|
PureBytes Links
Trading Reference Links
|
Sunil,
Plot the indicator on a chart and see if it works. Don't see a
problem but will check later.
Preston
--- In equismetastock@xxxxxxxxxxxxxxx, "SUNIL gupta"
<sunilgupta72@xxx> wrote:
>
> Preston,
>
> I ran the explorer but it doesnt show any results.. i also tried
running it
> on a specific date on which buy was triggered but it still didnt
show any
> results...kindly check.
>
> regards,
>
>
>
>
> On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx> wrote:
> >
> > Sunil,
> >
> > What were the results of your test?
> >
> > The Explorer would be taken off of the Sunil Trade Indicator
> >
> > Column A:{Buys}
> > N:= H>=Ref(HHV(H,50),-1);
> > X:= L<=Ref(LLV(L,25),-1);
> > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > Nbar:=Tr AND Alert(Tr=0,2);
> > nbar;
> >
> > Column B:{Sells}
> > N:= H>=Ref(HHV(H,50),-1);
> > X:= L<=Ref(LLV(L,25),-1);
> > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > Ex:=ExtFml("ForumDLL.Latch",X,N,0,0);
> > xbar:=Ex AND Alert(Ex=0,2);
> > xbar;
> >
> > Preston
> >
> > --- In equismetastock@xxxxxxxxxxxxxxx <equismetastock%
40yahoogroups.com>,
> > "SUNIL gupta"
> > <sunilgupta72@> wrote:
> > >
> > > Preston,
> > >
> > > I did back test and seem to like it. Please Help me with making
> > explorer of
> > > buys trigerred on particular day.
> > >
> > > Sunil
> > >
> > >
> > > On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>>
> > wrote:
> > > >
> > > > Sunil,
> > > >
> > > > Sorry to say that I have not.
> > > >
> > > > Preston
> > > >
> > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com><equismetastock%
> > 40yahoogroups.com>,
> > > > "SUNIL gupta"
> > > > <sunilgupta72@> wrote:
> > > > >
> > > > > Preston,
> > > > >
> > > > > i was working on the turtle formula to improve it further. I
> > just
> > > > wanted to
> > > > > know if u have back tested the system at your end and what
did
> > u
> > > > find the
> > > > > success ratio, specially in momentum stocks?
> > > > >
> > > > > sunil
> > > > >
> > > > >
> > > > > On 6/6/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>>
> > > > wrote:
> > > > > >
> > > > > > Separately on the chart...goes on the price plot.
> > > > > >
> > > > > > Preston
> > > > > >
> > > > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com><equismetastock%
> > > > 40yahoogroups.com>,
> > > > > > "SUNIL gupta"
> > > > > > <sunilgupta72@> wrote:
> > > > > > >
> > > > > > > Preston,
> > > > > > >
> > > > > > > Where do i put this formula?..In expert advisor or
> > seperatekly?
> > > > > > >
> > > > > > > Sunil
> > > > > > >
> > > > > > >
> > > > > > > On 6/5/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>>
> > > > > > wrote:
> > > > > > > >
> > > > > > > > Sunil,
> > > > > > > >
> > > > > > > > You have been a good student!
> > > > > > > >
> > > > > > > > Here is a stop to place on the chart:
> > > > > > > >
> > > > > > > > {Sunil Stop}
> > > > > > > > X:=LLV(L,25){exit signal};
> > > > > > > > x;
> > > > > > > >
> > > > > > > > I'll put together a commentary and place it in the
files
> > > > section
> > > > > > > > shortly. It will require that all indicators are in
the
> > > > indicator
> > > > > > > > list and labeled just as they have been in the text.
