|
PureBytes Links
Trading Reference Links
|
I've shortened all the lines - lets see if Yahoo mangles this.
d
// ***********************************************
//
// An all purpose routine to find the price
// necessary to move an indicator to a GOAL.
//
// This should work for virtually any indicator,
// built in or otherwise. It's demonstrated
// here using RSI & BBand's ...
//
// Note: It will appear to use future quotes
// because of the down shifting of the
// price array, but obviously it can't
// "know" tomorrows price. There's
// probably a way to rectify this but
// I was more concerned with the rest
// of the process.
//
// The maximum iterations have arbitrarily been
// set to 200 which is undoubtedly overkill
// as I've yet to see anything take 200 even
// when tolerance was set to 0 on datastreams
// with very high prices.
//
// For real usage the saving of i in j and the
// accuracy calculation can be tossed as they
// were only put in for demonstration purposes
//
// ***********************************************
//
// This Routine requires the following things
//
// P0 = A price array or synthetic
//
// Goal = The goal value of the indicator
//
// Acc = An accuracy level for the calculations
//
// Set this to the order of magnitude
// that you want. For example if you want
// accuracy in calculated price to within
// 0.01 then set it 0.01. It can even
// be set to 0 which will force AB to
// calculate until it can't find any
// further improvements (Usually between
// 150-170 iterations) but this is semi
// useless as improvements relative to
// price granularity have long since
// been gone by.
//
// The lower you set it the longer it
// will take but it's pretty quick
// (Usually between 15-30 iterations)
// unless you set it at 0.
//
// ***********************************************
//
//Note: Some goals are virtually unattainable on
// the next bar, especially on the downside
// as they would require a negative price
// which is what this routine will show if
// that is what is required.
//
// ***********************************************
P0 = C;
Acc = 0.0001;
LVBI = LastValue(BarIndex());
Mult = 1;
// ***********************************************
// Shift Price up by n orders of magnitude to make
// it >= 1. This is useful to increase
// accuracy on very low priced datastreams
// such as the JY.
// ***********************************************
for (i = 0; i < 10; i++)
{
if (P0[LVBI] >= 1)
i = 99;
else
Mult = Mult * 10;
}
// ***********************************************
P1 = Ref(P0, 1) * Mult;
UpDn = 100 * P1[LVBI];
for (i = 0; i < 200; i++)
{
// An example for finding price associated with
// the next bars BBandTop
//
// ***********************************************
// Put whatever indicator you want to goal seek
// here based on P1
// ***********************************************
Calc = P1;
// ***********************************************
// Put whatever you want for the goal here ...
//
// The reason for putting it in the loop is because
// sometimes the goal is price oriented and will
// need to be recalculated on each iteration.
// ***********************************************
Goal = LastValue(BBandBot(P1, 14, 2));
// ***********************************************
// An example for finding price associated with
// the next bars RSI value of 65
//
// ***********************************************
// Put whatever indicator you want to goal seek
// here based on P1
// ***********************************************
// Calc = RSIa(P1, 14);
// ***********************************************
// Put whatever you want for the goal here ...
// ***********************************************
// Goal = 65;
// ***********************************************
//
// The reason for putting it in the loop is because
// sometimes the goal is price oriented and will
// need to be recalculated on each iteration.
if (Calc[LVBI] < Goal)
P1[LVBI] = P1[LVBI] + UpDn;
else
P1[LVBI] = P1[LVBI] - UpDn;
UpDn = UpDn / 2;
if (UpDn <= Acc)
{
j = i;
i = 99999;
}
}
Accuracy = 100 * (abs(Goal - Calc) / Goal);
Filter = BarIndex() == LVBI;
AddColumn(Mult, "Multiplier", 1.0);
AddColumn(Calc[LVBI - 1] / Mult, "Curr Ind Val", 1.9);
AddColumn(Goal / Mult, "Goal Ind Val", 1.9);
AddColumn(Calc[LVBI] / Mult, "Calc Ind Val", 1.9);
AddColumn(j, "Iterations", 1.0);
AddColumn(Accuracy, "Accuray (%)", 1.9);
AddColumn(Ref(P1, -1) / Mult, "Todays Price", 1.9);
AddColumn(P1 / Mult, "Goal Price", 1.9);
________________________________
From: Mr Valley [mailto:valleymj@xxxxxxxxxxx]
Sent: Saturday, January 31, 2004 2:50 PM
To: amibroker@xxxxxxxxxxxxxxx
Subject: RE: [AmiBroker] Re: Search Routine for Crossover Point -- EMA
Version
Isn't it /* that kills the line because the other end doesn't say */
Try This ...
