|
PureBytes Links
Trading Reference Links
|
Anyone can help me?
Yhis should not be complicated for someone who knows AFL more than me.
I am looking for:
variablea = //get the marketID
variableb = //get the industryID
That's about it.
Thanks,
Louis
--- In amibroker@xxxxxxxxxxxxxxx, "Louis Préfontaine" <rockprog80@xxx>
wrote:
>
> Hi,
>
> Hmm... Maybe I am not clear enough, or what I am saying is confusing. I
> will try to explain it another way.
>
> Right now when I choose a stock, I can decide the market, the
industry, and
> the sector. As an example, AA is in the NYSE and I chose the composite
> index indu.x for that market. And YHOO is in the Nasdaq and I chose
> comp.xfor the Nasdaq. I have absolutely no problem getting those
> index and do
> whatever I need I have to do with them. My problem is that I can't
get the
> industry or sector index. Per example, AEM is in NYSE but I want to
compare
> DJI with GLD along with the stock. Right now I can't do it. I can
get the
> base market index, but not the industry index.
>
> I already wrote this code
>
> Ticker = GetBaseIndex(); // plot industry, need to create composite
> sectors
>
> TickerName = IndustryID(1);
>
> TickerClose = Foreign( Ticker, "close" );
>
> for( i = 0; ( symbol = StrExtract( Ticker, i ) ) != ""; i++ )
> {
> fc = Foreign( ticker, "C" );
> }
>
> PlotGrid( 0, colorYellow );
>
> _N( Title = "{{NAME}} - Relative Performance [%]: {{VALUES}}" );
>
> ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -10)) ;
>
> and what I need is a way to get a variable (let's say fc1... or ticker1)
> that would represent the sector/industry index already linked to the
stock.
> So all I need is a way to get to that industry/sector index to be
able to
> assign it to a variable and then use that variable and write, as an
example:
>
> ticker1= ( 100 * ( fc1 - Ref( fc1, -10 ))/Ref (fc1,-10)) ;
>
> I don't understand how to get both the market index and the
sector/industry
> index.
>
> Thank you very much for helping me with this issue. I am still learning
> (got a long way to go) but reading you guys sure helps me.
>
> Louis
>
>
>
>
>
>
>
> 2008/2/13, gmorlosky <gmorlosky@xxx>:
> >
> > Maybe this will help:
> >
> > // AccuTrack Compares performance of two securities
> > // The basic idea is to switch between the two securities
> > // AccuTrack was developed by FastTrack (http://fasttrack.net)
> >
> > // Following is the Indicator Builder Formula
> >
> > fnd = Name();
> > ind = "FDRXX"; // FDRXX is money market fund, so the comparison
> > is done with cash.
> > fund = Foreign(fnd, "Close");
> > index = Foreign(ind, "Close");
> >
> > fast = 6;
> > slow = 24;
> > RawAT = EMA((EMA(ROC(fund,1), slow) - EMA(ROC(index,1),slow)),fast);
> > tradeAccuTrack = RawAT * 265;
> > Plot(tradeAccuTrack, "tradeAccuTrack", colorBlue, styleLine);
> >
> > Title = Date()
> > + " Trade AccuTrack of "
> > + fnd
> > +" / "
> > + ind
> > + " = " + WriteVal(tradeAccuTrack, 1.2) + " ";
> >
> > GraphXSpace = 2;
> >
> > --- In amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>, "Louis
> > Préfontaine"
> > <rockprog80@> wrote:
> > >
> > > Hi,
> > >
> > > I thought about this, but I want something more systemic.. I mean:
> > I want to
> > > build indicators based on that so I don't want to have to change
> > the indexes
> > > manually each time. I would like to have thev base index +
> > industry/sector
> > > index automatically for each stock...
> > >
> > > Sorry if I am not clear enough; english is not my first language.
> > >
> > > Thanks for your help!
> > >
> > > Louis
> > >
> > > 2008/2/13, wavemechanic <timesarrow@>:
> > > >
> > > > *If I understand correctly, how about something along the
> > lines of the
> > > > following for the visible bars using paramstr() (don't think I
> > left anything
> > > > out but modify to do what you want):*
> > > > **
> > > > *status("barvisible"); //all have to have at least as many bars
> > as base or
> > > > reduce time (# bars)*
> > > > *firstvisbar = status("firstvisiblebar");*
> > > > *list = paramstr("list", ^xau, ^gld, nem, ... );*
> > > > *plot(100 * (c - c[firstvisbar])/c[firstvisbar], name(),
> > colorwhite);*
> > > > *for(i = 0, (symbol = strextract(list, i) != "", i++)*
> > > > *{*
> > > > * forsym = foreign(symbol, "C");*
> > > > * if(! isnull(forsym[0]))*
> > > > * {*
> > > > * plot(100 * (forsym - forsym[firstvisbar]) ..... *
> > > > * }*
> > > > *}*
> > > > **
> > > > *Bill*
> > > > **
> > > >
> > > > **
> > > > ----- Original Message -----
> > > >
> > > > **
> > > > *From:* Louis Préfontaine <rockprog80@>
> > > > *To:* amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>
> > > > *Sent:* Wednesday, February 13, 2008 11:44 AM
> > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare industry
> > and
> > > > market ...