> > > > > > > >
> > > > > > > > Preston
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com><equismetastock%
> > > > > > 40yahoogroups.com>,
> > > > > > > > "SUNIL gupta"
> > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > >
> > > > > > > > > Dear Preston,
> > > > > > > > >
> > > > > > > > > Outstanding...the thing works perfectly fine. I
> > changed the
> > > > > > file
> > > > > > > > name to
> > > > > > > > > forumdll.Latch and it works. Now just a little
> > improvement
> > > > is
> > > > > > > > needed and
> > > > > > > > > that is supposing after a buy signal is
generated ..is
> > > > there
> > > > > > any
> > > > > > > > way we can
> > > > > > > > > find out what will be stop loss rate for next day.
> > Maybe
> > > > we can
> > > > > > > > draw a
> > > > > > > > > trailing line or maybe it can show in commnetary box
> > that
> > > > stop
> > > > > > for
> > > > > > > > tomorrow
> > > > > > > > > is such and such rate. I understand the rate will
> > change
> > > > with
> > > > > > each
> > > > > > > > passing
> > > > > > > > > day.
> > > > > > > > >
> > > > > > > > > To know the stop loss will help us . Let me explain
> > with
> > > > > > example:-
> > > > > > > > >
> > > > > > > > > Supposing I buy Share of COmpany XYZ at RS 100 after
> > the
> > > > buy
> > > > > > > > signal is
> > > > > > > > > generated. After three months share price touches
300.
> > Now
> > > > next
> > > > > > > > day I want
> > > > > > > > > to put a stop loss order as i think the share price
can
> > > > tank.
> > > > > > So
> > > > > > > > how will i
> > > > > > > > > know what is the 25 days lowest which will be its
stop
> > loss
> > > > > > level.
> > > > > > > > WE can do
> > > > > > > > > two things..either there should be a line like in
> > moving
> > > > > > averages
> > > > > > > > that will
> > > > > > > > > continously tell us about stop loss level or we can
put
> > > > that
> > > > > > value
> > > > > > > > in
> > > > > > > > > commnetary box.
> > > > > > > > >
> > > > > > > > > Let me know what you think. And once again Preston
> > thanks
> > > > for
> > > > > > your
> > > > > > > > immense
> > > > > > > > > help.
> > > > > > > > >
> > > > > > > > > Sunil gupta
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 6/4/07, pumrysh
<no_reply@xxxxxxxxxxxxxxx<no_reply%40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>>
> > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Sunil,
> > > > > > > > > >
> > > > > > > > > > Not a big problem.
> > > > > > > > > >
> > > > > > > > > > One of two problems and there are several ways to
> > fix it.
> > > > > > There
> > > > > > > > were
> > > > > > > > > > two DLL files in the folder, one that Roy had
> > uploaded
> > > > and
> > > > > > one
> > > > > > > > that
> > > > > > > > > > I uploaded. Either you uploaded the wrong one or I
> > wrote
> > > > the
> > > > > > > > > > indicators based on the wrong one.
> > > > > > > > > >
> > > > > > > > > > Here are the two DLL calls:
> > > > > > > > > >
> > > > > > > > > > ExtFml( "Forum.Latch", LE, LX, SE, SX)
> > > > > > > > > > ExtFml( "ForumDLL.Latch", LE, LX, SE, SX)
> > > > > > > > > >
> > > > > > > > > > Notice that the only difference are the
> > > > words "Forum.Latch"
> > > > > > > > > > and "ForumDLL.Latch"
> > > > > > > > > >
> > > > > > > > > > You can either upload the other DLL or change the
> > > > formulas
> > > > > > to:
> > > > > > > > > >
> > > > > > > > > > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > > > > > > > > > Ex:=ExtFml("ForumDLL.Latch",X,N,0,0);
> > > > > > > > > >
> > > > > > > > > > This should fix the problem. If not let me know.
