|
PureBytes Links
Trading Reference Links
|
OK, did not realise that would also work in CBT
Live and learn, a continuous process
--
Cheers
Graham Kav
AFL Writing Service
http://www.aflwriting.com
2009/7/7 Mike <sfclimbers@xxxxxxxxx>:
> Graham,
>
> When passing true as the last argument to SetForeign, you actually do get ButPrice and ShortPrice (that's what the doc says anyway). The other arrays are being calculated in place during the CBT. Also, the entryBar variable is calculated for each trade entry, so it is a valid index on a trade by trade basis.
>
> Mike
>
> --- In amibroker@xxxxxxxxxxxxxxx, Graham <kavemanperth@xxx> wrote:
>>
>> Are you sure you are actually getting results for each trade, or the
>> same result for each trade? I would have thought you would be only
>> getting the last values of the backtest period array. You will need to
>> refer to the specific array values for that trade.
>> Variable names like Buyprice and shortprice (or bstopamount) are not
>> passed to CBT from the normal afl code. for buyrpice and shortprice
>> you could use trade.EntryPrice instead, and use other methods to pass
>> the various other variables to the CBT, like using composites,
>> staticvarset etc.
>>
>> --
>> Cheers
>> Graham Kav
>> AFL Writing Service
>> http://www.aflwriting.com
>>
>>
>>
>>
>> 2009/7/7 Mike <sfclimbers@xxx>:
>> > Great, glad to hear that it is now working for you.
>> >
>> > However, you should not have had to use C[entryBar]. It is OK to use it, but you should not have had to. When passing "true" as the last argument to the SetForeign(...) function, BuyPrice should have been converted to be the array of the foreign symbol.
>> >
>> > Mike
>> >
>> > --- In amibroker@xxxxxxxxxxxxxxx, "asitasu" <asitasu@> wrote:
>> >>
>> >> dear mike,
>> >>
>> >> 10000 thank you for clarifing my concept. with your idea with small
>> >> change as follow i got the desired result.
>> >>
>> >> if ( trade.IsLong() )
>> >> {
>> >> SetForeign( trade.Symbol, True, True );
>> >> pw = TimeFrameGetPrice( "l", inWeekly, -1 );
>> >> qw = TimeFrameGetPrice( "l", inWeekly, -2 );
>> >> wqs = Min( pw, qw );
>> >> Buypr = C[entrybar] ;
>> >> bstopamount = Buypr - ( wqs - 1 );
>> >> Buystop = bstopamount[entrybar] ;
>> >> risk = bstopamount[entryBar] * 100;
>> >> RestorePriceArrays(True);
>> >> }
>> >> else
>> >> {
>> >> SetForeign( trade.Symbol, True, True );
>> >> yw = TimeFrameGetPrice( "h", inWeekly, -1 );
>> >> zw = TimeFrameGetPrice( "h", inWeekly, -2 );
>> >> wzs = Max( yw, zw );
>> >> shrtpr = C[entrybar] ;
>> >> sstopamount = ( wzs + 1 ) - shrtpr;
>> >> Shortstop = sstopamount[entrybar] ;
>> >> risk = sstopamount[entryBar] * 100;
>> >> RestorePriceArrays(True);
>> >> }
>> >>
>> >> thank you again.
