[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [amibroker] Re: AmiBroker 4.64.0 BETA released



PureBytes Links

Trading Reference Links

Hello TJ,
 
I have a lot of indicators / formulas where Param is not there / not needed. Woudlnt it be better if you could disengage Pane settings from Param and make it independent so that we can use it without having to modify the formula and place a dummy param statement.
 
Regards
 
Prashanth
----- Original Message -----
Sent: Monday, November 22, 2004 2:46 PM
Subject: Re: [amibroker] Re: AmiBroker 4.64.0 BETA released

Hello,

Anyway, if you have a problem just add "Param" function to your formula
and then it should be fine.

Best regards,
Tomasz Janeczko
amibroker.com
----- Original Message -----
From: "Tomasz Janeczko" <amibroker@xxxxxx>
To: <amibroker@xxxxxxxxxxxxxxx>
Sent: Monday, November 22, 2004 10:14 AM
Subject: Re: [amibroker] Re: AmiBroker 4.64.0 BETA released


> Hello,
>
> Please send a sample formula that causes problem for you,
> because I am not able to reproduce the problem,
> AB works just fine in all cases I have tried.
>
> Best regards,
> Tomasz Janeczko
> amibroker.com
> ----- Original Message -----
> From: "mpmafma" <f.manders@xxxxxxx>
> To: <amibroker@xxxxxxxxxxxxxxx>
> Sent: Sunday, November 21, 2004 11:33 PM
> Subject: [amibroker] Re: AmiBroker 4.64.0 BETA released
>
>
>>
>>
>> Tomasz,
>>
>>
>> Sorry but no. I use old indicators stored in newly created
>> directories (under version 4.63). When i right click on the pane the
>> Parameters option is disabled and lightgrey. So I cannot change pane
>> settings.
>>
>> regards,
>>
>> Frans.
>>
>> --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko" <amibroker@xxxx>
>> wrote:
>>> Hello,
>>>
>>> I don't know what you mean. Parameters option is enabled on every
>> chart.
>>>
>>> Best regards,
>>> Tomasz Janeczko
>>> amibroker.com
>>> ----- Original Message -----
>>> From: "mpmafma" <f.manders@xxxx>
>>> To: <amibroker@xxxxxxxxxxxxxxx>
>>> Sent: Sunday, November 21, 2004 10:51 PM
>>> Subject: [amibroker] Re: AmiBroker 4.64.0 BETA released
>>>
>>>
>>> >
>>> >
>>> > Tomasz,
>>> >
>>> >
>>> > You can adjust settings by  using  the parameters option.
>> However in
>>> > a lot of formula's the parameters option is disabled so you
>> cannot
>>> > control settings.
>>> >
>>> > Thanks for the features, enjoying them already.
>>> >
>>> > reagrds,
>>> >
>>> > Frans.
>>> >
>>> > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz Janeczko"
>> <amibroker@xxxx>
>>> > wrote:
>>> >> Hello,
>>> >>
>>> >> A new beta version (4.64.0) of AmiBroker has just been released.
>>> >>
>>> >> It is available for registered users only from the members area
>> at:
>>> >> http://www.amibroker.com/members/bin/ab4640beta.exe
>>> >>
>>> >> (File size: 703 536 bytes, 703 KB)
>>> >>
>>> >> If you forgot your user name / password to the members area
>>> >> you can use automatic reminder service at:
>>> > http://www.amibroker.com/login.html
>>> >>
>>> >> Among other new things:
>>> >> + Indicator Builder replaced by full-screen AFL editor (allows
>> to
>>> > edit multiple files at the same time)
>>> >> + Indicators are now saved in separate AFL files
>>> >> + Formula tree now allows rename/delete/create new file/folder
>>> >> + enancements of drag&drop interface
>>> >> + N-tick bars are supported by TimeFrame functions
>>> >>
>>> >> Please read the Read Me document (below) for detailed list of
>> new
>>> > features and changes.
>>> >>
>>> >> There will be also a series of new video tutorials explaining
>> new
>>> > features published on Monday.
>>> >>
>>> >> Best regards,
>>> >> Tomasz Janeczko
>>> >> amibroker.com
>>> >>