> > > > > > > > > >
> > > > > > > > > > Preston
> > > > > > > > > >
> > > > > > > > > > --- In
equismetastock@xxxxxxxxxxxxxxx<equismetastock%40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > >
> > > > > > > > > > > Preston,
> > > > > > > > > > >
> > > > > > > > > > > I am having problems installing it. It gives
> > message
> > > > This
> > > > > > DLL
> > > > > > > > does
> > > > > > > > > > not Exist
> > > > > > > > > > > in MSX DLL folder (forum.latch)
> > > > > > > > > > >
> > > > > > > > > > > Sunil
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On 6/4/07, pumrysh
> > <no_reply@xxxxxxxxxxxxxxx <no_reply%40yahoogroups.com><no_reply%
40yahoogr
> > oups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > Sunil,
> > > > > > > > > > > >
> > > > > > > > > > > > Outstanding! The fact that it shows in the
> > builder
> > > > means
> > > > > > > > that it
> > > > > > > > > > > > should be working.
> > > > > > > > > > > >
> > > > > > > > > > > > The expert is in the files section under Sunil
> > > > Turtle.
> > > > > > > > > > > >
> > > > > > > > > > > > Let me explain why I chose to use a DLL.
> > Typically in
> > > > > > > > Metastock
> > > > > > > > > > we
> > > > > > > > > > > > are limited in our ability to choose a value
> > based on
> > > > > > > > anything
> > > > > > > > > > other
> > > > > > > > > > > > than a constant. We can assign or select a
value
> > but
> > > > if
> > > > > > the
> > > > > > > > > > value is
> > > > > > > > > > > > to change from one bar to the next we cannot
do
> > > > that. An
> > > > > > > > example
> > > > > > > > > > > > would be a moving average that uses variable
> > lookback
> > > > > > > > periods.
> > > > > > > > > > Say
> > > > > > > > > > > > that instead of a 10 day MA, we instead
wanted a
> > RSI
> > > > (14)
> > > > > > day
> > > > > > > > MA.
> > > > > > > > > > > > Meaning the value of the lookback might be 10
> > today
> > > > > > because
> > > > > > > > the
> > > > > > > > > > RSI
> > > > > > > > > > > > (14) is 10 but tomorrow if the RSI(14) is 20
then
> > > > our MA
> > > > > > > > lookback
> > > > > > > > > > > > would also be 20. This can only be done by
using
> > a
> > > > DLL
> > > > > > or in
> > > > > > > > some
> > > > > > > > > > > > cases with a prev value which is so slow that
our
> > > > > > > > calculations
> > > > > > > > > > would
> > > > > > > > > > > > be extremely slow.
> > > > > > > > > > > >
> > > > > > > > > > > > The expert that I have written will give you a
> > signal
> > > > > > > > indicator
> > > > > > > > > > for
> > > > > > > > > > > > your chart, as well trend, highlight, and
> > buy/sell
> > > > > > symbols
> > > > > > > > for
> > > > > > > > > > the
> > > > > > > > > > > > expert. It uses the forum latch indicator.
Trends
> > (Tr)
> > > > > > give a
> > > > > > > > > > > > constant signal while bar signals(Nbar,Xbar)
> > give a
> > > > > > single
> > > > > > > > event
> > > > > > > > > > > > signal.
> > > > > > > > > > > >
> > > > > > > > > > > > Give this a test run and let me know what you
> > think.
> > > > > > > > > > > >
> > > > > > > > > > > > Preston
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --- In
> > equismetastock@xxxxxxxxxxxxxxx <equismetastock%40yahoogroups.com>
> > <equismetastock%40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com>
> > > > > > > > <equismetastock%
> > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > I have DLL installed and it shows In my
> > indicator
> > > > > > builder
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sunil
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > On 6/2/07, pumrysh
> > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%
40yahoogroups.com><no_reply%40yahoogr
> > oups.com><no_reply%
> > 40yahoogr
> > > > oups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <no_reply%
> > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I'm actually waiting on you. You are
going to
> > > > need to
> > > > > > > > have
> > > > > > > > > > the
> > > > > > > > > > > > DLL
> > > > > > > > > > > > > > uploaded and working.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --- In
> > > > equismetastock@xxxxxxxxxxxxxxx <equismetastock%
40yahoogroups.com><equismetastock%40yahoogroups.com>
> > > > <equismetastock%40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com>
> > > > > > > > <equismetastock%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <equismetastock%
> > > > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > PReston,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Thanks for the help. After reading that
> > manual
> > > > i
> > > > > > think
> > > > > > > > > > after
> > > > > > > > > > > > some
> > > > > > > > > > > > > > practice i
> > > > > > > > > > > > > > > will be able to make quite a lot of
> > formula.
