PureBytes Links
Trading Reference Links
|
Tomasz,
thank you very much for the fast solution.
Dimitris Tsokakis
--- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <amibroker@xxxx>
wrote:
> Hello,
>
> Now (using 4.37.0) it is possible to write it entirely in AFL
without listing
>
> /* note: if given watch list contains lots of symbols
> ** performance may be poor
> */
> function CreateAverageForWatchList( listnum )
> {
> // retrive comma-separated list of symbols in watch list
> list = GetCategorySymbols( categoryWatchlist, listnum );
>
> Average = 0; // just in case there are no watch list members
>
> for( i = 0; ( sym = StrExtract( list, i ) ) != ""; i++ )
> {
> f = Foreign( sym, "C" );
> if( i == 0 ) Average = f;
> else Average = Average + f;
> }
>
> return Average / i; // divide by number of components
> }
>
> Plot( CreateAverageForWatchList( 1 ), "Avg of WL 1", colorGreen );
>
>
>
> Best regards,
> Tomasz Janeczko
> amibroker.com
> ----- Original Message -----
> From: "MarkF2" <feierstein@xxxx>
> To: <amibroker@xxxxxxxxxxxxxxx>
> Sent: Friday, May 16, 2003 4:05 PM
> Subject: [amibroker] Array processing in Loops (Dimitris) [was] Re:
The use of the Powsmooth
>
>
> > Dimitris,
> > Thanks for laying this out so clearly for me. The light bulb
finally
> > went on (in my mind, it's an American expression).
> > Mark
> > --- In amibroker@xxxxxxxxxxxxxxx, "DIMITRIS TSOKAKIS"
<TSOKAKIS@xxxx>
> > wrote:
> > > Mark,
> > > Tomasz replies to the subject were
> > > http://groups.yahoo.com/group/amibroker/message/40306
> > > http://groups.yahoo.com/group/amibroker/message/40312
> > > http://groups.yahoo.com/group/amibroker/message/40313
> > > http://groups.yahoo.com/group/amibroker/message/40321
> > > http://groups.yahoo.com/group/amibroker/message/40326
> > > Especially in #40312, the function GetTicker( index ) should
need 100
> > > if/else
> > > lines to change Names to numbrers [for an 100 stocks database]
> > > It seems hard to avoid this step.
> > > In my "naive" Solution2 at
> > > http://groups.yahoo.com/group/amibroker/message/40414 I could
not
> > > avoid writing the 100 names.
> > > The advantage of #40312 is that you do not have to repeat the
> > > indicator formula 100 times, you need to define ONCE an
indicator
> > > function.
> > > It is interesting of course, but does not overcomes the main
> > > disadvantage of the 100 names [note that you should change the
code
> > > lines whenever the N100 changes some members...]
> > > I hoped, as I wrote at the end of #40414, to "a flexible IB
code to
> > > read internally the database names and give the final MACDBULL"
but
> > > it is N/A for now.
> > > In other words, we do not have in IB the "Apply To"
possibility,
> > > which plays a very important role in AA: When we select Apply
to WL4,
> > > the program will iterate through all WL4 stocks without any
care for
> > > their names or population.
> > > I do not know how to "read" the WL4 names from IB window.
> > > If something will change, I will revert.
> > > Dimitris Tsokakis
> > >
> > >
> > > --- In amibroker@xxxxxxxxxxxxxxx, "MarkF2" <feierstein@xxxx>
wrote:
> > > > I'm also confused by this but then again, I'm not much of a
> > > programmer
> > > > and I'm just beginning to learn about loops. So if anyone
ever puts
> > > > together the *complete code* for doing any composite function
with
> > > > loops, *without* a plugin or having to individually list all
the
> > > > stocks that are used to calculate it, I for one would love to
see
> > > it.
> > > >
> > > > Mark
> > > >
> > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
<amibroker@xxxx>
> > > > wrote:
> > > > > Dimitris,
> > > > >
> > > > > I have provided 2 versions: one that did not require any
plugin
> > > > > and one that required plugin.
> > > > >
> > > > > I hope that this addresses your concern.
> > > > >
> > > > > Best regards,
> > > > > Tomasz Janeczko
> > > > > amibroker.com
> > > > > ----- Original Message -----
> > > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > Sent: Thursday, May 15, 2003 1:21 PM
> > > > > Subject: [amibroker] Array processing in Loops (Tomasz)
[was] Re:
> > > > The use of the Powsmooth
> > > > >
> > > > >
> > > > > > Thank you Tomasz, but, this solution was through some 3rd
party
> > > > > > plugin, as far as I understand.
