|
PureBytes Links
Trading Reference Links
|
Ton,
Strange, but I don't get that either.
When I run the code as an exploration over a single stock, one for
which I have data since 1997 and has been liquid since then, it takes
about 15 seconds and only prompts about overwriting the file once. Are
you sure you're only doing it over a single stock? This is on my
laptop which is a 1.8GHz Centrino.
Also, if I comment out the font setting statements, it only takes
about 6 seconds.
Occasionally I do get an odd thing happening though. After running the
exploration, the currently-displayed chart (the one I just run the
exploration over) disappears and gets replaced in all panes with an
error message to the effect that there was some sort of exception.
However, that only happens occasionally. Most of the time it works okay.
Anyway, whatever the issue is, it looks like it's slow and a bit flaky
for some reason.
Regards,
GP
--- In amibroker@xxxxxxxxxxxxxxx, "Ton Sieverding"
<ton.sieverding@xxx> wrote:
>
> I checked your code. My remark was that AB hangs. Is this correct ?
Answer, not at all. It just takes a very long time to get the result.
Why ? For two good reasons. Firstly the AFL interpreter executes the
code 3 times. You can test this. Once you have a XLS and you want to
run the same item again, you therefore are getting 3 times the
question if you want to overwrite the XLS. Simply because the AFL
interpreter is executing 3 times the same code. Secondly because
writing something to Excel takes a lot of time. Why ? Don't know. I
tested this with DebugView and it took me 74 seconds for 3.752 lines.
The second problem is what it is. But the first problem could be
removed by testing if the XLS already exists. If true, skipping the
rest of the AFL procedure. Unless you have a better solution ...
>
> Regards, Ton.
>
> ----- Original Message -----
> From: gp_sydney
> To: amibroker@xxxxxxxxxxxxxxx
> Sent: Saturday, July 14, 2007 11:13 AM
> Subject: [amibroker] Re: Difficulities in getting COM syntax with
Excel VBA
>
>
> Ton,
>
> I didn't have that problem, but if an error occurs before the workbook
> is closed, the Excel object will still be active and locking the
> output file. The Excel process then needs to be killed in Task
> Manager. However, the locked file would prevent it being opened in
> Excel as well.
>
> Check in the Task Manager process list (ie. under the Processes tab)
> that no instances of Excel are running before running the AFL code. If
> AB still locks up, check the Task Manager process list again and see
> any Excel processes are still running. If so, try killing them.
>
> Otherwise I can only suggest using DebugView and trace statements to
> find out exactly how far it gets, although if you say the XLS file is
> being generated and that you can open it in Excel, then it would seem
> that it is getting right through it.
>
> GP
>
> --- In amibroker@xxxxxxxxxxxxxxx, "Ton Sieverding"
> <ton.sieverding@> wrote:
> >
> > I did a quick test with underneath mentioned code. Although the code
> is creating the requested XLS file and I can read the file in Excel,
> when running the AFL formula in AB the program hangs and I must end
> the AB task with Windows Task Manager. Any idea ?
> >
> > Regards, Ton.
> >
> > ----- Original Message -----
> > From: gp_sydney
> > To: amibroker@xxxxxxxxxxxxxxx
> > Sent: Saturday, July 14, 2007 10:06 AM
> > Subject: [amibroker] Re: Difficulities in getting COM syntax with
> Excel VBA
> >
> >
> > I can fix the date issue by printing it in US format:
> >
> > cell.Value = StrFormat("%1.0f/%1.0f/%1.0f", mm, dd, yy);
> >
> > That then correctly displays in Australian format with Australian
> > regional settings.
> >
> > Still not sure why the "fnt.Bold = True" statement is taking so long
> > though.
> >
> > GP
> >
> > --- In amibroker@xxxxxxxxxxxxxxx, "gp_sydney" <gp.investment@>
wrote:
> > >
> > > Winston,
> > >
> > > When it comes to Microsoft applications and getting syntax right,
> > > you'd better pad up those brick walls or your head is going to get
> > > very sore!
> > >
> > > Here's some code that will write the date and the opening and
> closing
> > > prices to an XLS file. Put it in an exploration and just run it
> over a
> > > single symbol, or it's going to take a very long time.
> > >
> > > This code creates a new workbook and uses the first worksheet.
> It sets
> > > the number format, alignmnent, and width of columns A, B, and C,
> puts
> > > titles in the first row of each of the columns with bold font and
> > > centred text, then fills the other rows with the data.
> > >
> > > Not sure if I've got something wrong here, but I do get a
couple of
> > > odd things happening. Firstly, the statements that set the
font seem
> > > to take an unusally long time, and when I look through the
resulting
> > > file, some of the dates have US date format and some have
> Australian.
> > >
> > > Also, if you don't specify a path for the file, it seems to
> default to
> > > the "My Documents" folder.
> > >
> > > Regards, GP
> > >
> > >
> > > excel = CreateObject("Excel.application");
> > > wb = excel.WorkBooks;
> > > wb.Add;
> > > wb1 = wb.Item(1);
> > > ws = wb1.WorkSheets;
> > > ws1 = ws.Item(1);
> > >
> > > cmn = ws1.Columns("A");
> > > cmn.NumberFormat = "d/mm/yyyy";
> > > cmn.ColumnWidth = 12;
> > > cmn.HorizontalAlignment = 4; // 2=left, 3=centre, 4=right
> > > cmn = ws1.Columns("B");
> > > cmn.NumberFormat = "$0.000";
> > > cmn.ColumnWidth = 10;
> > > cmn.HorizontalAlignment = 4;
> > > cmn = ws1.Columns("C");
> > > cmn.NumberFormat = "$0.000";
> > > cmn.ColumnWidth = 10;
> > > cmn.HorizontalAlignment = 4;
> > >
> > > cell = ws1.Range("A1");
> > > cell.Value = "Date";
> > > fnt = cell.Font;
> > > fnt.Bold = True;
> > > cell.HorizontalAlignment = 3;
> > > cell = ws1.Range("B1");
> > > cell.Value = "Open";
> > > fnt = cell.Font;
> > > fnt.Bold = True;
> > > cell.HorizontalAlignment = 3;
> > > cell = ws1.Range("C1");
> > > cell.Value = "Close";
> > > fnt = cell.Font;
> > > fnt.Bold = True;
> > > cell.HorizontalAlignment = 3;
> > >
> > > dn = DateNum();
> > > for (i = 0; i < BarCount; i++)
> > > {
> > > yy = Int(dn[i] / 10000) + 1900;
> > > mm = Int((dn[i] % 10000) / 100);
> > > dd = dn[i] % 100;
> > > cell = ws1.Range("A"+(i+2));
> > > cell.Value = StrFormat("%1.0f/%1.0f/%1.0f", dd, mm, yy);
> > > cell = ws1.Range("B"+(i+2));
> > > cell.Value = Open[i];
> > > cell = ws1.Range("C"+(i+2));
> > > cell.Value = Close[i];
> > > }
> > > ws1.SaveAs("c:\\Temp\\OpenClose_"+Name()+".xls");
> > > wb.Close;
> > >
> > >
> > >
> > > --- In amibroker@xxxxxxxxxxxxxxx, "peakwk79" <phaser2679@> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I have been trying to implement the COM interface to Excel
for the
> > > > past few days but I simply can't get the syntax right.
> > > >
> > > > For starters, I would like to get the opening and closing
> prices of a
> > > > particular stock on a particular trading day into Excel.
> > > >
> > > > Can someone help?
> > > >
> > > >
> > > > - Winston
> > > >
> > >
> >
>
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|