|
PureBytes Links
Trading Reference Links
|
Hello,
AB already includes ability to have minute intraday and EOD data
in one database (so called "mixed EOD/intraday mode").
There is a plan to add ability to have all 3 base intervals at once in
single database but there is no date set for that.
Best regards,
Tomasz Janeczko
amibroker.com
----- Original Message -----
From: "sidhartha70" <sidhartha70@xxxxxxxxx>
To: <amibroker@xxxxxxxxxxxxxxx>
Sent: Monday, June 23, 2008 10:09 AM
Subject: [amibroker] Re: [OT] Best Quad-Video card for Vista?
> Thanks Tomasz. I have sent a support enquiry to ATI since my setup
> seems to be correct.
>
> Just going back to my database issue regarding bringing in all the
> data IQ Feed supply... i.e. 10 days tick, 18 months 1 min and 10 years
> EOD.... do you forsee a time in the future when 1 Database in
> AmiBroker might be able to bring in and manaage all that data...?
>
> Many Thanks
>
> --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <groups@xxx> wrote:
>>
>> I don't have ATI cards, but quick Googling found this:
>> http://ati.amd.com/products/catalystcontrolcenter/features.html
>>
>> Also please read this:
>>
>> http://ati.amd.com/products/catalyst/multimonitor_Guide.pdf
>>
>> That's official AMD/ATI instructions how to setup your multiple monitor
>> system. You should be using "Windows horizontal stretch" mode.
>> "Extended more" should be OK too, but make sure that the color depth
>> is the same on both monitors.
>>
>> Best regards,
>> Tomasz Janeczko
>> amibroker.com
>> ----- Original Message -----
>> From: "sidhartha70" <sidhartha70@xxx>
>> To: <amibroker@xxxxxxxxxxxxxxx>
>> Sent: Monday, June 23, 2008 8:50 AM
>> Subject: [amibroker] Re: [OT] Best Quad-Video card for Vista?
>>
>>
>> > Tomsaz,
>> >
>> > Do you know if ATI have an equivalent program to nView...? I'm using
>> > an ATI Radeon X1900 obviously with ATI drivers etc... Maybe it's
>> > something to do with that...?
>> >
>> > Thanks
>> >
>> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <groups@> wrote:
>> >>
>> >> Joseph is right - as I mentioned earlier - watch for any 3rd party
>> > programs
>> >> that affect normal operation of Windows. nView is part of this as it
>> > has an option
>> >> to force windows to open in positions stored internally by nView.
>> >> I always turn nView OFF.
>> >>
>> >> Best regards,
>> >> Tomasz Janeczko
>> >> amibroker.com
>> >> ----- Original Message -----
>> >> From: "J. Biran" <jbiran@>
>> >> To: <amibroker@xxxxxxxxxxxxxxx>
>> >> Sent: Monday, June 23, 2008 1:49 AM
>> >> Subject: RE: [amibroker] Re: [OT] Best Quad-Video card for Vista?
>> >>
>> >>
>> >> > Sometimes this behavior could result from your desktop
>> >> > manager (i.e. nVidia nView) in which I remember vaguely, you
>> >> > can force applications to always open on one screen.
>> >> >
>> >> > Joseph Biran
>> >> > ____________________________________________
>> >> > -----Original Message-----
>> >> > From: amibroker@xxxxxxxxxxxxxxx
>> >> > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of sidhartha70
>> >> > Sent: Sunday, June 22, 2008 2:55 PM
>> >> > To: amibroker@xxxxxxxxxxxxxxx
>> >> > Subject: [amibroker] Re: [OT] Best Quad-Video card for
>> >> > Vista?
>> >> >
>> >> > Tomasz,
>> >> >
>> >> > Sorry I should have been clearer. I isolated the problem I
>> >> > described
>> >> > below having only ONE instance of AB open. I've tried it
>> >> > three times
>> >> > now and I get exactly the same result. Only works if AB is
>> >> > maximised
>> >> > in the left hand screen. So I do think this problem exists.