>> >>
>> >> asit
>> >>
>> >> --- In amibroker@xxxxxxxxxxxxxxx, "Mike" <sfclimbers@> wrote:
>> >> >
>> >> >
>> >> > Hi,
>> >> >
>> >> > I ran the code on symbol AAV from 1/1/07 to 12/31/08 and it generated
>> >> > the extra columns with values. I have not made any attempt to validate
>> >> > the values, but there are definately values being generated. The
>> >> > complete code (taken from what you originally posted) is below. I have
>> >> > not made any attempt to clean it up or get rid of the duplication
>> >> > resulting from copying the calculations in the loop. I am only trying to
>> >> > show the concept:
>> >> >
>> >> > Capital = 100000;
>> >> > SetOption( "InitialEquity", Capital );
>> >> > RoundLotSize = 1;
>> >> > xb = IIf( C > EMA( C, 7 ), 20, 0 );
>> >> > xs = IIf( C < EMA( C, 7 ), -20, 0 );
>> >> > y = TimeFrameGetPrice( "h", inMonthly, -1 );
>> >> > z = TimeFrameGetPrice( "h", inMonthly, -2 );
>> >> > p = TimeFrameGetPrice( "l", inMonthly, -1 );
>> >> > q = TimeFrameGetPrice( "l", inMonthly, -2 );
>> >> > r = TimeFrameGetPrice( "h", inMonthly );
>> >> > s = TimeFrameGetPrice( "l", inMonthly );
>> >> > wz = Max( y, z );
>> >> > zb = IIf( r > wz , 30, 0 );
>> >> > wq = Min( p, q );
>> >> > zs = IIf( s < wq, -30, 0 );
>> >> > yw = TimeFrameGetPrice( "h", inWeekly, -1 );
>> >> > zw = TimeFrameGetPrice( "h", inWeekly, -2 );
>> >> > pw = TimeFrameGetPrice( "l", inWeekly, -1 );
>> >> > qw = TimeFrameGetPrice( "l", inWeekly, -2 );
>> >> > rw = TimeFrameGetPrice( "h", inWeekly );
>> >> > sw = TimeFrameGetPrice( "l", inWeekly );
>> >> > wzs = Max( yw, zw );
>> >> > yb = IIf( rw > wzs , 25, 0 );
>> >> > wqs = Min( pw, qw );
>> >> > ys = IIf( sw < wqs, -25, 0 );
>> >> > score = xb + yb + zb + xs + ys + zs;
>> >> > avrage = MA( V, 30 );
>> >> > diffvol = ( V - avrage ) / avrage;
>> >> > Buy = C > Ref( HHV( H, 2 ), -1 ) AND C > O AND score > 70 ;
>> >> > BuyPrice = C;
>> >> > bstopamount = BuyPrice - ( wqs - 1 );
>> >> > Sell = L < wqs;
>> >> > SellPrice = wqs - 1;
>> >> > ExRem( Buy, Sell );
>> >> > Short = C < Ref( LLV( L, 2 ), -1 ) AND C < O AND score < -70 ;
>> >> > ShortPrice = C ;
>> >> > sstopamount = ( wzs + 1 ) - ShortPrice;
>> >> > Cover = rw > wzs ;
>> >> > CoverPrice = wzs + 1;
>> >> > SetPositionSize( 100, spsShares ) ;
>> >> > ExRem( Short, Cover );
>> >> > /* calling custom backtest*/
>> >> > SetCustomBacktestProc( "" );
>> >> >
>> >> > if ( Status( "action" ) == actionPortfolio )
>> >> > {
>> >> > bo = GetBacktesterObject();
>> >> > bo.backtest( 1 );
>> >> > Sumprofitperrisk = 0;
>> >> > numtrades = 0;
>> >> > bars = BarIndex();
>> >> > dates = DateTime();
>> >> >
>> >> > for ( trade = bo.getfirsttrade(); trade; trade = bo.getnexttrade() )
>> >> > {
>> >> > entryBar = LastValue( ValueWhen( trade.EntryDateTime == dates,
>> >> > bars ) );
>> >> >
>> >> > if ( trade.IsLong() )
>> >> > {
>> >> > SetForeign( trade.Symbol, true, true );
>> >> > pw = TimeFrameGetPrice( "l", inWeekly, -1 );
>> >> > qw = TimeFrameGetPrice( "l", inWeekly, -2 );
>> >> > wqs = Min( pw, qw );
>> >> > bstopamount = BuyPrice - ( wqs - 1 );
>> >> > risk = bstopamount[entryBar] * BuyPrice[entryBar];
>> >> > RestorePriceArrays(true);
>> >> > }
>> >> > else
>> >> > {
>> >> > SetForeign( trade.Symbol, true, true );
>> >> > yw = TimeFrameGetPrice( "h", inWeekly, -1 );
>> >> > zw = TimeFrameGetPrice( "h", inWeekly, -2 );
>> >> > wzs = Max( yw, zw );
>> >> > sstopamount = ( wzs + 1 ) - ShortPrice;
>> >> > risk = sstopamount[entryBar] * ShortPrice[entryBar];
>> >> > RestorePriceArrays(true);
>> >> > }
>> >> >
>> >> > rmultiple = trade.getprofit() / risk;
>> >> >
>> >> > trade.addcustommetric( "initial risk $" , risk );
>> >> > trade.addcustommetric( "R-multiple" , rmultiple );
>> >> > Sumprofitperrisk = Sumprofitperrisk + rmultiple ;
>> >> > numtrades++;
>> >> > }
>> >> >
>> >> > expectancy3 = Sumprofitperrisk / numtrades ;
>> >> >
>> >> > bo.addcustommetric( "Expectancy (per risk)", expectancy3 );
>> >> > bo.listtrades();
>> >> > }
>> >> >
>> >> > Note that it will only provide values for completed trades. Trades that
>> >> > are still open after the backtest will not have any values set.