>>> >> AmiBroker 4.64.0 Beta Read Me
>>> >> November 21, 2004 20:07
>>> >>
>>> >> THIS IS A BETA VERSION OF THE SOFTWARE. EXPECT BUGS !!!
>>> >>
>>> >> Backup your data files and entire AmiBroker folder first!
>>> >> IMPORTANT NOTE: This version uses new system to store
>> indicators
>>> > (in separate files), so old versions will not
>> automatically "see"
>>> > indicators created with new version.
>>> >>
>>> >> INSTALLATION INSTRUCTIONS
>>> >>
>>> >> IMPORTANT: This archive is update-only. You have to install
>> full
>>> > version 4.60 first.
>>> >>
>>> >> Just run the installer and follow the instructions.
>>> >>
>>> >> Then run AmiBroker. You should see "AmiBroker 4.64.0 beta"
>> written
>>> > in the About box.
>>> >>
>>> >> Many thanks to all providing detailed descriptions how to
>>> > reproduce given bug.
>>> >>
>>> >>
>>> >> See CHANGE LOG below for detailed list of changes.
>>> >>
>>> >> CHANGE LOG
>>> >>
>>> >> CHANGES FOR VERSION 4.64.0 (as compared to 4.63.1)
>>> >>
>>> >>   a.. QuickAFL is turned ON always
>>> >>   (it does not affect regular AFL code, only may affect some
>> loops
>>> > and/or plugins but a graceful period of almost 2 years was given
>> to
>>> > every user to get used to it and adjust the code if necessary,
>> note:
>>> > if particular formula needs all bars use SetBarsRequired
>> function)
>>> >>   b.. Quick built-in charts is turned ON always
>>> >>   c.. Y-axis drag area is now thinner (to make de-selecting
>> date
>>> > easier)
>>> >>   d.. resizing dialogs remember not only size but also position
>>> >>   e.. time&sales windows remember size and positions separately
>>> > for each symbol
>>> >>   f.. time&sales window now uses TimeShift setting
>> from "Intraday
>>> > Settings" screen
>>> >>   g.. max. trade drawdown stat figure is now also updated at
>> exit
>>> > price of the max. loss stop
>>> >>   h.. on startup all formulas (built-in and custom) that were
>>> > stored in broker.charts / broker.bcharts files are now
>> automatically
>>> > converted to individual AFL files and stored under:
>>> > Formulas\Old\Built-in
>>> >>   and Formulas\Old\Custom
>>> >>   i.. found and fixed few byte memory leak when using #include
>>> >>   j.. #include can now read from registry using @ character
>>> >>   #include @LastBacktestFormula
>>> >>   will include the formula that was used in last backtest run
>>> > (useful for custom equity formulas)
>>> >>   k.. Workspace tab control now sizes down without displaying
>> tab
>>> > scroll bar
>>> >>   l.. all TimeFrame* AFL functions extended to work with N-tick
>>> > bars too. N-tick intervals are specified by NEGATIVE numbers
>> passed
>>> > in 'interval' parameter.
>>> >>   So for example:
>>> >>   TimeFrameSet( -10 ); // switch to 10-tick interval
>>> >>   m.. Workspace -> Charts tree now supports file deletion,
>>> > renaming, creation of new files and folders plus more via Right-
>>> > mouse button (RMMB) menu. Options available from RMB menu:
>>> >>     a.. Insert - creates a copy of the selected file, insert
>>> > _SECTIONS if necessary and inserts charts into new pane
>>> >>     b.. Insert Linked - just inserts chart into new pane - the
>>> > pane links directly to selected formula (so if you have more
>> than
>>> > one pane using the same formula, modifying it will modify the
>> chart
>>> > in all panes linked to it)
>>> >>     c.. Overlay - overlays selected formula onto "active" pane.
>>> > Active pane is the pane you have clicked on recently
>>> >>     d.. Edit - opens Formula Editor and loads selected file for
>>> > editing
>>> >>     e.. Rename - allows to rename formula file
>>> >>     f.. Delete - deletes the formula (permanently !) - charts