> > > > > > I do not know what other users may do, but I would never
trade
> > > a
> > > > > > single euro on some unauthorised plugin, useful perhaps
for the
> > > > > > creator.
> > > > > > If there is any AFL solution to the question I described
at
> > > > > > http://groups.yahoo.com/group/amibroker/message/40414
> > > > > > please advise.
> > > > > > Else, leave the solution2 as is, it works fine and, above
all,
> > > I do
> > > > > > not expect ANY surprises when the application time
comes !!
> > > > > > I have many reasons to be an amibroker user, I have no
reason
> > > to
> > > > > > become a 3rd party experimentalist.
> > > > > > Dimitris Tsokakis
> > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
> > > <amibroker@xxxx>
> > > > > > wrote:
> > > > > > > Dimitris,
> > > > > > >
> > > > > > > The code provided previously by me works in Indicator
Builder
> > > too.
> > > > > > > Just replace AddColumn by Plot function.
> > > > > > >
> > > > > > > Best regards,
> > > > > > > Tomasz Janeczko
> > > > > > > amibroker.com
> > > > > > > ----- Original Message -----
> > > > > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > > > Sent: Wednesday, May 14, 2003 10:47 PM
> > > > > > > Subject: [amibroker] Array processing in Loops (Tomasz)
[was]
> > > Re:
> > > > > > The use of the Powsmooth
> > > > > > >
> > > > > > >
> > > > > > > > Tomasz,
> > > > > > > > thank you for your reply.
> > > > > > > > I want to plot MACDBULL, for example, in IB.
> > > > > > > > Your dialogue with Peter was for AA through
exploration.
> > > > > > > > If I miss something, please advise.
> > > > > > > > Dimitris Tsokakis
> > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
> > > > > > <amibroker@xxxx>
> > > > > > > > wrote:
> > > > > > > > > Dimitris,
> > > > > > > > >
> > > > > > > > > I provided already the code that calculates the
composite
> > > > > > > > > without AddToComposite, but it requires version
4.32.0 or
> > > higher
> > > > > > > > > (4.36.0 for example) because it uses 'for' loop.
> > > > > > > > >
> > > > > > > > > Once you upgrade to the recent version you will
enjoy
> > > > > > > > > the power of native looping in AFL.
> > > > > > > > >
> > > > > > > > > Best regards,
> > > > > > > > > Tomasz Janeczko
> > > > > > > > > amibroker.com
> > > > > > > > > ----- Original Message -----
> > > > > > > > > From: "DIMITRIS TSOKAKIS" <TSOKAKIS@xxxx>
> > > > > > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > > > > > Sent: Wednesday, May 14, 2003 9:43 PM
> > > > > > > > > Subject: [amibroker] Array processing in Loops
(Tomasz)
> > > [was]
> > > > > > Re:
> > > > > > > > The use of the Powsmooth
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz
Janeczko"
> > > > > > > > <amibroker@xxxx>
> > > > > > > > > > wrote:
> > > > > > > > > > > Hello,
> > > > > > > > > > >
> > > > > > > > > > > No, I meant use AddToComposite that is exactly
> > > provided for
> > > > > > > > > > creation of composites.
> > > > > > > > > >
> > > > > > > > > > Tomasz,
> > > > > > > > > > AddToComposite scan can create composites, if you
are
> > > free to
> > > > > > > > scan
> > > > > > > > > > and you have nothing else to do.
> > > > > > > > > > It is not always that easy.
> > > > > > > > > > Since there is a small distance from theory to
> > > application,
> > > > > > > > please
> > > > > > > > > > try to understand the problem of the last hour
> > > decision. i
> > > > > > tried
> > > > > > > > to
> > > > > > > > > > give a rough example at the "No title" message.
The
> > > real
> > > > > > thing is
> > > > > > > > > > much more complicated, when one has to check more
than
> > > two
> > > > > > > > > > conditions .
> > > > > > > > > > TIA
> > > > > > > > > > Dimitris Tsokakis
> > > > > > > > > > > But if you really want to do this hard way you
may
> > > use the
> > > > > > code
> > > > > > > > I
> > > > > > > > > > provided in my
> > > > > > > > > > > second response.