>> >> > Please try
>> >> > it your end and let me know.
>> >> >
>> >> > Why use two instances of AB...? Mainly because I want to get
>> >> > ALL the
>> >> > following data that IQ Feed provide for the E-Mini's... 10
>> >> > days of
>> >> > tick, 18 months of 1 min bars and daily back 10 years...
>> >> > unfortunately
>> >> > AB won't download all this data... if I set the DB to tick
>> >> > it will not
>> >> > download the 18 months of 1 min bars (which is essential for
>> >> > any kind
>> >> > of backtesting)... however, I prefer to trade live of n-tick
>> >> > bar
>> >> > charts... IF AB did download all that data (ideal world)
>> >> > into on DB
>> >> > then I would need only one instance open....
>> >> >
>> >> >
>> >> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
>> >> > <groups@> wrote:
>> >> >>
>> >> >> Maximize status has nothing to do with that. It is because
>> >> > you are
>> >> > using TWO
>> >> >> instances and use same layout for both.
>> >> >>
>> >> >> If you run TWO instances simultaneously and SAME layout
>> >> > file, you
>> >> > will obviously
>> >> >> overwrite the settings for each other.
>> >> >>
>> >> >> Don't do this.
>> >> >>
>> >> >> You can only run two instances if they DO NOT use same
>> >> > layout at the
>> >> > same time.
>> >> >>
>> >> >> If you want to use two instances you must use only LOCAL
>> >> > layouts
>> >> >> and have two SEPARATE databases.
>> >> >> Each database can be used only with one instance at a
>> >> > time.
>> >> >>
>> >> >> Also why running two instances at all when you can have
>> >> > multiple
>> >> > chart windows ?
>> >> >>
>> >> >> Best regards,
>> >> >> Tomasz Janeczko
>> >> >> amibroker.com
>> >> >> ----- Original Message -----
>> >> >> From: "sidhartha70" <sidhartha70@>
>> >> >> To: <amibroker@xxxxxxxxxxxxxxx>
>> >> >> Sent: Sunday, June 22, 2008 9:28 PM
>> >> >> Subject: [amibroker] Re: [OT] Best Quad-Video card for
>> >> > Vista?
>> >> >>
>> >> >>
>> >> >> > Ok Tomasz,
>> >> >> >
>> >> >> > I seem to have isolated the issue. Perhaps it's a bug I
>> >> > don't know.
>> >> >> >
>> >> >> > If I have AB maximised in my left hand screen and place
>> >> > the floating
>> >> >> > windows in the right hand screen, when I save this
>> >> > layout, yes, it
>> >> >> > loads back perfectly... all the floating windows in the
>> >> > correct
>> >> > positions.
>> >> >> >
>> >> >> > However, if I have AB miximised in the right hand window
>> >> > and place the
>> >> >> > floating windows in the left hand screen, no, saved
>> >> > layouts do not
>> >> >> > reload correctly... the floating window loads back into
>> >> > the right hand
>> >> >> > screen also. Obviously this was the set up I was
>> >> > using... because I
>> >> >> > actually had two instances of AB open. One maximised in
>> >> > each screen.
>> >> >> >
>> >> >> > Any thoughts...?
>> >> >> >
>> >> >> > Thanks
>> >> >> >
>> >> >> >
>> >> >> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
>> >> > <groups@> wrote:
>> >> >> >>
>> >> >> >> Hello,
>> >> >> >>
>> >> >> >> I am running on 32 bit XP and 32 bit Vista. I may check
>> >> > this later
>> >> >> > on 64-bit Vista
>> >> >> >> but it should not make any difference.
>> >> >> >>
>> >> >> >> Just make the following test:
>> >> >> >> 1 Choose Analysis->Formula Editor menu.
>> >> >> >> 2 The Formula Editor will open up.
>> >> >> >> 3 Now move it to 2nd monitor.