>> >> >
>> >> > If you are still getting blank columns, try adding custom metrics for
>> >> > all the values used in the calculation to see what they are (e.g.
>> >> > entryBar, pw[entryBar], qw[entryBar], etc.)
>> >> >
>> >> > Mike
>> >> >
>> >> >
>> >> > --- In amibroker@xxxxxxxxxxxxxxx, "asitasu" <asitasu@> wrote:
>> >> > >
>> >> > > dear mike,
>> >> > >
>> >> > > thank you for your help to clarify the matter.
>> >> > > but still i am getting blank colom in bactest report.
>> >> > > i am tring it for single symbol only.
>> >> > > help me.
>> >> > >
>> >> > > asit.
>> >> > >
>> >> > > --- In amibroker@xxxxxxxxxxxxxxx, "Mike" sfclimbers@ wrote:
>> >> > > >
>> >> > > >
>> >> > > > Hi,
>> >> > > >
>> >> > > > There are a few errors with your second example.
>> >> > > >
>> >> > > > The first error is that in your second example "risk" is an array.
>> >> > When
>> >> > > > calling "trade.addcustommetric(...)", you must pass a scaler (i.e. a
>> >> > > > single value) not an array. Notice that in your first example risk
>> >> > was a
>> >> > > > scaler.
>> >> > > >
>> >> > > > The second error is that in your second example "risk" gets
>> >> > recalculated
>> >> > > > for every symbol. So, when referring to "risk" in your custom
>> >> > backtester
>> >> > > > code, which symbol's "risk" are you expecting to get? The active
>> >> > symbol
>> >> > > > during custom backtesting is "~~~Equity", so you will be getting the
>> >> > > > "risk" for ~~~~Equity, which is not what you want. Notice that in
>> >> > your
>> >> > > > first example "risk" was a fixed value.
>> >> > > >
>> >> > > > To solve both problems, you must recalculate risk for each trade
>> >> > using
>> >> > > > the symbol of that trade, and using the values from the entry bar of
>> >> > > > that trade (i.e. calculate using scalers instead of entire array).
>> >> > > >
>> >> > > > Your custom backtester code would then look something like this:
>> >> > > >
>> >> > > > SetCustomBacktestProc( "" );
>> >> > > >
>> >> > > > if ( Status( "action" ) == actionPortfolio )
>> >> > > > {
>> >> > > > bo = GetBacktesterObject();
>> >> > > > bo.backtest( 1 );
>> >> > > > Sumprofitperrisk = 0;
>> >> > > > numtrades = 0;
>> >> > > > bars = BarIndex();
>> >> > > > dates = DateTime();
>> >> > > >
>> >> > > > for ( trade = bo.getfirsttrade(); trade; trade = bo.getnexttrade() )
>> >> > > > {
>> >> > > > entryBar = LastValue( ValueWhen( trade.EntryDateTime == dates,
>> >> > > > bars ) );
>> >> > > >
>> >> > > > if (trade.IsLong()) {
>> >> > > > SetForeign(trade.Symbol, true, true);
>> >> > > > pw = TimeFrameGetPrice( "l", inWeekly, -1 );
>> >> > > > qw = TimeFrameGetPrice( "l", inWeekly, -2 );
>> >> > > > wqs = Min( pw, qw );
>> >> > > > bstopamount = BuyPrice - ( wqs - 1 );
>> >> > > > risk = bstopamount[entryBar] * BuyPrice[entryBar];
>> >> > > > RestorePriceArrays(true);
>> >> > > > } else {
>> >> > > > SetForeign(trade.Symbol, true, true);
>> >> > > > yw = TimeFrameGetPrice( "h", inWeekly, -1 );
>> >> > > > zw = TimeFrameGetPrice( "h", inWeekly, -2 );
>> >> > > > wzs = Max( yw, zw );
>> >> > > > sstopamount = ( wzs + 1 ) - ShortPrice;
>> >> > > > risk = sstopamount[entryBar] * ShortPrice[entryBar];
>> >> > > > RestorePriceArrays(true);
>> >> > > > }
>> >> > > >
>> >> > > > rmultiple = trade.getprofit() / risk;
>> >> > > > trade.addcustommetric( "initial risk $" , risk );
>> >> > > > trade.addcustommetric( "R-multiple" , rmultiple );
>> >> > > > Sumprofitperrisk = Sumprofitperrisk + rmultiple ;
>> >> > > > numtrades++;
>> >> > > > }
>> >> > > >
>> >> > > > expectancy3 = Sumprofitperrisk / numtrades ;
>> >> > > >
>> >> > > > bo.addcustommetric( "Expectancy (per risk)", expectancy3 );
>> >> > > > bo.listtrades();
>> >> > > > }
>> >> > > >
>> >> > > >
>> >> > > > I have not tested the code above, so make sure to test it out before
>> >> > > > accepting it. Also, I have not tried to verify whether or not your
>> >> > > > calculations are valid. I just copied what you already had and moved
>> >> > the
>> >> > > > calculation of "risk" to inside the backtester.