> > > > > > > > > > >
> > > > > > > > > > > Instead of your
> > > > > > > > > > > currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > >
> > > > > > > > > > > // ^ should hold ForeignADX Array
> > > > > > > > > > >
> > > > > > > > > > > for (i=1;i<BarCount;i++)
> > > > > > > > > > >
> > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > MeanADX[i] = MeanADX[i] + currADX
[i];
> > > > > > > > > > >
> > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Use:
> > > > > > > > > > > currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > > // ^ should hold ForeignADX Array
> > > > > > > > > > >
> > > > > > > > > > > MeanADX = MeanADX + currADX;
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Because it is faster and easier to just use AFL
array
> > > > > > > > processing
> > > > > > > > > > that allows to add arrays directly.
> > > > > > > > > > >
> > > > > > > > > > > Best regards,
> > > > > > > > > > > Tomasz Janeczko
> > > > > > > > > > > amibroker.com
> > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > From: bluesinvestor
> > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > > Sent: Tuesday, May 13, 2003 8:17 PM
> > > > > > > > > > > Subject: RE: [amibroker] Array processing in
Loops
> > > > > > (Tomasz)
> > > > > > > > [was]
> > > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Tomasz,
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > So when a new ticker is loaded in an
exploration
> > > MeanADX
> > > > > > will
> > > > > > > > > > remain global and not get reset?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Regards,
> > > > > > > > > > >
> > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: Tomasz Janeczko [mailto:amibroker@x...]
> > > > > > > > > > > Sent: Tuesday, May 13, 2003 2:04 PM
> > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > > Subject: Re: [amibroker] Array processing in
Loops
> > > > > > (Tomasz)
> > > > > > > > [was]
> > > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Hello,
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Why do things so much complicated when they
are
> > > easy.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > You CAN iterate through watch list.
> > > > > > > > > > >
> > > > > > > > > > > Simply click on FILTER button and set it to
watch
> > > list
> > > > > > of
> > > > > > > > your
> > > > > > > > > > choice.
> > > > > > > > > > >
> > > > > > > > > > > Then AA will automatically go through your
watch
> > > list.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Best regards,
> > > > > > > > > > > Tomasz Janeczko
> > > > > > > > > > > amibroker.com
> > > > > > > > > > >
> > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > >
> > > > > > > > > > > From: bluesinvestor
> > > > > > > > > > >
> > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > Sent: Tuesday, May 13, 2003 5:11 PM
> > > > > > > > > > >
> > > > > > > > > > > Subject: [amibroker] Array processing in
Loops
> > > (Tomasz)
> > > > > > > > [was]
> > > > > > > > > > Re: The use of the Powsmooth
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Tomasz,
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > I am trying to find an easy way to code
Dimitris'
> > > > > > Powsmooth
> > > > > > > > > > using UM's ABTool DLL (I would like to use a pure
AFL
> > > method
> > > > > > but
> > > > > > > > > > cannot seem to find a way to iterate through
tickers in
> > > a
> > > > > > > > watchlist
> > > > > > > > > > via AFL).
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > How does AB handle arrays when enclosed in
a
> > > loop?
> > > > > > This
> > > > > > > > does
> > > > > > > > > > not seem to work:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > /* WRITE ONCE */
> > > > > > > > > > >
> > > > > > > > > > > function ForeignADX( symbol, period )
> > > > > > > > > > >
> > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > /* save original price arrays */
> > > > > > > > > > >
> > > > > > > > > > > SC = C;
> > > > > > > > > > >
> > > > > > > > > > > SO = O;
> > > > > > > > > > >
> > > > > > > > > > > SH = H;
> > > > > > > > > > >
> > > > > > > > > > > SL = L;
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > C = Foreign( symbol, "C" );
> > > > > > > > > > >
> > > > > > > > > > > H = Foreign( symbol, "H" );
> > > > > > > > > > >
> > > > > > > > > > > L = Foreign( symbol, "L" );
> > > > > > > > > > >
> > > > > > > > > > > O = Foreign( symbol, "O" );
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Result = ADX( period ); // REPLACE
THIS BY
> > > ANY AFL
> > > > > > > > FUNCTION
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > /* restore original arrays */
> > > > > > > > > > >
> > > > > > > > > > > C = SC;
> > > > > > > > > > >
> > > > > > > > > > > O = SO;
> > > > > > > > > > >
> > > > > > > > > > > H = SH;
> > > > > > > > > > >
> > > > > > > > > > > L = SL;
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > return Result;
> > > > > > > > > > >
> > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > wl = 0; // put your watchlist number
(0..63)
> > > here; it
> > > > > > > > should
> > > > > > > > > > contain some tickers
> > > > > > > > > > >
> > > > > > > > > > > // (my WL 1 contains the 100
Nasdaq100
> > > tickers)
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > xxABtoolInit();
> > > > > > > > > > >
> > > > > > > > > > > Filter = 1;
> > > > > > > > > > >
> > > > > > > > > > > xtickercount = xxTickerCount(wl);
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ticker = xxTickerFirst(wl);
> > > > > > > > > > >
> > > > > > > > > > > MeanADX = 0;
> > > > > > > > > > >
> > > > > > > > > > > while(ticker != "")
> > > > > > > > > > >
> > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > currADX = ForeignADX( ticker, 14 );
> > > > > > > > > > >
> > > > > > > > > > > // ^ should hold ForeignADX Array
> > > > > > > > > > >
> > > > > > > > > > > for (i=1;i<BarCount;i++)
> > > > > > > > > > >
> > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > MeanADX[i] = MeanADX[i] +
currADX[i];
> > > > > > > > > > >
> > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ticker = xxTickerNext(wl);
> > > > > > > > > > >
> > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > xxABtoolInit(); //cleanup
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > AddColumn(MeanADX,"MeanADX");
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Thanks in advance,
> > > > > > > > > > >
> > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: DIMITRIS TSOKAKIS
[mailto:TSOKAKIS@x...]