>> >> >> >> 4 Close it.
>> >> >> >> 5 Choose Analysis->Formula Editor menu.
>> >> >> >> The editor should open in the correct place on the 2nd
>> >> > monitor
>> >> >> >> exactly in place where you moved it in step 3
>> >> >> >>
>> >> >> >> If it works, the chart windows should use the same as
>> >> > it is exactly
>> >> >> > same code.
>> >> >> >>
>> >> >> >> Best regards,
>> >> >> >> Tomasz Janeczko
>> >> >> >> amibroker.com
>> >> >> >> ----- Original Message -----
>> >> >> >> From: "sidhartha70" <sidhartha70@>
>> >> >> >> To: <amibroker@xxxxxxxxxxxxxxx>
>> >> >> >> Sent: Sunday, June 22, 2008 6:56 PM
>> >> >> >> Subject: [amibroker] Re: [OT] Best Quad-Video card for
>> >> > Vista?
>> >> >> >>
>> >> >> >>
>> >> >> >> > Tomasz,
>> >> >> >> >
>> >> >> >> > I'm running very much a genuine install of 64 Bit
>> >> > Vista.
>> >> >> >> > No extras that I am aware of or can think of...
>> >> >> >> >
>> >> >> >> > Have you tried this on 64 bit Vista over two
>> >> > monitors...?
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
>> >> > <groups@>
>> >> > wrote:
>> >> >> >> >>
>> >> >> >> >> It works PERFECTLY on my end. I can have
>> >> >> >> >> charts on any monitor, or some spanning two monitors
>> >> >> >> >> or anywhere I wish and it is all saved in a a
>> >> > LAYOUT.
>> >> >> >> >>
>> >> >> >> >> If this does not work for you it can only mean that
>> >> >> >> >> your setup is somewhat weird or you are using
>> >> >> >> >> some 3rd party program that affects normal operation
>> >> >> >> >> of Windows operating system.
>> >> >> >> >> (All kinds of "turbo" / "window enhancers" / "window
>> >> > skinning"
>> >> >> >> >> and such tend to cause problems with Windows)
>> >> >> >> >> Make sure you are using CLEAN genuine installation
>> >> > of WIndows
>> >> >> >> >> WITHOUT 3rd party "enhancers".
>> >> >> >> >>
>> >> >> >> >> Best regards,
>> >> >> >> >> Tomasz Janeczko
>> >> >> >> >> amibroker.com
>> >> >> >> >> ----- Original Message -----
>> >> >> >> >> From: "sidhartha70" <sidhartha70@>
>> >> >> >> >> To: <amibroker@xxxxxxxxxxxxxxx>
>> >> >> >> >> Sent: Sunday, June 22, 2008 4:13 PM
>> >> >> >> >> Subject: [amibroker] Re: [OT] Best Quad-Video card
>> >> > for Vista?
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> > Tomasz,
>> >> >> >> >> >
>> >> >> >> >> > I'm runing 5.10.2 and I don't find that floating
>> >> > windows save
>> >> >> > in the
>> >> >> >> >> > correct location when they are taken onto another
>> >> > monitor. I
>> >> >> > find when
>> >> >> >> >> > reloaded they appear again within the confines of
>> >> > AmiBroker
>> >> > itself.
>> >> >> >> >> >
>> >> >> >> >> > Am I doing something wrong...?
>> >> >> >> >> >
>> >> >> >> >> > e.g. AB is maximised on monitor 1... I have a
>> >> > chart visible
>> >> >> > within AB.
>> >> >> >> >> > I create another chart, float it, drag it over to
>> >> > an area of
>> >> >> > monitior
>> >> >> >> >> > 2... save this layout... load another layout, then
>> >> > re-load the
>> >> >> > layout
>> >> >> >> >> > with floating window, and now the floating window
>> >> > is back on
>> >> >> > monitor 1
>> >> >> >> >> > within the AB app....