Mr. Valley
/*Search routine to Find a Crossover Point */
////////////////////////////////////////////////////////////////////////////
////////////////
// An all purpose routine to find the price
// necessary to move an indicator to a GOAL.
//
// This should work for virtually any indicator,
// built in or otherwise. It's demonstrated
// here using RSI & BBand's ...
//
// Note: It will appear to use future quotes
// because of the down shifting of the
// price array, but obviously it can't
// "know" tomorrows price. There's
// probably a way to rectify this but
// I was more concerned with the rest
// of the process.
//
// The maximum iterations have arbitrarily been
// set to 200 which is undoubtedly overkill
// as I've yet to see anything take 200 even
// when tolerance was set to 0 on datastreams
// with very high prices.
//
// For real usage the saving of i in j and the
// accuracy calculation can be tossed as they
// were only put in for demonstration purposes
//
// ***********************************************
//
// This Routine requires the following things
//
// P0 = A price array or synthetic
//
// Goal = The goal value of the indicator
//
// Acc = An accuracy level for the calculations
//
// Set this to the order of magnitude
// that you want. For example if you want
// accuracy in calculated price to within
// 0.01 then set it 0.01. It can even
// be set to 0 which will force AB to
// calculate until it can't find any
// further improvements (Usually between
// 150-170 iterations) but this is semi
// useless as improvements relative to
// price granularity have long since
// been gone by.
//
// The lower you set it the longer it
// will take but it's pretty quick
// (Usually between 15-30 iterations)
// unless you set it at 0.
//
// ***********************************************
//
// Note: Some goals are virtually unattainable on
// the next bar, especially on the downside
// as they would require a negative price
// which is what this routine will show if
// that is what is required.
//
// ***********************************************
P0 = C;
Acc = 0.0001;
LVBI = LastValue(BarIndex());
Mult = 1;
// ***********************************************
// Shift Price up by n orders of magnitude to make
// it >= 1. This is useful to increase
// accuracy on very low priced datastreams
// such as the JY.
// ***********************************************
for (i = 0; i < 10; i++)
{
if (P0[LVBI] >= 1)
i = 99;
else
Mult = Mult * 10;
}
////////////////////////////////////////////////////////////////////////////
//////////////
P1 = Ref(P0, 1) * Mult;
UpDn = 100 * P1[LVBI];
for (i = 0; i < 200; i++)
{
// An example for finding price associated with the next bars BBandTop
//
////////////////////////////////////////////////////////////////////////////
//////////////
// Put whatever indicator you want to goal seek here based on P1
////////////////////////////////////////////////////////////////////////////
//////////////
Calc = P1;
////////////////////////////////////////////////////////////////////////////
//////////////
// Put whatever you want for the goal here ...
//
// The reason for putting it in the loop is because sometimes the goal is
price
// oriented and will need to be recalculated on each iteration.
////////////////////////////////////////////////////////////////////////////
//////////////
Goal = LastValue(BBandBot(P1, 14, 2));
////////////////////////////////////////////////////////////////////////////
//////////////
// An example for finding price associated with the next bars RSI value of
65
//
////////////////////////////////////////////////////////////////////////////
//////////////
// Put whatever indicator you want to goal seek here based on P1
////////////////////////////////////////////////////////////////////////////
//////////////
// Calc = RSIa(P1, 14);
////////////////////////////////////////////////////////////////////////////
//////////////
// Put whatever you want for the goal here ...
//
// The reason for putting it in the loop is because sometimes the goal is
price
// oriented and will need to be recalculated on each iteration.