> > > > > > > > > > > Sent: Monday, May 12, 2003 2:39 AM
> > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > > Subject: [amibroker] Re: The use of the
Powsmooth
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Peter,
> > > > > > > > > > >
> > > > > > > > > > > thank you for the unexpected [because of
time]
> > > reply.
> > > > > > > > > > >
> > > > > > > > > > > Sleep with the idea and talk
again "tomorrow".
> > > > > > > > > > >
> > > > > > > > > > > It is 09.30 in Athens now, 32 Celsius and
the
> > > summer is
> > > > > > > > already
> > > > > > > > > > at
> > > > > > > > > > >
> > > > > > > > > > > the corner.
> > > > > > > > > > >
> > > > > > > > > > > Dimitris Tsokakis
> > > > > > > > > > >
> > > > > > > > > > > --- In
amibroker@xxxxxxxxxxxxxxx, "bluesinvestor"
> > > > > > > > > > <investor@xxxx>
> > > > > > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > Dimitris,
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Unfortunately it is late here and I
cannot come
> > > with
> > > > > > a
> > > > > > > > simple
> > > > > > > > > > >
> > > > > > > > > > > solution
> > > > > > > > > > >
> > > > > > > > > > > > to 'step' through foreign tickers to get
the
> > > ADX
> > > > > > > > variable.
> > > > > > > > > > We would
> > > > > > > > > > >
> > > > > > > > > > > > have to list all the tickers involved.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > If there is a way (which I do not know or
> > > cannot
> > > > > > think of
> > > > > > > > at
> > > > > > > > > > the
> > > > > > > > > > >
> > > > > > > > > > > moment)
> > > > > > > > > > >
> > > > > > > > > > > > then the situation would be easy to solve.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Maybe someone will have a suggestion or
> > > solution by
> > > > > > > > morning.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Regards,
> > > > > > > > > > >
> > > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > >
> > > > > > > > > > > > From: DIMITRIS TSOKAKIS
[mailto:TSOKAKIS@x...]
> > > > > > > > > > >
> > > > > > > > > > > > Sent: Monday, May 12, 2003 1:59 AM
> > > > > > > > > > >
> > > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > > Subject: [amibroker] Re: The use of the
> > > Powsmooth
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Peter,
> > > > > > > > > > >
> > > > > > > > > > > > to materialize this idea
> > > > > > > > > > >
> > > > > > > > > > > >
> > > http://groups.yahoo.com/group/amibroker/message/40198
> > > > > > > > > > >
> > > > > > > > > > > > in N100 database we need to write 100
lines with
> > > > > > > > > > >
> > > > > > > > > > > > ADX0=
> > > > > > > > > > >
> > > > > > > > > > > > ADX1=
> > > > > > > > > > >
> > > > > > > > > > > > ADX2=
> > > > > > > > > > >
> > > > > > > > > > > > ...
> > > > > > > > > > >
> > > > > > > > > > > > ADX99=
> > > > > > > > > > >
> > > > > > > > > > > > MeanADX=(ADX0+ADX1+ADX2+...+ADX99)/100;
> > > > > > > > > > >
> > > > > > > > > > > > Since you swim better in the iterations
world,
> > > is
> > > > > > there a
> > > > > > > > > > more
> > > > > > > > > > >
> > > > > > > > > > > > elegant way to do it [through stocknum
> > > perhaps...]
> > > > > > > > > > >
> > > > > > > > > > > > Of course, even if we take it as is, the
> > > advantage is
> > > > > > > > great,
> > > > > > > > > > >
> > > > > > > > > > > > especially for intraday use.