>>> > panes linked to it will become black
>>> >>     g.. New->Formula - creates new formula file
>>> >>     h.. New->Folder - creates new folder
>>> >>     i.. Refresh - refreshes directory/file tree
>>> >>   n.. Indicator builder removed and replaced by "Formula
>> Editor"
>>> >>   o.. you can now control axis and grid settings
>> from "Parameters"
>>> > dialog
>>> >>   p.. "Main" chart, "Indicators" and "Other indicators"
>> preference
>>> > pages removed. Now all charts use new drag & drop system
>>> >>
>>> >> CHANGES FOR VERSION 4.63.1 (as compared to 4.63.0)
>>> >>
>>> >>   a.. fixed one more multiple-monitor problem with color popup
>>> > control
>>> >>   b.. Parameters dialog works again in Automatic-Analysis
>> window
>>> >>   c.. new AFL function: ParamTrigger
>>> >>
>>> >>   ParamTrigger( "Name", "Button text")
>>> >>   - to be used in indicator builder - to create triggers
>> (buttons).
>>> >>
>>> >>   If you place ParamTrigger in the indicator code it will
>> create
>>> > a "button" in Parameter dialog that can be pressed.
>>> >>   Normally ParamTrigger will return zero (0) but when button in
>>> > the param window is pressed then it will refresh the chart and
>>> > ParamTrigger will return 1 (one) for this single execution
>> (further
>>> > refreshes will return zero, until the button is pressed again)
>>> >>
>>> >>   Example:
>>> >>
>>> >>   trigger = ParamTrigger("Place Order", "Click here to place
>>> > order");
>>> >>
>>> >>   if( trigger )
>>> >>   {
>>> >>     // your one-shot code here
>>> >>   }
>>> >>
>>> >>   d.. new AFL function: ParamList
>>> >>
>>> >>   ParamList( "Name", "Values", default = 0 )
>>> >>   - generates the parameter that consist of the list of choices
>>> > (specified in "values" parameter - | or comma separated).
>> default
>>> > parameter defines ordinal position of the default string value
>>> > specified in "values" parameter.
>>> >>   Returned value is a STRING representing choosen item.
>>> >>
>>> >>   Example:
>>> >>
>>> >>   OrderType = ParamList("Order Type", "MKT|LMT|STP" );
>>> >>
>>> >> CHANGES FOR VERSION 4.63.0 (as compared to 4.62.1)
>>> >>
>>> >>   a.. 6th parameter for the Param() - sincr - now has correct
>>> > default value of zero.
>>> >>   b.. trading arrows are correctly aligned again - there was a
>>> > problem introduced in 4.62.1 with arrows alignment
>>> >>   c.. fixed redraw problem of layers list
>>> >>   d.. new AFL function added:
>>> >>   GetTradingInterface("Name")
>>> >>   - retrieves OLE automation object to automatic trading
>>> > interface. "Name" is the interface name. You have to have
>> trading
>>> > interface installed separately to make it work otherwise you
>> will
>>> > get the error message attempting to use this function. Trading
>>> > interface for Interactive Brokers will be released separately.
>>> >>   e.. layer list item width is adjusted automatically now when
>>> > sizing the workspace pane
>>> >>   f.. colour-popup is aware of multiple-monitor configurations
>> now
>>> > and opens up on correct monitor.
>>> >>   g.. 'Arrange' works properly now after 'pane maximize'
>>> >>   h.. added warning message when dropping files to AFL formula
>>> > window.
>>> >>   i.. added realtime Time&Sales window (View->Time & Sales, or
>>> > right click over real time quote window)
>>> >>   Standard Edition: only one time & sales window open
>>> >>   Professional Edition: no limits on simultaneously open Time &
>>> > Sales windows
>>> >>   Note that Time & Sales window requires true tick-by-tick
>>> > streaming data source (like eSignal) to operate properly.
>> Certain
>>> > feeds may not provide enough information to allow time&sales