////////////////////////////////////////////////////////////////////////////
//////////////
// Goal = 65;
////////////////////////////////////////////////////////////////////////////
//////////////
/* */
if (Calc[LVBI] < Goal)
P1[LVBI] = P1[LVBI] + UpDn;
else
P1[LVBI] = P1[LVBI] - UpDn;
UpDn = UpDn / 2;
if (UpDn <= Acc)
{
j = i;
i = 99999;
}
}
Accuracy = 100 * (abs(Goal - Calc) / Goal);
Filter = BarIndex() == LVBI;
AddColumn(Mult, "Multiplier", 1.0);
AddColumn(Calc[LVBI - 1] / Mult,"Curr Ind Val", 1.9);
AddColumn(Goal / Mult, "Goal Ind Val", 1.9);
AddColumn(Calc[LVBI] / Mult,"Calc Ind Val", 1.9);
AddColumn(j, "Iterations", 1.0);
AddColumn(Accuracy, "Accuray (%)", 1.9);
AddColumn(Ref(P1, -1) / Mult, "Todays Price", 1.9);
AddColumn(P1 / Mult, "Goal Price", 1.9);
-----Original Message-----
From: dingo [mailto:dingo@xxxxxxxxxxxx]
Sent: Saturday, January 31, 2004 12:38 PM
To: amibroker@xxxxxxxxxxxxxxx
Subject: RE: [amibroker] Re: Search Routine for Crossover Point --
EMA Version
Ron - the code has been mangled by Yahoo.
That's what's causing your problems if you just copied and pasted it
without trying to straigthen out the line wraps.
Its not an easy thing to do since Fred used such long "*' lines.
d
________________________________
From: Ron Morton [mailto:mortonr003@xxxxxxxxxxxxx]
Sent: Saturday, January 31, 2004 2:07 PM
To: amibroker@xxxxxxxxxxxxxxx
Subject: Re: [amibroker] Re: Search Routine for Crossover Point --
EMA Version
All I did was copy the code from the messages here and put it into
amibroker. No changes were made to the code, as soon as I hit apply I would
get the syntax error message. I highlighted in red on the code on this page
where there errors occurred.
ron
----- Original Message -----
From: Jayson <mailto:jcasavant@xxxxxxxxxxx>
To: amibroker@xxxxxxxxxxxxxxx
Sent: Saturday, January 31, 2004 8:52 AM
Subject: RE: [amibroker] Re: Search Routine for Crossover
Point -- EMA Version
Impossible to say with out seeing the code..... sounds like
you are calling calc and goal prior to defining them..
Regards,
Jayson
-----Original Message-----
From: Ron Morton [mailto:mortonr003@xxxxxxxxxxxxx]
Sent: Saturday, January 31, 2004 1:41 PM
To: amibroker@xxxxxxxxxxxxxxx
Subject: Re: [amibroker] Re: Search Routine for Crossover
Point -- EMA Version
I tried running the code here as it looks like something
that I've been searching for for a while. When I tried to run it I keep
getting syntax error 23 whenever the words calc or goal come up. Could
someone explain to me how to go about fixing this? The specific areas where
this occurs are Calc=P1; and Goal = LastValue(BBandBot(P1, 14, 2));
Thank you,
Ron
----- Original Message -----
From: dingo <mailto:dingo@xxxxxxxxxxxx>
To: amibroker@xxxxxxxxxxxxxxx
Sent: Saturday, January 31, 2004 5:41 AM
Subject: RE: [amibroker] Re: Search Routine for
Crossover Point -- EMA Version
Take a closer look at what Fred did. He shifted the
array back by 1 bar so that it would plot into the future by one bar. It
just doesn't use the space that is non-addressable in the chart area. Its
the only solution right now and it can be adapted to what you want by
shifting the array by as many bars as you need.
d
________________________________
From: pcwinch [mailto:pcwinch@xxxxxxxxxxxxxxx]
Sent: Saturday, January 31, 2004 9:51 AM
To: amibroker@xxxxxxxxxxxxxxx
Subject: Re: [amibroker] Re: Search Routine for
Crossover Point -- EMA Version
Gentlemen,
This is starting to get interesting especially of
someone can figure out how we can extend this into the whitespace area
beyond the latest data.
For example, use your favourite indicator(s) and
apply projected regression channel to the prices.
Qu: A.what happens to your indicator when prices are
at the mid and extremes of the next bar..and the next bar, then
B. use the formula below to see what happens when
the indicator is 1. extrapolated , 2. the same or 3. (2*same - extrapolated)
What would be interesting is what happens to all the
indicators and the prices in the channel when this is applied to one
indicator, and how the indicators look in different time frames. What does
it mean to the setting of stops and exits philosophy is also an interesting
outcome.
Any comments?
Peter
----- Original Message -----
From: Fred <mailto:ftonetti@xxxxxxxxxxxxx>
To: amibroker@xxxxxxxxxxxxxxx
Sent: Saturday, January 31, 2004 3:41 AM
Subject: [amibroker] Re: Search Routine for
Crossover Point -- EMA Version
Is there any reason to limit this to an xMA
when this can easily be
done for any built in AB indicator or any
custom AFL "indicator" that
one cares to write ?
