsmooth=(s0+t0)/2;
> > > > > > > > > > 
> > > > > > > > > >     > > RRR=Powsmooth;// Replace this line with 
> > RRR=dratio; 
> > > > > to 
> > > > > > > see 
> > > > > > > > > the 
> > > > > > > > > > 
> > > > > > > > > >     usual
> > > > > > > > > > 
> > > > > > > > > >     > > Dratioresults
> > > > > > > > > > 
> > > > > > > > > >     > > D1=35;
> > > > > > > > > > 
> > > > > > > > > >     > > F1=RRR>=D1;F2=RRR<=D1;
> > > > > > > > > > 
> > > > > > > > > >     > > Sell=F2;Buy=F1;Buy=ExRem(Buy,Sell);Sell=ExRem
> > > > > (Sell,Buy);
> > > > > > > > > > 
> > > > > > > > > >     > > Short=Sell;Cover=Buy;Short=ExRem
> > > > > > > (Short,Cover);Cover=ExRem
> > > > > > > > > > 
> > > > > > > > > >     > (Cover,Short);
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > Yahoo! Groups Sponsor
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     
> > > > > > > > > 
> > > > > > > 
> > > > > 
> > <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=17
> > > > > > > > > > 
> > > > > > > > > >     > 05
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > 632198:HM/A=1564415/R=0/*http:/www.netflix.com/Default?
> > > > > > > > > > 
> > > > > > > > > >     > mqso=60164784&par
> > > > > > > > > > 
> > > > > > > > > >     > > tid=3170658> 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > >  
> > > > > > > > > > 
> > > > > > > > > >     > > <http://us.adserver.yahoo.com/l?
> > > > > > > > > > 
> > > > > > > > > >     > M=251812.3170658.4537139.1261774/D=egrou
> > > > > > > > > > 
> > > > > > > > > >     > > pmail/S=:HM/A=1564415/rand=998789952> 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > 
> > > > > > > > > >     > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > 
> > > > > > > > > >     > > -----------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     > > Post AmiQuote-related messages ONLY to: 
> > > > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > > 
> > > > > > > > > >     > > (Web page: 
> > > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > 
> > > > > > > > > >     > > --------------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     > > Check group FAQ at:
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >     > > 
> > > > > > > > > > 
> > > > > > > > > >     > > Your use of Yahoo! Groups is subject to the 
> > Yahoo!
> > > > > > > > > > 
> > > > > > > > > >     > > <http://docs.yahoo.com/info/terms/>  Terms of 
> > > > > Service.
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > 
> > > > > > > > > >     > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > 
> > > > > > > > > >     > -----------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     > Post AmiQuote-related messages ONLY to: 
> > > > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > > 
> > > > > > > > > >     > (Web page: 
> > > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > 
> > > > > > > > > >     > --------------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     > Check group FAQ at:
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >     > 
> > > > > > > > > > 
> > > > > > > > > >     > Your use of Yahoo! Groups is subject to
> > > > > > > > > > 
> > > > > > > > > >     > http://docs.yahoo.com/info/terms/
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     ------------------------ Yahoo! Groups Sponsor ---
> > ------
> > > > > ----
> > > > > > > ----
> > > > > > > > > ----~-->
> > > > > > > > > > 
> > > > > > > > > >     Rent DVDs from home.
> > > > > > > > > > 
> > > > > > > > > >     Over 14,500 titles. Free Shipping
> > > > > > > > > > 
> > > > > > > > > >     & No Late Fees. Try Netflix for FREE!