>> >> > > >
>> >> > > > Mike
>> >> > > >
>> >> > > >
>> >> > > > --- In amibroker@xxxxxxxxxxxxxxx, "asitasu" <asitasu@> wrote:
>> >> > > > >
>> >> > > > > dear mike,
>> >> > > > >
>> >> > > > > i understood where you want me to direct. for you reference i am
>> >> > > > giving full afl for my system which works fine giving me two extra
>> >> > > > coloms of initial risk & expectancy/trade coloumwise. but when i try
>> >> > to
>> >> > > > change risk perameter as shown in following afl i get blnak colom of
>> >> > > > initial risk & expectancy/trade. so i wnt to know how to get initial
>> >> > > > risk coloum when using risk = enty - stop value.
>> >> > > > >
>> >> > > > > afl.
>> >> > > > > Capital = 100000;
>> >> > > > > SetOption("InitialEquity", Capital );
>> >> > > > > RoundLotSize = 1;
>> >> > > > > possize = 0.8*Capital;
>> >> > > > > allocationrisk = 0.8; // max capital employed per trade
>> >> > > > > risk = 0.05*Capital; // % max risk per trade
>> >> > > > > /* calling custom backtest*/
>> >> > > > > SetCustomBacktestProc("");
>> >> > > > > if( Status("action") == actionPortfolio )
>> >> > > > > {
>> >> > > > > bo = GetBacktesterObject();
>> >> > > > > bo.backtest(1);
>> >> > > > > Sumprofitperrisk = 0;
>> >> > > > > numtrades = 0;
>> >> > > > > // iterate for closed trades
>> >> > > > > for( trade = bo.getfirsttrade(); trade; trade = bo.getnexttrade()
>> >> > )
>> >> > > > > {
>> >> > > > > rmultiple = trade.getprofit()/risk;
>> >> > > > > trade.addcustommetric("initial risk $" , risk );
>> >> > > > > trade.addcustommetric("R-multiple" , rmultiple );
>> >> > > > > Sumprofitperrisk = Sumprofitperrisk + rmultiple ;
>> >> > > > > numtrades++;
>> >> > > > > }
>> >> > > > > expectancy3 = Sumprofitperrisk / numtrades ;
>> >> > > > > bo.addcustommetric( "Expectancy (per risk)", expectancy3 );
>> >> > > > > bo.listtrades();
>> >> > > > > }
>> >> > > > >
>> >> > > > > xb = IIf(C > EMA(C,7),20,0);
>> >> > > > > xs = IIf(C < EMA(C,7),-20,0);
>> >> > > > > y = TimeFrameGetPrice("h",inMonthly,-1);
>> >> > > > > z = TimeFrameGetPrice("h",inMonthly,-2);
>> >> > > > > p = TimeFrameGetPrice("l",inMonthly,-1);
>> >> > > > > q = TimeFrameGetPrice("l",inMonthly,-2);
>> >> > > > > r = TimeFrameGetPrice("h",inMonthly);
>> >> > > > > s = TimeFrameGetPrice("l",inMonthly);
>> >> > > > > wz = Max(y,z);
>> >> > > > > zb = IIf(r > wz ,30,0);
>> >> > > > > wq = Min(p,q);
>> >> > > > > zs = IIf(s < wq,-30,0);
>> >> > > > > yw = TimeFrameGetPrice("h",inWeekly,-1);
>> >> > > > > zw = TimeFrameGetPrice("h",inWeekly,-2);
>> >> > > > > pw = TimeFrameGetPrice("l",inWeekly,-1);
>> >> > > > > qw = TimeFrameGetPrice("l",inWeekly,-2);
>> >> > > > > rw = TimeFrameGetPrice("h",inWeekly);
>> >> > > > > sw = TimeFrameGetPrice("l",inWeekly);
>> >> > > > > wzs = Max(yw,zw);
>> >> > > > > yb = IIf(rw > wzs ,25,0);
>> >> > > > > wqs = Min(pw,qw);
>> >> > > > > ys = IIf(sw < wqs,-25,0);
>> >> > > > > score = xb+yb+zb+xs+ys+zs;
>> >> > > > > avrage = MA(V,30);
>> >> > > > > diffvol = (V-avrage)/avrage;
>> >> > > > > Buy = C > Ref(HHV(H,2),-1) AND C>O AND score > 70 ;
>> >> > > > > BuyPrice = C;