> > > > > > > > > > >
> > > > > > > > > > > > I suppose we make a STEP here.
> > > > > > > > > > >
> > > > > > > > > > > > Dimitris Tsokakis
> > > > > > > > > > >
> > > > > > > > > > > > --- In
> > > amibroker@xxxxxxxxxxxxxxx, "bluesinvestor"
> > > > > > > > > > <investor@xxxx>
> > > > > > > > > > >
> > > > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > > Dimitris,
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Without the JavaScript:
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > /*PowSmooth and an application to
Dratio*/
> > > > > > > > > > >
> > > > > > > > > > > > > dratio=DEMA(1000*(H-L)/(H+L),20);
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > for(i=2;i<BarCount;i++)
> > > > > > > > > > >
> > > > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > > > t0[i]=(dratio[i]*dratio[i-1]
*dratio[i-
> > > 2])^
> > > > > > (1/3);
> > > > > > > > > > >
> > > > > > > > > > > > > s0[i]=(dratio[i]*dratio[i-1])^
(1/2);
> > > > > > > > > > >
> > > > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > > > > PowSmooth=(s0+t0)/2;
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Filter=1;
> > > > > > > > > > >
> > > > > > > > > > > > > AddColumn(dratio,"DRATIO");
> > > > > > > > > > >
> > > > > > > > > > > > > AddColumn(s0,"SQRT");
> > > > > > > > > > >
> > > > > > > > > > > > > AddColumn(t0,"THIRD");
> > > > > > > > > > >
> > > > > > > > > > > > > AddColumn(Powsmooth,"PowSmooth");
> > > > > > > > > > >
> > > > > > > > > > > > > Plot(dratio,"dratio",1,8);
> > > > > > > > > > >
> > > > > > > > > > > > > Plot(PowSmooth,"PowSmooth",7,1);
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > RRR=Powsmooth;// Replace this line with
> > > RRR=dratio;
> > > > > > to
> > > > > > > > see
> > > > > > > > > > the
> > > > > > > > > > >
> > > > > > > > > > > usual
> > > > > > > > > > >
> > > > > > > > > > > > > Dratioresults
> > > > > > > > > > >
> > > > > > > > > > > > > D1=35;
> > > > > > > > > > >
> > > > > > > > > > > > > F1=RRR>=D1;F2=RRR<=D1;
> > > > > > > > > > >
> > > > > > > > > > > > > Sell=F2;Buy=F1;Buy=ExRem
(Buy,Sell);Sell=ExRem
> > > > > > (Sell,Buy);
> > > > > > > > > > >
> > > > > > > > > > > > > Short=Sell;Cover=Buy;Short=ExRem
> > > > > > > > (Short,Cover);Cover=ExRem
> > > > > > > > > > >
> > > > > > > > > > > > (Cover,Short);
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Regards,
> > > > > > > > > > >
> > > > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > >
> > > > > > > > > > > > > From: Dimitris Tsokakis
> > > [mailto:TSOKAKIS@x...]
> > > > > > > > > > >
> > > > > > > > > > > > > Sent: Saturday, May 10, 2003 7:19 AM
> > > > > > > > > > >
> > > > > > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > > > Subject: [amibroker] The use of the
Powsmooth
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > The basic property of the Powsmooth
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > http://groups.yahoo.com/group/amibroker/message/40077
> > > > > > > > > > >
> > > > > > > > > > > > > is to filter out fast zigzags, passing
> > > through
> > > > > > them,
> > > > > > > > > > without
> > > > > > > > > > >
> > > > > > > > > > > > introducing
> > > > > > > > > > >
> > > > > > > > > > > > > important lags.
> > > > > > > > > > >
> > > > > > > > > > > > > When we use a cross level trading
system,
> > > many
> > > > > > times we
> > > > > > > > > > loose
> > > > > > > > > > >
> > > > > > > > > > > money
> > > > > > > > > > >
> > > > > > > > > > > > > because of oscillation of our indicator
> > > around the
> > > > > > > > > > >
> > > > > > > > > > > > > critical cross level.
> > > > > > > > > > >
> > > > > > > > > > > > > If our cross level is "good", then we
should
> > > expect
> > > > > > > > [and we
> > > > > > > > > > shall
> > > > > > > > > > >
> > > > > > > > > > > > > see...] strong ask and bid when we are
close
> > > to
> > > > > > this
> > > > > > > > level.