>> window
>>> > operation. eSignal has been tested and it works fine, as for the
>>> > others - there will be 'compatibility guide' published soon.
>>> >>
>>> >>   j.. added automatic marking on "show arrows" flag for old-
>> style
>>> > Price chart
>>> >>   k.. new AFL function (advanced users only)
>>> >>   SetChartOptions( Mode = 0, Flags = 0, gridFlags =
>>> > chartGridMiddle )
>>> >>   allows to set/clear/overwrite/set defaults for chart pane
>>> > options
>>> >>
>>> >>     a.. Mode - specifies how options are set:
>>> >>       a.. 0 - set only the DEFAULT values for new chart.
>> Defaults
>>> > are applied only once when chart is inserted in a new pane, so
>> later
>>> > you can modify any option using Indicator Builder
>>> >>       b.. 1 - overwrite - the values specified in 2nd and 3rd
>>> > argument overwrite any previously set values
>>> >>       c.. 2 - set flag - flags specified in 2nd and 3rd
>> parameter
>>> > are binary-ORed with the current values, so effectively these
>>> > options are set while remaining are unchanged
>>> >>       d.. 3 - reset flag - flags specified in 3nd and 3rd
>>> > parameter are cleared while the others remain unchanged.
>>> >>
>>> >>     b.. Flags - allowable flags are:
>>> >>     chartShowDates, chartLogarithmic, chartShowArrow
>>> >>     c.. gridFlags - (for internal AmiBroker use - do not use it
>> in
>>> > your own coding as this parameter will be eventually removed)
>>> > allowable values are: chartGridDiv100, chartGridPercent,
>>> > chartGridDiv1000, chartGridMargins
>>> >>     chartGridMiddle, chartGrid0, chartGrid30, chartGrid70,
>>> > chartGrid10, chartGrid90,
>>> >>     chartGrid50,chartGrid100,chartGrid20,chartGrid80,chartGrid1
>>> >>
>>> >>     Example:
>>> >>     to mark "Show arrows" by default in a new chart use
>>> >>     SetChartOptions( 0, chartShowArrows );
>>> >>
>>> >> CHANGES FOR VERSION 4.62.1 (as compared to 4.62.0)
>>> >>
>>> >>   a.. new AFL function
>>> >>   ParamStyle("name", default = styleLine, mask = maskDefault ) -
>>
>>> > allows to select the styles applied to plot
>>> >>
>>> >>   b.. new constants:
>>> >>   styleHidden - a combination of styleNoDraw | styleNoRescale
>>> >>   styleDashed - dashed line
>>> >>   to be used with ParamStyle
>>> >>   maskDefault - show thick, dashed, hidden, own scale styles
>> (this
>>> > is default mask for ParamStyle)
>>> >>   maskAll - show all style flags
>>> >>   maskPrice - show thick, hidden, own scale, candle, bar
>>> >>   maskHistogram - show histogram, thick, hidden, own scale, area
>>> >>
>>> >>   c.. colorCycle - accepted only by ParamColor function as
>> default
>>> > value, causes that default color cycles through red, blue,
>> green,
>>> > turquoise, gold, violet, bright green, dark yellow
>>> >>
>>> >>   d.. added new setting in Preferences->Charting "Ask for
>>> > parameters of newly inserted indicators"
>>> >>   (default = TRUE) ensures that AmiBroker displays parameter
>>> > dialog when inserting or dropping new indicators
>>> >>
>>> >>   e.. removed obsolete "max number of custom indicators" setting
>>> >>
>>> >>   f.. Param() function accepts 6 parameters now
>>> >>   Param("name", defvalue, min = 0, max = 100, step = 1, sincr =
>>> > 0 );
>>> >>   (Only for advanced users)
>>> >>   a new parameter sincr is defines the increase of default
>> value
>>> > when more than one section of the same kind is inserted
>> (dropped)
>>> > onto the chart
>>> >>   For example:
>>> >>   Periods = Param("Periods", 15, 2, 200, 1, 10 );
>>> >>   Plot( MA( P, Periods ), _DEFAULT_NAME(), ParamColor( "Color",
>>> > colorCycle ), ParamStyle("Style") );
>>> >>
>>> >>   now when more than one moving average is dropped onto the