>> >> > > > > bstopamount = BuyPrice-(wqs - 1);
>> >> > > > > Sell = L < wqs;
>> >> > > > > SellPrice = wqs - 1;
>> >> > > > > ExRem(Buy,Sell);
>> >> > > > > Short = C < Ref(LLV(L,2),-1) AND C<O AND score < -70 ;
>> >> > > > > ShortPrice = C ;
>> >> > > > > sstopamount = (wzs +1) - ShortPrice;
>> >> > > > > Cover = rw > wzs ;
>> >> > > > > CoverPrice = wzs + 1;
>> >> > > > > SetPositionSize( 100, spsShares ) ;
>> >> > > > > ExRem(Short,Cover);
>> >> > > > > //PositionSize =IIf(Buy,
>> >> > > >
>> >> > Min((risk/bstopamount)*BuyPrice,possize),Min((risk/sstopamount)*ShortPri\
>> >> > \
>> >> > > > ce,possize));
>> >> > > > > //PositionScore = PositionSize ; //(V- MA(V,7))/MA(V,7) ; OR
>> >> > > > ma(v,5)/ma(v,20); prefer stocks that High vol thrust;
>> >> > > > > //ApplyStop(0,1,4,1);
>> >> > > > >
>> >> > > > > thisk works fine.
>> >> > > > >
>> >> > > > > but following chane gives blank coloum.
>> >> > > > >
>> >> > > > > Capital = 100000;
>> >> > > > > SetOption("InitialEquity", Capital );
>> >> > > > > RoundLotSize = 1;
>> >> > > > > xb = IIf(C > EMA(C,7),20,0);
>> >> > > > > xs = IIf(C < EMA(C,7),-20,0);
>> >> > > > > y = TimeFrameGetPrice("h",inMonthly,-1);
>> >> > > > > z = TimeFrameGetPrice("h",inMonthly,-2);
>> >> > > > > p = TimeFrameGetPrice("l",inMonthly,-1);
>> >> > > > > q = TimeFrameGetPrice("l",inMonthly,-2);
>> >> > > > > r = TimeFrameGetPrice("h",inMonthly);
>> >> > > > > s = TimeFrameGetPrice("l",inMonthly);
>> >> > > > > wz = Max(y,z);
>> >> > > > > zb = IIf(r > wz ,30,0);
>> >> > > > > wq = Min(p,q);
>> >> > > > > zs = IIf(s < wq,-30,0);
>> >> > > > > yw = TimeFrameGetPrice("h",inWeekly,-1);
>> >> > > > > zw = TimeFrameGetPrice("h",inWeekly,-2);
>> >> > > > > pw = TimeFrameGetPrice("l",inWeekly,-1);
>> >> > > > > qw = TimeFrameGetPrice("l",inWeekly,-2);
>> >> > > > > rw = TimeFrameGetPrice("h",inWeekly);
>> >> > > > > sw = TimeFrameGetPrice("l",inWeekly);
>> >> > > > > wzs = Max(yw,zw);
>> >> > > > > yb = IIf(rw > wzs ,25,0);
>> >> > > > > wqs = Min(pw,qw);
>> >> > > > > ys = IIf(sw < wqs,-25,0);
>> >> > > > > score = xb+yb+zb+xs+ys+zs;
>> >> > > > > avrage = MA(V,30);
>> >> > > > > diffvol = (V-avrage)/avrage;
>> >> > > > > Buy = C > Ref(HHV(H,2),-1) AND C>O AND score > 70 ;
>> >> > > > > BuyPrice = C;
>> >> > > > > bstopamount = BuyPrice-(wqs - 1);
>> >> > > > > Sell = L < wqs;
>> >> > > > > SellPrice = wqs - 1;
>> >> > > > > ExRem(Buy,Sell);
>> >> > > > > Short = C < Ref(LLV(L,2),-1) AND C<O AND score < -70 ;
>> >> > > > > ShortPrice = C ;
>> >> > > > > sstopamount = (wzs +1) - ShortPrice;
>> >> > > > > Cover = rw > wzs ;
>> >> > > > > CoverPrice = wzs + 1;
>> >> > > > > SetPositionSize( 100, spsShares ) ;
>> >> > > > > ExRem(Short,Cover);
>> >> > > > > risk = IIf(Buy, bstopamount*BuyPrice,sstopamount*ShortPrice); //
>> >> > max
>> >> > > > risk per trade
>> >> > > > > /* calling custom backtest*/
>> >> > > > > SetCustomBacktestProc("");
>> >> > > > > if( Status("action") == actionPortfolio )
>> >> > > > > {
>> >> > > > > bo = GetBacktesterObject();
>> >> > > > > bo.backtest(1);
>> >> > > > > Sumprofitperrisk = 0;
>> >> > > > > numtrades = 0;
>> >> > > > > // iterate for closed trades