> > > >
> > > > Hi,
> > > >
> > > > I am using DTN.
> > > >
> > > > Whatever the other source, that was only an example. I want to
> > compare a
> > > > base index (Dow Jones, Nasdaq, etc.) with a sector/industry index
> > (XAU, GLD,
> > > > etc.) and with the actual stock.
> > > >
> > > > I am already able to compare the stock with the base index
> > > >
> > > > (with the following formla:
> > > >
> > > > Ticker = GetBaseIndex(); // plot industry, need to create
> > composite
> > > > sectors
> > > >
> > > > TickerName = IndustryID(1);
> > > >
> > > > TickerClose = Foreign( Ticker, "close" );
> > > >
> > > > for( i = 0; ( symbol = StrExtract( Ticker, i ) ) != ""; i++ )
> > > > {
> > > > fc = Foreign( ticker, "C" );
> > > > }
> > > >
> > > > PlotGrid( 0, colorYellow );
> > > >
> > > > _N( Title = "{{NAME}} - Relative Performance [%]: {{VALUES}}" );
> > > >
> > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> > > > Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -10)) ;
> > > >
> > > > )
> > > >
> > > > but for some reasons I just don't know how to add a sector index
> > to the
> > > > thing so I can get a third graph...
> > > >
> > > > Louis
> > > >
> > > >
> > > >
> > > > 2008/2/13, dingo <dingo@>:
> > > > >
> > > > > what data source are you using?
> > > > >
> > > > > d
> > > > >
> > > > > ------------------------------
> > > > > *From:* amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>
> > [mailto:amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>] *On
> > > > > Behalf Of *Louis Préfontaine
> > > > > *Sent:* Wednesday, February 13, 2008 11:19 AM
> > > > > *To:* amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>
> > > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
> > industry and
> > > > > market ...
> > > > >
> > > > > Hi,
> > > > >
> > > > > Thanks for your help!
> > > > >
> > > > > I scanned the whole user guide but I think I am missing some
> > insight on
> > > > > this. The guide explains how to use the relativestrength or
> > foreign, but I
> > > > > just didn't see any example how to actually assign a variable
> > for BOTH the
> > > > > marketid and the industry or sector. I have no trouble
> > assigning a variable
> > > > > to the base index, but I just can't use both industry/sector
> > and base index
> > > > > at the same time. That's why I was wondering if anybody knew
> > how to do this
> > > > > and could show me an example of how to do it.
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Louis
> > > > >
> > > > > 2008/2/13, wavemechanic <timesarrow@>:
> > > > > >
> > > > > > *The Users Guide and Library might provide some help. For
> > example:
> > > > > > *
> > > > > > **
> > > > > > *http://www.amibroker.com/guide/afl/afl_view.php?id=123*
> > > > > > **
> > > > > > *http://www.amibroker.com/library/detail.php?id=294*
> > > > > > **
> > > > > > *Bill*
> > > > > > **
> > > > > > **
> > > > > > *----- Original Message ----- * *From: "louisprefontaine" <**
> > > > > > rockprog80@* <rockprog80@>*>*
> > > > > > *To:
<**amibroker@xxxxxxxxxxxxxxx<%2A%2Aamibroker%40yahoogroups.com>*
> >
> > <amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>>*>*
> > > > > > *Sent: Wednesday, February 13, 2008 10:55 AM*
> > > > > > *Subject: [amibroker] Re: Trouble trying to compare industry
> > and
> > > > > > market ...*
> > > > > > *
> > > > > > *
> > > > > > *> Maybe my last message was not clear, so I will try to
> > explain
> > > > > > better.
> > > > > > >
> > > > > > > I know how to use the getbaseindex() to get the base index
> > (DJ, or
> > > > > > > comp, etc.) for each of the stocks, and to apply a formula
> > on that
> > > > > > > index. But what I really want to do is to get BOTH the
> > base index
> > > > > > for
> > > > > > > the stock AND the industry or sector index, as to compare
> > the
> > > > > > > industry/sector index with the base index and with the
> > stock. I am
> > > > > > > looking for 3 informations there to compare one to each
> > other.
> > > > > > >
> > > > > > > If anyone could help me with this issue, maybe by telling
> > me how I
> > > > > > > could write such code to get both index and industry or
> > sector, I
> > > > > > > would greatly appreciate.