>> chart
>>> > then subsequent moving averages default to 15, 25, 35, 45, ...
>> and
>>> > so on (starting value is 15, increase per new section is 10)
>>> >> CHANGES FOR VERSION 4.62.0 (as compared to 4.61.0)
>>> >>
>>> >>   a.. implemented indicator drag and drop mechanism. See video
>>> > tutorial: http://www.amibroker.net/video/dragdrop1.html
>>> >>   b.. new "Chart" tab in the workspace window (lists all AFL
>> files
>>> > and directories from "Formulas" subfolder)
>>> >>   c.. Automatic Analysis formula window is now drag&drop target
>>> > too (you can drag formulas and AFL files onto it)
>>> >>   d.. new AFL special functions used to automatically create
>>> > formulas from code snipplets dragged onto the the indicator pane.
>>> >>   _SECTION_BEGIN, _SECTION_END, _SECTION_NAME, _DEFAULT_NAME,
>>> > _PARAM_VALUES
>>> >>   e.. new styleNoTitle causing that given Plot name and values
>> are
>>> > not included in the title bar of the indicator
>>> >>   f.. new ParamField function allowing to pick price field
>>> >>   g.. new ParamToggle function allowing for boolean (Yes/No)
>>> > parameters
>>> >>   h.. In Tools->Preferences , Keyboard you can how define
>> single
>>> > key shortcut for maximizing and restoring chart pane via View :
>>> > PaneToggle
>>> >>   i.. "Allow mixed EOD/intraday data" switch does not affect N-
>> day
>>> > bars anymore
>>> >>   j.. Parameters are not reset to default values when changing
>> the
>>> > formula- user-edited values are kept
>>> >>   k.. new parameters dialog allowing using sections (for
>> example
>>> > from drag&drop generated code)
>>> >>   l.. parameters dialog displays the items in the order as they
>>> > appear in the formula
>>> >>   m.. fixed Y-axis scale shrinking problem occuring when
>>> > styleOwnScale was used for all plots
>>> >>
>>> >>   n.. Insert->Standard Charts, Insert->Custom Indicators menu
>>> > options removed (now everything is handled by drag & drop) (You
>> can
>>> > still insert old indicators from Indicator Builder dialog though)
>>> >>
>>> >> CHANGES FOR VERSION 4.61.0 (as compared to 4.60.4)
>>> >>
>>> >>   a.. custom time interval support extended to N-day bars.
>>> >>
>>> >>   Now you can define N-day bars in Preferences (Intraday tab)
>> as
>>> > well as you can use N-day bars via TimeFrame functions. For
>> example
>>> >>   TimeFrameSet( 3 * inDaily ); // switch to 3-day time frame
>>> >>
>>> >>   VERY IMPORTANT:
>>> >>   inWeekly constant is now 432001 ( 5*inDaily + 1 ) - in
>> previous
>>> > version it was 432000
>>> >>   inMonthly constant is now 2160001 ( 25*inDaily + 1 ) - in
>>> > previous version it was 2160000
>>> >>
>>> >>   It is changed because now N-day custom intervals are
>> supported
>>> > and they will interfere with weekly/monthly.
>>> >>   Note that 5*inDaily is now DIFFERENT than inWeekly. 5*inDaily
>>> > creates 5-day bars that DO NOT necesarily cover Monday-Friday
>>> >>   while inWeekly ALWAYS creates bars that begin on Monday and
>> end
>>> > on Friday. Also 25*inDaily creates 25-day bars that DO NOT
>>> > necesarily represent full month, while inMonthly always begins
>> with
>>> > first day of the month and ends at the last day of the month
>>> >>
>>> >>   CAVEAT:
>>> >>   if your code uses hard-coded numbers like 432000 for weekly
>> and
>>> > 2160000 for monthly then you MUST change your code to use
>> inWeekly
>>> > constant and inMonthly constant instead.
>>> >>
>>> >>
>>> >>   b.. Study properties dialog has now new checkbox
>>> >>   "Lock position" - when checked study can not be moved or re-
>> sized
>>> >>
>>> >>   c.. ExitAtStop has a new meaning for N-BAR stop type.