>> >> >> >> >> >
>> >> >> >> >> > Any ideas...?
>> >> >> >> >> >
>> >> >> >> >> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz
>> >> > Janeczko" <groups@>
>> >> >> > wrote:
>> >> >> >> >> >>
>> >> >> >> >> >> Hello,
>> >> >> >> >> >>
>> >> >> >> >> >> Actually, AmiBroker was multi-monitor aware for
>> >> > years (it
>> >> > stored
>> >> >> >> >> > correctly window positions for all "floating"
>> >> > windows (like
>> >> >> > Automatic
>> >> >> >> >> > Analysis,
>> >> >> >> >> >> RIsk Yield, Review, Formula Editor, all docking
>> >> > panes).
>> >> >> >> >> >> What arrived recently (5.02) is ability to
>> >> > "float" chart
>> >> >> > windows and
>> >> >> >> >> > move them OUTSIDE main window frame, like other
>> >> > floating windows
>> >> >> >> >> > mentioned.
>> >> >> >> >> >> And of course their position is stored correctly
>> >> > in
>> >> > multi-monitor
>> >> >> >> >> > setups.
>> >> >> >> >> >>
>> >> >> >> >> >> As for "application notes for hardware" setup -
>> >> > well
>> >> > AmiBroker is
>> >> >> >> >> > not that demanding. Any PC capable of running
>> >> > Windows (even
>> >> > 95) is
>> >> >> >> >> > able to run AmiBroker.
>> >> >> >> >> >>
>> >> >> >> >> >> For optimum performance, as much RAM as you can
>> >> > have and
>> >> > CPU with
>> >> >> >> >> > fast floating point unit (Intel Core 2 or Athlon
>> >> > family).
>> >> >> >> >> >>
>> >> >> >> >> >> For graphics - it is not that relevant as regular
>> >> > GDI is
>> >> > used for
>> >> >> >> >> > charts and any card will do, but for 3D
>> >> > optimization graphics
>> >> >> > NVidia
>> >> >> >> >> > cards are best performers.
>> >> >> >> >> >>
>> >> >> >> >> >> When you are looking for 4 monitor setup:
>> >> > actually you
>> >> > don't need
>> >> >> >> >> > quad video card.
>> >> >> >> >> >> You can use 2 cards each having 2 DVI outputs
>> >> > (for flat
>> >> > panels).
>> >> >> >> >> > Remember that DVI is superior to analog output as
>> >> > DVI gives
>> >> > maximum
>> >> >> >> >> > sharpness.
>> >> >> >> >> >> If you are using 2 cards, make sure your main
>> >> > board can handle
>> >> >> > 2 PCI
>> >> >> >> >> > EXPRESS (avoid old AGP) graphic cards and make
>> >> > sure the
>> >> > cards are
>> >> >> >> > the same
>> >> >> >> >> >> (the same manufacturer and same model) to avoid
>> >> > driver
>> >> > conflicts.
>> >> >> >> >> > That way single driver installation will handle
>> >> > both cards
>> >> > at once.
>> >> >> >> >> >>
>> >> >> >> >> >> Best regards,
>> >> >> >> >> >> Tomasz Janeczko
>> >> >> >> >> >> amibroker.com
>> >> >> >> >> >> ----- Original Message -----
>> >> >> >> >> >> From: Herman
>> >> >> >> >> >> To: sidhartha70
>> >> >> >> >> >> Sent: Sunday, June 22, 2008 3:22 PM
>> >> >> >> >> >> Subject: Re: [amibroker] Re: [OT] Best
>> >> > Quad-Video card for
>> >> >> > Vista?