> > > > > > > > > > >
> > > > > > > > > > > > > The result is the well known repeated
> > > whipsaws,
> > > > > > which
> > > > > > > > > > usually
> > > > > > > > > > >
> > > > > > > > > > > > annihilate
> > > > > > > > > > >
> > > > > > > > > > > > > our profits.
> > > > > > > > > > >
> > > > > > > > > > > > > Unfortunately, the solution is not to
smooth
> > > our
> > > > > > > > nervous
> > > > > > > > > > >
> > > > > > > > > > > indicator,
> > > > > > > > > > >
> > > > > > > > > > > > it
> > > > > > > > > > >
> > > > > > > > > > > > > will usually loose its charm to catch
quickly
> > > the
> > > > > > > > market
> > > > > > > > > > changes.
> > > > > > > > > > >
> > > > > > > > > > > > > In this case [traders who use fast
indicators
> > > will
> > > > > > > > > > understand
> > > > > > > > > > >
> > > > > > > > > > > very
> > > > > > > > > > >
> > > > > > > > > > > > well
> > > > > > > > > > >
> > > > > > > > > > > > > this syndrom...] the PowSmooth may
offer
> > > great
> > > > > > > > assistance.
> > > > > > > > > > >
> > > > > > > > > > > > > Its smart curve will gently pass
between the
> > > > > > > > accumulated
> > > > > > > > > > ziggy
> > > > > > > > > > >
> > > > > > > > > > > > points,
> > > > > > > > > > >
> > > > > > > > > > > > > avoid cascade entries/exits and
substantially
> > > > > > increase
> > > > > > > > our
> > > > > > > > > > >
> > > > > > > > > > > profits.
> > > > > > > > > > >
> > > > > > > > > > > > > See a characteristic example in the
att. gif.
> > > > > > > > > > >
> > > > > > > > > > > > > In the first case, the dratio gives 8
trades
> > > in two
> > > > > > > > months,
> > > > > > > > > > with
> > > > > > > > > > >
> > > > > > > > > > > a
> > > > > > > > > > >
> > > > > > > > > > > > final
> > > > > > > > > > >
> > > > > > > > > > > > > +13%, oscillating around the critical
level
> > > D=35.
> > > > > > > > > > >
> > > > > > > > > > > > > The PowSmooth, for the same ^NDX
period,
> > > gives two
> > > > > > > > clear
> > > > > > > > > > trades
> > > > > > > > > > >
> > > > > > > > > > > and
> > > > > > > > > > >
> > > > > > > > > > > > > maximizes the profits to +20%.
> > > > > > > > > > >
> > > > > > > > > > > > > [settings buy/sell/short/cover at
+1open,
> > > > > > commission
> > > > > > > > 0.5%,
> > > > > > > > > > stops
> > > > > > > > > > >
> > > > > > > > > > > > > disabled]
> > > > > > > > > > >
> > > > > > > > > > > > > The level D=35 is critical for the
market,
> > > the
> > > > > > D_ratio
> > > > > > > > > > frequntly
> > > > > > > > > > >
> > > > > > > > > > > > > oscillates up and down, until the
market
> > > takes the
> > > > > > > > decision
> > > > > > > > > > to go
> > > > > > > > > > >
> > > > > > > > > > > > higher
> > > > > > > > > > >
> > > > > > > > > > > > > or lower.
> > > > > > > > > > >
> > > > > > > > > > > > > The usual D_ratio system gives for the
whole
> > > market
> > > > > > > > nice
> > > > > > > > > > profits,
> > > > > > > > > > >
> > > > > > > > > > > > +340%
> > > > > > > > > > >
> > > > > > > > > > > > > since Jan2000.
> > > > > > > > > > >
> > > > > > > > > > > > > The PowSmooth D_datio makes the
difference :
> > > +940%
> > > > > > for
> > > > > > > > the
> > > > > > > > > > same
> > > > > > > > > > >
> > > > > > > > > > > > period
> > > > > > > > > > >
> > > > > > > > > > > > > and settings.
> > > > > > > > > > >
> > > > > > > > > > > > > For ^NDX we could nearly double the
profits:
> > > > > > > > > > >
> > > > > > > > > > > > > Usual D_ratio : +550%,
> > > 37trades/28winners/9losers
> > > > > > > > > > >
> > > > > > > > > > > > > PowSmooth : +1165%,
> > > 27trades/23winners/4losers.
> > > > > > > > > > >
> > > > > > > > > > > > > A +550% is not that bad, a +1165% is
much
> > > better.