>> >> > > > > for( trade = bo.getfirsttrade(); trade; trade = bo.getnexttrade()
>> >> > )
>> >> > > > > {
>> >> > > > > rmultiple = trade.getprofit()/risk;
>> >> > > > > trade.addcustommetric("initial risk $" , risk );
>> >> > > > > trade.addcustommetric("R-multiple" , rmultiple );
>> >> > > > > Sumprofitperrisk = Sumprofitperrisk + rmultiple ;
>> >> > > > > numtrades++;
>> >> > > > > }
>> >> > > > > expectancy3 = Sumprofitperrisk / numtrades ;
>> >> > > > > bo.addcustommetric( "Expectancy (per risk)", expectancy3 );
>> >> > > > > bo.listtrades();
>> >> > > > > }
>> >> > > > >
>> >> > > > > can any one help.
>> >> > > > >
>> >> > > > > asit.
>> >> > > > >
>> >> > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Mike" sfclimbers@ wrote:
>> >> > > > > >
>> >> > > > > > See "custom metrics" in the user guide:
>> >> > > > > >
>> >> > > > > > http://www.amibroker.com/guide/a_custommetrics.html
>> >> > > > > >
>> >> > > > > > Mike
>> >> > > > > >
>> >> > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "asitasu" <asitasu@> wrote:
>> >> > > > > > >
>> >> > > > > > > dear frieds,
>> >> > > > > > >
>> >> > > > > > > i want to add extra collume of risk(no % risk) in backtest
>> >> > report
>> >> > > > how to add this by use of afl? i want risk to be calculated on base
>> >> > of
>> >> > > > trade
>> >> > > > > > > entry & stop loss price. say for example i enter at Rs 2515
>> >> > and at
>> >> > > > time of entry my stop loss is Rs 2375.50, than risk per unit is
>> >> > 139.5(ie
>> >> > > > 2515 - 2375.50).
>> >> > > > > > >
>> >> > > > > > > help me.
>> >> > > > > > >
>> >> > > > > > > asit.
>> >> > > > > > >
>> >> > > > > >
>> >> > > > >
>> >> > > >
>> >> > >
>> >> >
>> >>
>> >
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > **** IMPORTANT PLEASE READ ****
>> > This group is for the discussion between users only.
>> > This is *NOT* technical support channel.
>> >
>> > TO GET TECHNICAL SUPPORT send an e-mail directly to
>> > SUPPORT {at} amibroker.com
>> >
>> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
>> > http://www.amibroker.com/feedback/
>> > (submissions sent via other channels won't be considered)
>> >
>> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> > http://www.amibroker.com/devlog/
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>>
>
>
>
>
> ------------------------------------
>
> **** IMPORTANT PLEASE READ ****
> This group is for the discussion between users only.
> This is *NOT* technical support channel.
>
> TO GET TECHNICAL SUPPORT send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> http://www.amibroker.com/feedback/
> (submissions sent via other channels won't be considered)
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
**** IMPORTANT PLEASE READ ****
This group is for the discussion between users only.
This is *NOT* technical support channel.
TO GET TECHNICAL SUPPORT send an e-mail directly to
SUPPORT {at} amibroker.com
TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
http://www.amibroker.com/feedback/
(submissions sent via other channels won't be considered)
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|