> > > > > > > > > > > > > > > AND how are we moving with the
advisor?...I
> > > > just
> > > > > > cant
> > > > > > > > > > express
> > > > > > > > > > > > in
> > > > > > > > > > > > > > words the
> > > > > > > > > > > > > > > help you have been and knowledge that i
am
> > > > getting
> > > > > > from
> > > > > > > > > > reading
> > > > > > > > > > > > > > various
> > > > > > > > > > > > > > > mails and manuals here.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Thanks
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Sunil
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On 6/2/07, pumrysh
> > > > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%40yahoogroups.com>
<no_reply%
> > 40yahoogroups.com><no_reply%40yahoogr
> > > > oups.com><no_reply%
> > > > 40yahoogr
> > > > > > oups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <no_reply%
> > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > We're getting very close now. Need to
do
> > a
> > > > few
> > > > > > more
> > > > > > > > > > things
> > > > > > > > > > > > though
> > > > > > > > > > > > > > > > before we go any further.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > First, I want you to go to the files
> > section
> > > > and
> > > > > > > > retrieve
> > > > > > > > > > > > several
> > > > > > > > > > > > > > > > things.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > 1. Using Latches in MS doc by Roy
Larsen
> > > > > > > > > > > > > > > > 2. Equis Forum DLL...this will be
inside
> > the
> > > > > > folder
> > > > > > > > and
> > > > > > > > > > is
> > > > > > > > > > > > the one
> > > > > > > > > > > > > > > > that Roy placed there. While you are
> > there
> > > > get
> > > > > > the
> > > > > > > > DLL
> > > > > > > > > > users
> > > > > > > > > > > > > > manual.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Then I want you to study them a bit so
> > that
> > > > you
> > > > > > > > > > understand
> > > > > > > > > > > > how
> > > > > > > > > > > > > > they
> > > > > > > > > > > > > > > > work.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > The Metastock community is truly
> > fortunate to
> > > > > > have a
> > > > > > > > > > gift in
> > > > > > > > > > > > the
> > > > > > > > > > > > > > > > talents of Roy and learning about
> > latches and
> > > > > > dll's
> > > > > > > > will
> > > > > > > > > > > > take you
> > > > > > > > > > > > > > to
> > > > > > > > > > > > > > > > another level of capabilities. Roy
> > invented
> > > > > > latches
> > > > > > > > to
> > > > > > > > > > > > accomplish
> > > > > > > > > > > > > > > > exactly what you are trying to do.
Study
> > > > these
> > > > > > > > documents!
> > > > > > > > > > > > They are
> > > > > > > > > > > > > > > > going to be extremely useful.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I'll have an expert for you in just a
> > day or
> > > > so.
> > > > > > In
> > > > > > > > the
> > > > > > > > > > > > meantime
> > > > > > > > > > > > > > do
> > > > > > > > > > > > > > > > your homework.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > Sunil Gupta
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > [Non-text portions of this message have been
> > > > removed]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sunil Gupta
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > [Non-text portions of this message have been
> > removed]
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sunil Gupta
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [Non-text portions of this message have been
removed]
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Sunil Gupta
> > > > > > >
> > > > > > >
> > > > > > > [Non-text portions of this message have been removed]
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Sunil Gupta
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Sunil Gupta
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
>
>
> --
> Sunil Gupta
>
>
> [Non-text portions of this message have been removed]
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/equismetastock/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/equismetastock/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:equismetastock-digest@xxxxxxxxxxxxxxx
mailto:equismetastock-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
equismetastock-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|