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Thanks,
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Some application notes on the optimum hardware
>> >> > setup for
>> >> >> > Amibroker
>> >> >> >> >> > would be useful...perhaps one day... I think many
>> >> > of us are not
>> >> >> >> >> > enjoying full Amibroker performance because its
>> >> > crippled by
>> >> > a bad
>> >> >> >> >> > hardware setup. If you feel you are in this
>> >> > situation you may
>> >> >> > endorse
>> >> >> >> >> > my suggestion at
>> >> >> >> >> >
>> >> > http://www.amibroker.com/feedback/view_bug.php?bug_id=1461
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> I think Tomasz posted recently that TRUE
>> >> > multi-monitor
>> >> > operation
>> >> >> >> >> > is now implemented, including having windows
>> >> > reappear in
>> >> > their last
>> >> >> >> >> > position. However, I can't find the post right
>> >> > now...
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> My main computer setup is for development. For
>> >> > development I may
>> >> >> >> >> > run a dozen different applications and I like to
>> >> > see most of
>> >> >> > them open
>> >> >> >> >> > all the time. A proper development setup more than
>> >> > doubles
>> >> >> >> >> > productivity... and makes it a lot more fun.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> My trading setup is simple, just a laptop with
>> >> > an extra
>> >> > monitor.
>> >> >> >> >> > All I need is there is for Amibroker to place
>> >> > orders
>> >> > (through the
>> >> >> >> >> > IBc), and the TWS to see they get to IB. I need no
>> >> > charts for
>> >> >> > trading.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Best regards,
>> >> >> >> >> >>
>> >> >> >> >> >> Herman
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> For tips on developing Real-Time Auto-Trading
>> >> > systems visit:
>> >> >> >> >> >>
>> >> >> >> >> >> http://www.amibroker.org/userkb/
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Sunday, June 22, 2008, 8:51:27 AM, you wrote:
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > Hi Herman,
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > I'm using a dual monitor set up... and I have
>> >> > an ATI Radeon
>> >> >> >> > X1900.
>> >> >> >> >> >>
>> >> >> >> >> >> > Which seems to work fine for me.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > I can't really comment on quad Video card.
>> >> > Sorry.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > But as an aside I'm fascinated to know how
>> >> > you are using
>> >> >> >> >> > AmiBroker on
>> >> >> >> >> >>
>> >> >> >> >> >> > a multi monitor setup...? Are you using AB
>> >> > maximised in one
>> >> >> >> > screen
>> >> >> >> >> >>
>> >> >> >> >> >> > with floating windows in all the other
>> >> > screens...? Do
>> >> > you find
>> >> >> >> >> > that a
>> >> >> >> >> >>
>> >> >> >> >> >> > bit of a pain, because unless I'm wrong, AB
>> >> > doesn't
>> >> > save the
>> >> >> >> >> > position
>> >> >> >> >> >>
>> >> >> >> >> >> > of floating windows when you save a
>> >> > layout...?
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > Advice appreciated.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > ------------------------------------
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > Please note that this group is for discussion
>> >> > between
>> >> >> > users only.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > To get support from AmiBroker please send an
>> >> > e-mail
>> >> >> > directly to
>> >> >> >> >> >>
>> >> >> >> >> >> > SUPPORT {at} amibroker.com
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > For NEW RELEASE ANNOUNCEMENTS and other news
>> >> > always check
>> >> >> > DEVLOG:
>> >> >> >> >> >>
>> >> >> >> >> >> > http://www.amibroker.com/devlog/
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > For other support material please check also:
>> >> >> >> >> >>
>> >> >> >> >> >> > http://www.amibroker.com/support.html
>> >> >> >> >> >>
>> >> >> >> >> >> > Yahoo! Groups Links
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > http://groups.yahoo.com/group/amibroker/
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > Individual Email | Traditional
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> >
>> >> > http://groups.yahoo.com/group/amibroker/join
>> >> >> >> >> >>
>> >> >> >> >> >> > (Yahoo! ID required)
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > mailto:amibroker-digest@xxxxxxxxxxxxxxx
>> >> >> >> >> >>
>> >> >> >> >> >> >
>> >> > mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > amibroker-unsubscribe@xxxxxxxxxxxxxxx
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > http://docs.yahoo.com/info/terms/
>> >> >> >> >> >>
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > ------------------------------------
>> >> >> >> >> >
>> >> >> >> >> > Please note that this group is for discussion
>> >> > between users
>> >> > only.