> > > > > > > > > > 
> > > > > > > > > >     
> > http://us.click.yahoo.com/BVVfoB/hP.FAA/uetFAA/GHeqlB/TM
> > > > > > > > > > 
> > > > > > > > > >     --------------------------------------------------
> > ------
> > > > > ----
> > > > > > > ----
> > > > > > > > > -----~->
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > 
> > > > > > > > > >     Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > 
> > > > > > > > > >     -----------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     Post AmiQuote-related messages ONLY to: 
> > > > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > > 
> > > > > > > > > >     (Web page: 
> > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > 
> > > > > > > > > >     --------------------------------------------
> > > > > > > > > > 
> > > > > > > > > >     Check group FAQ at: 
> > > > > > > > > 
> > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > >     Your use of Yahoo! Groups is subject to 
> > > > > > > > > http://docs.yahoo.com/info/terms/ 
> > > > > > > > > > 
> > > > > > > > > >      
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > >     Send BUG REPORTS to bugs@xxxx
> > > > > > > > > >     Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > >     -----------------------------------------
> > > > > > > > > >     Post AmiQuote-related messages ONLY to: 
> > > > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > >     (Web page: 
> > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > >     --------------------------------------------
> > > > > > > > > >     Check group FAQ at: 
> > > > > > > > > 
> > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >     Your use of Yahoo! Groups is subject to the 
> > Yahoo! 
> > > > > Terms of 
> > > > > > > > > Service. 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > >   Send BUG REPORTS to bugs@xxxx
> > > > > > > > > >   Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > >   -----------------------------------------
> > > > > > > > > >   Post AmiQuote-related messages ONLY to: 
> > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > >   (Web page: 
> > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > >   --------------------------------------------
> > > > > > > > > >   Check group FAQ at: 
> > > > > > > > > 
> > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >   Your use of Yahoo! Groups is subject to the Yahoo! 
> > Terms 
> > > > > of 
> > > > > > > > > Service. 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > >         Yahoo! Groups Sponsor 
> > > > > > > > > >        
> > > > > > > > > >        
> > > > > > > > > > 
> > > > > > > > > >   Send BUG REPORTS to bugs@xxxx
> > > > > > > > > >   Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > >   -----------------------------------------
> > > > > > > > > >   Post AmiQuote-related messages ONLY to: 
> > > > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > >   (Web page: 
> > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > >   --------------------------------------------
> > > > > > > > > >   Check group FAQ at: 
> > > > > > > > > 
> > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > > 
> > > > > > > > > >   Your use of Yahoo! Groups is subject to the Yahoo! 
> > Terms 
> > > > > of 
> > > > > > > > > Service.
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > -----------------------------------------
> > > > > > > > > Post AmiQuote-related messages ONLY to: 
> > > > > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > > > (Web page: 
> > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > --------------------------------------------
> > > > > > > > > Check group FAQ at: 
> > > > > > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > > > 
> > > > > > > > > Your use of Yahoo! Groups is subject to 
> > > > > > > http://docs.yahoo.com/info/terms/ 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > >
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > -----------------------------------------
> > > > > > > Post AmiQuote-related messages ONLY to: 
> > amiquote@xxxxxxxxxxxxxxx 
> > > > > > > (Web page: http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > --------------------------------------------
> > > > > > > Check group FAQ at: 
> > > > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > > > 
> > > > > > > Your use of Yahoo! Groups is subject to 
> > > > > http://docs.yahoo.com/info/terms/ 
> > > > > > > 
> > > > > > > 
> > > > > > >
> > > > > 
> > > > > 
> > > > > 
> > > > > Send BUG REPORTS to bugs@xxxx
> > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > -----------------------------------------
> > > > > Post AmiQuote-related messages ONLY to: 
> > amiquote@xxxxxxxxxxxxxxx 
> > > > > (Web page: http://groups.yahoo.com/group/amiquote/messages/)
> > > > > --------------------------------------------
> > > > > Check group FAQ at:
> > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> > > > > 
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/ 
> > > > > 
> > > > > 
> > > > >
> 
> 
> 
> Send BUG REPORTS to bugs@xxxxxxxxxxxxx
> Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
> -----------------------------------------
> Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx 
> (Web page: http://groups.yahoo.com/group/amiquote/messages/)
> --------------------------------------------
> Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get A Free Psychic Reading! Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/Lj3uPC/Me7FAA/uetFAA/GHeqlB/TM
---------------------------------------------------------------------~->

Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx 
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/