[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [amibroker] Re: Something is different. But what ?



PureBytes Links

Trading Reference Links

So what if that's what you did with Excel.  I don't know how Excel "thinks" but it makes no difference because all that you have to worry about is AFL.  I assume that Buy (and consequently inLongPos) is an array that was generated by a function that returns an array (e.g., Cross(), MA(), etc.) in which case no matter what you do you will have to deal with that fact.  If it is not an array why did you use Ref() which operates on arrays?  Forget about what you did in Excel and ask yourself if you did or did not generate Buy with a function that returns an array?  If you conclude that Buy is an array then deal with it as such because nothing else will work, including 
 
Bill 
----- Original Message -----
Sent: Friday, March 28, 2008 11:45 AM
Subject: Re: [amibroker] Re: Something is different. But what ?

Bill that's what I have done in Excel. And Ref(-1) show me the previous cell. So if the
previous cell shows 1.000 then the actual cell should also be 1.000 if there is no Sell. Please look what the statement says :
 
1. If Buy let the actual cell be 1.000
2. If Sell let the actual cell be 0.
3. Otherwise Cell(-1) = Cell(0) ...
 
Regards, Ton.
 
----- Original Message -----
Sent: Friday, March 28, 2008 2:57 PM
Subject: Re: [amibroker] Re: Something is different. But what ?

To understand "why not" take a look at the array discussion in the Users Guide and think about what the inlongpos array looks like at each bar and what ref(..., -1) is looking at.
 
Bill
----- Original Message -----
Sent: Friday, March 28, 2008 5:52 AM
Subject: Re: [amibroker] Re: Something is different. But what ?

Mike/Bill thanks for the answers. Mike I am already using Flip for LongPos and ShortPos. This works fine for me ( LongPos = Flip(Buy,Sell) and ShortPos=Flip(Short,Cover) ). So that's not my problem. My problem is that I still do not see the difference between the two statements I have given and would like to know why there is a difference. Bill in the first statement your should get same result as with the For Loop. So LongPos will become '1000' as soon as we have a Buy and will switch to '0' again with a 'Sell'. Assume T-1 had a Buy then LongPos(T-1) = 1000. Therefore LongPos(T) will be set to '1000' also. But you're right. This is not what is happening. And I still do not understand why not ...
 
Regards, Ton.
 
----- Original Message -----
From: Mike
Sent: Friday, March 28, 2008 12:33 AM
Subject: [amibroker] Re: Something is different. But what ?

Sorry,

That should probably read Flip(ExRem(Buy, Sell), Sell) * 1000;
And maybe not much easier after all ;)

Mike

--- In amibroker@xxxxxxxxxps.com, "Mike" <sfclimbers@...> wrote:
>
> You could probably leverage the Flip function to make this easier
on
> yourself.
>
> e.g.
>
> Buy = ...
> Sell = ...
> InLongPos = Flip(ExRem(Buy, Sell)) * 1000;
>
> Mike
>
> --- In amibroker@xxxxxxxxxps.com, "wavemechanic" <timesarrow@>
> wrote:
> >
> > The iif() does not give the same result because ref(inlongpos, -
1)
> == 0 except when the previous bar is a buy. You can see exactly
what
> is happening graphically with
> >
> > buy =
> > sell =
> > inlongpos = iif(...
> > plot(c, "", iif(buy, colorred, iif(sell, coloryellow,
> colorpalegreen)), stylebar);
> > title = "inlongpos = " + inlongpos + " ref(inlongpos..." + ref
> (inlongpos...) + " buy = " + buy + " sell =" + sell
> >
> > If you want the iif() approach to hold either a buy or sell value
> for each bar additional code is needed to create this condition.
> >
> > Bill
> >
> >
> > ----- Original Message -----
> > From: Ton Sieverding
> > To: amibroker@xxxxxxxxxps.com
> > Sent: Thursday, March 27, 2008 8:10 AM
> > Subject: Re: [amibroker] Something is different. But what ?
> >
> >
> > Sure. This of course if part of an AFL with Buy and Sell
defined.
> Also an init for InLongPos
> > being set to zero as a starter. Again the ForLoop works fine. I
> checked that with following statement : AddColumn
> (InLongPos,"Long",1);
> > My problem is that I do not understand why the first statement
> does not give me the correct answer where the second does ...
> >
> > Regards, Ton.
> >
> > ----- Original Message -----
> > From: wavemechanic
> > To: amibroker@xxxxxxxxxps.com
> > Sent: Thursday, March 27, 2008 12:55 PM
> > Subject: Re: [amibroker] Something is different. But what ?
> >
> >
> >
> > Is there more to the code? Are you getting a
> syntax/initialization error? How are you handling the case when i
==
> 1?
> >
> > Bill
> >
> > ----- Original Message -----
> > From: "amsiev" <ton.sieverding@>
> > To: <amibroker@xxxxxxxxxps.com>
> > Sent: Thursday, March 27, 2008 7:01 AM
> > Subject: [amibroker] Something is different. But what ?
> >
> >
> > > Why is following AFL statement :
> > >
> > > InLongPos = IIf(Buy==1,1000,IIf(Sell==1,0,Ref(InLongPos,-
1)));
> > >
> > > giving me a different result as following ForLoop :
> > >
> > > for ( i=1; i<BarCount; i++ )
> > > {
> > > if (Buy[i]==1)
> > > InLongPos[i] = 1000;
> > > else
> > > {
> > > if (Sell[i]==1)
> > > InLongPos[i] = 0;
> > > else
> > > InLongPos[i] = InLongPos[i-1];
> > > }
> > > }
> > >
> > > The result I am getting from the ForLoop is correct. The
first
> > > statement gives me a wrong answer. I want to get 1000 in
> InLongPos
> > > after Buy and before Sell ... When testing the statement in
> Excel
> > > it works fine with : =IF(A6=1;1000;IF(B6=1;0;C5)) ...
> > >
> > > What's wrong ?
> > >
> > >
> > > ------------------------------------
> > >
> > > Please note that this group is for discussion between users
> only.
> > >
> > > To get support from AmiBroker please send an e-mail
directly
> to
> > > SUPPORT {at} amibroker.com
> > >
> > > For NEW RELEASE ANNOUNCEMENTS and other news always check
> DEVLOG:
> > > http://www.amibroker.com/devlog/
> > >
> > > For other support material please check also:
> > > http://www.amibroker.com/support.html
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG.
> > > Version: 7.5.519 / Virus Database: 269.22.0/1344 - Release
> Date: 3/26/2008 8:52 AM
> > >
> > >
> >
> >
> >
> >
> > ----------------------------------------------------------
--
> ----------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 7.5.519 / Virus Database: 269.22.0/1344 - Release
Date:
> 3/26/2008 8:52 AM
> >
>


No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.0/1344 - Release Date: 3/26/2008 8:52 AM


No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.0/1344 - Release Date: 3/26/2008 8:52 AM
__._,_.___

Please note that this group is for discussion between users only.

To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com

For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/

For other support material please check also:
http://www.amibroker.com/support.html




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___