> > > > > > > > > > >
> > > > > > > > > > > > > For CSCO, the signal generator of this
> > > > > > transcendental
> > > > > > > > > > system
> > > > > > > > > > >
> > > > > > > > > > > [since
> > > > > > > > > > >
> > > > > > > > > > > > we
> > > > > > > > > > >
> > > > > > > > > > > > > "borrow" CSCO data for the basic curve]
the
> > > > > > situation
> > > > > > > > needs
> > > > > > > > > > >
> > > > > > > > > > > > > no further comments : the comparison is
+370%
> > > vs
> > > > > > +2000%.
> > > > > > > > > > >
> > > > > > > > > > > > > If you use fast and ziggy indicators
and
> > > Cross
> > > > > > level
> > > > > > > > > > systems,
> > > > > > > > > > >
> > > > > > > > > > > take a
> > > > > > > > > > >
> > > > > > > > > > > > > look at the PowSmooth, it may make you
smile.
> > > > > > > > > > >
> > > > > > > > > > > > > Dimitris Tsokakis
> > > > > > > > > > >
> > > > > > > > > > > > > I use the trancendental CSCO D_ratio
code
> > > > > > > > > > >
> > > > > > > > > > > > > /*Powsmooth CSCO D_ratio, written and
used by
> > > > > > > > D.Tsokakis,
> > > > > > > > > > Sept
> > > > > > > > > > >
> > > > > > > > > > > > 2002*/
> > > > > > > > > > >
> > > > > > > > > > > > > H=Foreign("CSCO","H");L=Foreign
("CSCO","L");
> > > > > > > > > > >
> > > > > > > > > > > > > dratio=DEMA(1000*(H-L)/(H+L),20);
> > > > > > > > > > >
> > > > > > > > > > > > > EnableScript("jscript");
> > > > > > > > > > >
> > > > > > > > > > > > > <%
> > > > > > > > > > >
> > > > > > > > > > > > > dratio = VBArray( AFL
( "dratio" ) ).toArray();
> > > > > > > > > > >
> > > > > > > > > > > > > s=new Array();t=new Array();
> > > > > > > > > > >
> > > > > > > > > > > > > s[0]=0;t[0]=0;
> > > > > > > > > > >
> > > > > > > > > > > > > for(i=1;i<dratio.length;i++)
> > > > > > > > > > >
> > > > > > > > > > > > > {
> > > > > > > > > > >
> > > > > > > > > > > > > {t[i]=Math.pow((dratio[i]*dratio[i-1]
*dratio
> > > [i-
> > > > > > > > 2]),1/3);}
> > > > > > > > > > >
> > > > > > > > > > > > > {s[i]=Math.pow((dratio[i]*dratio[i-
1]),1/2);}
> > > > > > > > > > >
> > > > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > > > > AFL.Var("s0") =s ;
> > > > > > > > > > >
> > > > > > > > > > > > > AFL.Var("t0")=t;
> > > > > > > > > > >
> > > > > > > > > > > > > %>
> > > > > > > > > > >
> > > > > > > > > > > > > Powsmooth=(s0+t0)/2;
> > > > > > > > > > >
> > > > > > > > > > > > > RRR=Powsmooth;// Replace this line with
> > > RRR=dratio;
> > > > > > to
> > > > > > > > see
> > > > > > > > > > the
> > > > > > > > > > >
> > > > > > > > > > > usual
> > > > > > > > > > >
> > > > > > > > > > > > > Dratioresults
> > > > > > > > > > >
> > > > > > > > > > > > > D1=35;
> > > > > > > > > > >
> > > > > > > > > > > > > F1=RRR>=D1;F2=RRR<=D1;
> > > > > > > > > > >
> > > > > > > > > > > > > Sell=F2;Buy=F1;Buy=ExRem
(Buy,Sell);Sell=ExRem
> > > > > > (Sell,Buy);
> > > > > > > > > > >
> > > > > > > > > > > > > Short=Sell;Cover=Buy;Short=ExRem
> > > > > > > > (Short,Cover);Cover=ExRem
> > > > > > > > > > >
> > > > > > > > > > > > (Cover,Short);
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Yahoo! Groups Sponsor
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > >
> > >
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=17
> > > > > > > > > > >
> > > > > > > > > > > > 05
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > 632198:HM/A=1564415/R=0/*http:/www.netflix.com/Default?
> > > > > > > > > > >
> > > > > > > > > > > > mqso=60164784&par
> > > > > > > > > > >
> > > > > > > > > > > > > tid=3170658>
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > <http://us.adserver.yahoo.com/l?