>> >> >> >> >> >
>> >> >> >> >> > To get support from AmiBroker please send an
>> >> > e-mail directly to
>> >> >> >> >> > SUPPORT {at} amibroker.com
>> >> >> >> >> >
>> >> >> >> >> > For NEW RELEASE ANNOUNCEMENTS and other news
>> >> > always check
>> >> > DEVLOG:
>> >> >> >> >> > http://www.amibroker.com/devlog/
>> >> >> >> >> >
>> >> >> >> >> > For other support material please check also:
>> >> >> >> >> > http://www.amibroker.com/support.html
>> >> >> >> >> > Yahoo! Groups Links
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > ------------------------------------
>> >> >> >> >
>> >> >> >> > Please note that this group is for discussion between
>> >> > users only.
>> >> >> >> >
>> >> >> >> > To get support from AmiBroker please send an e-mail
>> >> > directly to
>> >> >> >> > SUPPORT {at} amibroker.com
>> >> >> >> >
>> >> >> >> > For NEW RELEASE ANNOUNCEMENTS and other news always
>> >> > check DEVLOG:
>> >> >> >> > http://www.amibroker.com/devlog/
>> >> >> >> >
>> >> >> >> > For other support material please check also:
>> >> >> >> > http://www.amibroker.com/support.html
>> >> >> >> > Yahoo! Groups Links
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > ------------------------------------
>> >> >> >
>> >> >> > Please note that this group is for discussion between
>> >> > users only.
>> >> >> >
>> >> >> > To get support from AmiBroker please send an e-mail
>> >> > directly to
>> >> >> > SUPPORT {at} amibroker.com
>> >> >> >
>> >> >> > For NEW RELEASE ANNOUNCEMENTS and other news always
>> >> > check DEVLOG:
>> >> >> > http://www.amibroker.com/devlog/
>> >> >> >
>> >> >> > For other support material please check also:
>> >> >> > http://www.amibroker.com/support.html
>> >> >> > Yahoo! Groups Links
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> > ------------------------------------
>> >> >
>> >> > Please note that this group is for discussion between users
>> >> > only.
>> >> >
>> >> > To get support from AmiBroker please send an e-mail directly
>> >> > to
>> >> > SUPPORT {at} amibroker.com
>> >> >
>> >> > For NEW RELEASE ANNOUNCEMENTS and other news always check
>> >> > DEVLOG:
>> >> > http://www.amibroker.com/devlog/
>> >> >
>> >> > For other support material please check also:
>> >> > http://www.amibroker.com/support.html
>> >> > Yahoo! Groups Links
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > ------------------------------------
>> >> >
>> >> > Please note that this group is for discussion between users only.
>> >> >
>> >> > To get support from AmiBroker please send an e-mail directly to
>> >> > SUPPORT {at} amibroker.com
>> >> >
>> >> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> >> > http://www.amibroker.com/devlog/
>> >> >
>> >> > For other support material please check also:
>> >> > http://www.amibroker.com/support.html
>> >> > Yahoo! Groups Links
>> >> >
>> >> >
>> >> >
>> >>
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > Please note that this group is for discussion between users only.
>> >
>> > To get support from AmiBroker please send an e-mail directly to
>> > SUPPORT {at} amibroker.com
>> >
>> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
>> > http://www.amibroker.com/devlog/
>> >
>> > For other support material please check also:
>> > http://www.amibroker.com/support.html
>> > Yahoo! Groups Links
>> >
>> >
>> >
>>
>
>
>
> ------------------------------------
>
> Please note that this group is for discussion between users only.
>
> To get support from AmiBroker please send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> For other support material please check also:
> http://www.amibroker.com/support.html
> Yahoo! Groups Links
>
>
>
------------------------------------
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|