> > > > > > >
> > > > > > > I tried to search through all the information in the group
> > in the
> > > > > > last
> > > > > > > years, but found no answer to my question.
> > > > > > >
> > > > > > > Thank you very much!
> > > > > > >
> > > > > > > Louis
> > > > > > >
> > > > > > > --- In
**amibroker@xxxxxxxxxxxxxxx<%2A%2Aamibroker%40yahoogroups.com>*
> >
> > <amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>>
> > > > > > *, "louisprefontaine" <rockprog80@>* *
> > > > > > > wrote:
> > > > > > >>
> > > > > > >> Hi,
> > > > > > >>
> > > > > > >> I am a newbie with Amibroker as well as on this board, but
> > I have
> > > > > > some
> > > > > > >> talent for learning and am trying to learn to write code
> > really
> > > > > > hard.
> > > > > > >> So far, I had no problem that did not have a solution.
> > > > > > >>
> > > > > > >> But now this is something that I don't understand. I want
> > to
> > > > > > compare
> > > > > > >> a market indicator (such as the Dow Jones) and a sector
> > indicator
> > > > > > >> (such as the mining index).
> > > > > > >>
> > > > > > >> Here is the code I wrote so far (I know it's messy; I'm
> > still
> > > > > > learning)
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > > > ----------------------------------------------------------
> > ----------------------------------------------------------
> > --------------------------------------------
> > > > > > >>
> > > > > > >> Ticker = GetBaseIndex(); // plot industry, need to create
> > composite
> > > > > > >> sectors
> > > > > > >>
> > > > > > >> TickerName = IndustryID(1);
> > > > > > >>
> > > > > > >> TickerClose = Foreign( Ticker, "close" );
> > > > > > >>
> > > > > > >>
> > > > > > >> for( i = 0; ( symbol = StrExtract( Ticker, i ) ) != "";
> > i++ )
> > > > > > >> {
> > > > > > >> fc = Foreign( ticker, "C" );
> > > > > > >> }
> > > > > > >>
> > > > > > >> PlotGrid( 0, colorYellow );
> > > > > > >>
> > > > > > >>
> > > > > > >> _N( Title = "{{NAME}} - Relative Performance [%]:
> > {{VALUES}}" );
> > > > > > >>
> > > > > > >> ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> > > > > > >> Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -
> > 10)) ;
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >
> > > > > > ----------------------------------------------------------
> > ----------------------------------------------------------
> > ----------------------------------------------------------
> > ------------------
> > > > > > >>
> > > > > > >> Basically, all I want to do is to add the Industry index
> > along with
> > > > > > >> the Market index which is what is displayed right now.
> > Anybody
> > > > > > would
> > > > > > >> know how to do this? I tried to experiment with
> > getbaseindex and
> > > > > > >> industry() and things like that but I got no way to add
> > both
> > > > > > >> marketid(0) and industryid (0) in the same piece of code.
> > > > > > >>
> > > > > > >> Thanks!!
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > *
> > > > > > *> Please note that this group is for discussion between
> > users only.
> > > > > > >
> > > > > > > To get support from AmiBroker please send an e-mail
> > directly to
> > > > > > > SUPPORT {at} amibroker.com
> > > > > > >
> > > > > > > For NEW RELEASE ANNOUNCEMENTS and other news always check
> > DEVLOG:
> > > > > > >
> > **http://www.amibroker.com/devlog/*<http://www.amibroker.com/devlog/>
> > > > > > *>
> > > > > > > For other support material please check also:
> > > > > > >
> > **http://www.amibroker.com/support.html*<http://www.amibroker.com/supp
> > ort.html>
> > > > > > *>
> > > > > > > Yahoo! Groups Links
> > > > > > >
> > > > > > >
> > > > > > > **mailto:amibroker-
> > fullfeatured@xxxxxxxxxxxxxxx <fullfeatured%40yahoogroups.com>*<
> >
amibroker-fullfeatured@xxxxxxxxxxxxxxx<amibroker-fullfeatured%40yahoogroups.com>
> > >
> > > > > > *>
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > No virus found in this incoming message.
> > > > > > > Checked by AVG Free Edition.
> > > > > > > Version: 7.5.516 / Virus Database: 269.20.4/1275 - Release
> > Date:
> > > > > > 2/12/2008 3:20 PM
> > > > > > >
> > > > > > >*
> > > > > >
> > > > > >
> > > > >
> > > > ------------------------------
> > > >
> > > > No virus found in this incoming message.
> > > > Checked by AVG Free Edition.
> > > > Version: 7.5.516 / Virus Database: 269.20.4/1275 - Release Date:
> > 2/12/2008
> > > > 3:20 PM
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|