>>> >>   If ExitAtStop = 0 then N-bar stop has the lowest priority (so
>> if
>>> > for example profit target stop is hit on the same bar then
>> profit
>>> > target is evaluated first)
>>> >>   If ExitAtStop = 1 then N-bar stop has highest priority and it
>> is
>>> > evaluated before all other stops.
>>> >>   The same effect is obtained by checking "Has priority" box in
>> AA
>>> > Settings window.
>>> >>
>>> >>
>>> >>   d.. new maximizing/restoring chart pane functionality
>> available
>>> > via:
>>> >>   View->Pane->Maximize
>>> >>   View->Pane->Restore
>>> >>   as well as via right click menu.
>>> >>
>>> >>   Remember that you can assign your own keyboard shortcuts for
>>> > that using Tools->Preferences->Keyboard
>>> >>
>>> >>   e.. New drawing tool: Arrow
>>> >>   - draws a line that ends with an arrow
>>> >>
>>> >>   f.. New drawing tool: zig-zag line
>>> >>   draws a series of connected trend lines (Hint: press ESC key
>> to
>>> > finish the series)
>>> >>
>>> >>   g.. new File functions in AFL:
>>> >>
>>> >>     a.. fdelete( "filename" ) - deletes file
>>> >>     "filename" is path to the file name (relative or full path).
>>> >>     If just file name without path is specified then AmiBroker
>>> > directory is used, returns TRUE if file successfully deleted,
>> FALSE
>>> > otherwise
>>> >>
>>> >>     b.. fmkdir( "dirname" ) - creates (makes) a directory
>>> >>     "dirname" specifies path of the directory to be created.
>>> > Please note that this function creates only ONE directory at a
>> time.
>>> >>     So if you want to create nested directory tree you have to
>>> > call it multiple times, for example to create
>>> > C:\MyDirectory\MySubDirectory folder you have to call it twice:
>>> >>
>>> >>     fmkdir( "C:\\MyDirectory" );
>>> >>     fmkdir( "C:\\MyDirectory\\MySubDirectory" );
>>> >>
>>> >>     Note also that it is safe to call it even if directory
>> already
>>> > exists (then no change to file system is applied)
>>> >>     Returns TRUE if directory successfully created, FALSE
>> otherwise
>>> >>
>>> >>     c.. frmdir( "dirname" ) - removes a directory
>>> >>     "dirname" specifies path of the directory to be removed.
>>> > Please note that this function removes only ONE directory at a
>> time.
>>> >>     So if you want to remove nested directory tree you have to
>>> > call it multiple times, for example:
>>> >>
>>> >>     fmkdir( "C:\\MyDirectory\\MySubDirectory" ); // delete
>> nested
>>> > subdir first
>>> >>     fmkdir( "C:\\MyDirectory" );
>>> >>
>>> >>     Note that directory must be empty before removing it
>> otherwise
>>> > it will not be possible to remove it.
>>> >>     Returns TRUE if directory successfully removed, FALSE
>>> > otherwise
>>> >>
>>> >> HOW TO REPORT BUGS
>>> >>
>>> >> If you experience any problem with this beta version please
>> send
>>> > detailed description of the problem (especially the steps needed
>> to
>>> > reproduce it) to bugs at amibroker.com
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > Check AmiBroker web page at:
>>> > http://www.amibroker.com/
>>> >
>>> > Check group FAQ at:
>> http://groups.yahoo.com/group/amibroker/files/groupfaq.html
>>> > Yahoo! Groups Links
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>
>>
>>
>>
>>
>>
>> Check AmiBroker web page at:
>> http://www.amibroker.com/
>>
>> Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>


Check AmiBroker web page at:
http://www.amibroker.com/

Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html





Check AmiBroker web page at:
http://www.amibroker.com/

Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html



Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links