> > > > > > > > > > >
> > > > > > > > > > > > M=251812.3170658.4537139.1261774/D=egrou
> > > > > > > > > > >
> > > > > > > > > > > > > pmail/S=:HM/A=1564415/rand=998789952>
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > >
> > > > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > >
> > > > > > > > > > > > > ----------------------------------------
-
> > > > > > > > > > >
> > > > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > > > (Web page:
> > > > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > >
> > > > > > > > > > > > > ----------------------------------------
----
> > > > > > > > > > >
> > > > > > > > > > > > > Check group FAQ at:
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > >
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > > Your use of Yahoo! Groups is subject to
the
> > > Yahoo!
> > > > > > > > > > >
> > > > > > > > > > > > > <http://docs.yahoo.com/info/terms/>
Terms of
> > > > > > Service.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > >
> > > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > >
> > > > > > > > > > > > -----------------------------------------
> > > > > > > > > > >
> > > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > > (Web page:
> > > > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > >
> > > > > > > > > > > > ------------------------------------------
--
> > > > > > > > > > >
> > > > > > > > > > > > Check group FAQ at:
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > >
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > > >
> > > > > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ------------------------ Yahoo! Groups
Sponsor ---
> > > ------
> > > > > > ----
> > > > > > > > ----
> > > > > > > > > > ----~-->
> > > > > > > > > > >
> > > > > > > > > > > Rent DVDs from home.
> > > > > > > > > > >
> > > > > > > > > > > Over 14,500 titles. Free Shipping
> > > > > > > > > > >
> > > > > > > > > > > & No Late Fees. Try Netflix for FREE!
> > > > > > > > > > >
> > > > > > > > > > >
> > > http://us.click.yahoo.com/BVVfoB/hP.FAA/uetFAA/GHeqlB/TM
> > > > > > > > > > >
> > > > > > > > > > > --------------------------------------------
------
> > > ------
> > > > > > ----
> > > > > > > > ----
> > > > > > > > > > -----~->
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > >
> > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > >
> > > > > > > > > > > -----------------------------------------
> > > > > > > > > > >
> > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > >
> > > > > > > > > > > (Web page:
> > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > >
> > > > > > > > > > > --------------------------------------------
> > > > > > > > > > >
> > > > > > > > > > > Check group FAQ at:
> > > > > > > > > >
> > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > > -----------------------------------------
> > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > > (Web page:
> > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > > --------------------------------------------
> > > > > > > > > > > Check group FAQ at:
> > > > > > > > > >
> > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > > Your use of Yahoo! Groups is subject to the
> > > Yahoo!
> > > > > > Terms of
> > > > > > > > > > Service.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > > -----------------------------------------
> > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > > (Web page:
> > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > > --------------------------------------------
> > > > > > > > > > > Check group FAQ at:
> > > > > > > > > >
> > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > > Your use of Yahoo! Groups is subject to the
Yahoo!
> > > Terms
> > > > > > of
> > > > > > > > > > Service.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Yahoo! Groups Sponsor
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > > -----------------------------------------
> > > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > > (Web page:
> > > > > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > > --------------------------------------------
> > > > > > > > > > > Check group FAQ at:
> > > > > > > > > >
> > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > > >
> > > > > > > > > > > Your use of Yahoo! Groups is subject to the
Yahoo!
> > > Terms
> > > > > > of
> > > > > > > > > > Service.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > > -----------------------------------------
> > > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > > (Web page:
> > > http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > > --------------------------------------------
> > > > > > > > > > Check group FAQ at:
> > > > > > > >
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > > >
> > > > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > -----------------------------------------
> > > > > > > > Post AmiQuote-related messages ONLY to:
> > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > (Web page:
http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > --------------------------------------------
> > > > > > > > Check group FAQ at:
> > > > > >
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > >
> > > > > > > > Your use of Yahoo! Groups is subject to
> > > > > > http://docs.yahoo.com/info/terms/
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > -----------------------------------------
> > > > > > Post AmiQuote-related messages ONLY to:
> > > amiquote@xxxxxxxxxxxxxxx
> > > > > > (Web page:
http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > --------------------------------------------
> > > > > > Check group FAQ at:
> > > > http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > > >
> >
> >
> >
> > Send BUG REPORTS to bugs@xxxx
> > Send SUGGESTIONS to suggest@xxxx
> > -----------------------------------------
> > Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
> > (Web page: http://groups.yahoo.com/group/amiquote/messages/)
> > --------------------------------------------
> > Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get A Free Psychic Reading! Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/Lj3uPC/Me7FAA/uetFAA/GHeqlB/TM
---------------------------------------------------------------------~->
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
|