//
***********************************************
//
// An all purpose routine to find the
price
// necessary to move an indicator
to a GOAL.
//
// This should work for virtually any
indicator,
// built in or otherwise. It's
demonstrated
// here using RSI & BBand's ...
//
// Note: It will appear to use
future quotes
// because of the
down shifting of the
// price array, but
obviously it can't
// "know" tomorrows
price. There's
// probably a way to
rectify this but
// I was more
concerned with the rest
// of the process.
//
// The maximum iterations have
arbitrarily been
// set to 200 which is
undoubtedly overkill
// as I've yet to see anything
take 200 even
// when tolerance was set to 0 on
datastreams
// with very high prices.
//
// For real usage the saving of i in j
and the
// accuracy calculation can be
tossed as they
// were only put in for
demonstration purposes
//
//
***********************************************
//
// This Routine requires the following
things
//
// P0 = A price array or
synthetic
//
// Goal = The goal value of the
indicator
//
// Acc = An accuracy level
for the calculations
//
// Set this to the order
of magnitude
// that you want. For
example if you want
// accuracy in calculated
price to within
// 0.01 then set it 0.01.
It can even
// be set to 0 which will
force AB to
// calculate until it
can't find any
// further improvements
(Usually between
// 150-170 iterations)
but this is semi
// useless as
improvements relative to
// price granularity have
long since
// been gone by.
//
// The lower you set it
the longer it
// will take but it's
pretty quick
// (Usually between 15-30
iterations)
// unless you set it at
0.
//
//
***********************************************
//
// Note: Some goals are virtually
unattainable on
// the next bar, especially
on the downside
// as they would require a
negative price
// which is what this
routine will show if
// that is what is
required.
//
//
***********************************************
P0 = C;
Acc = 0.0001;
LVBI = LastValue(BarIndex());
Mult = 1;
//
***********************************************
// Shift Price up by n orders of
magnitude to make
// it >= 1. This is useful to
increase
// accuracy on very low priced
datastreams
// such as the JY.
//
***********************************************
for (i = 0; i < 10; i++)
{
if (P0[LVBI] >= 1)
i = 99;
else
Mult = Mult * 10;
}
//
***********************************************
P1 = Ref(P0, 1) * Mult;
UpDn = 100 * P1[LVBI];
for (i = 0; i < 200; i++)
{
// An example for finding price
associated with the next bars
BBandTop
//
//
**************************************************************
***************
// Put whatever indicator you want to
goal seek here based on P1
//
**************************************************************
***************
Calc = P1; Syntax error here
//
**************************************************************
***************
// Put whatever you want for the goal
here ...
//
// The reason for putting it in the
loop is because sometimes
the goal is price
// oriented and will need to be
recalculated on each
iteration.
//
**************************************************************
***************
Goal = LastValue(BBandBot(P1, 14, 2));
//
**************************************************************
***************
// An example for finding price
associated with the next bars
RSI value of 65
//
//
**************************************************************
***************
// Put whatever indicator you want to
goal seek here based on P1
//
**************************************************************
***************
// Calc = RSIa(P1, 14); Syntax error
here
//
**************************************************************
***************
// Put whatever you want for the goal
here ...
//
// The reason for putting it in the
loop is because sometimes
the goal is price
// oriented and will need to be
recalculated on each
iteration.
//
**************************************************************
***************
// Goal = 65;
//
**************************************************************
***************
if (Calc[LVBI] < Goal)
P1[LVBI] = P1[LVBI] + UpDn;
else
P1[LVBI] = P1[LVBI] - UpDn;
UpDn = UpDn / 2;
if (UpDn <= Acc)
{
j = i;
i = 99999;
}
}
Accuracy = 100 * (abs(Goal - Calc) / Goal);
Filter = BarIndex() == LVBI;
AddColumn(Mult,
"Multiplier", 1.0);
AddColumn(Calc[LVBI - 1] / Mult, "Curr
Ind Val", 1.9);
AddColumn(Goal / Mult,
"Goal Ind Val", 1.9);
AddColumn(Calc[LVBI] / Mult,
"Calc Ind Val", 1.9);
AddColumn(j,
"Iterations", 1.0);
AddColumn(Accuracy,
"Accuray (%)", 1.9);
AddColumn(Ref(P1, -1) / Mult,
"Todays Price", 1.9);
AddColumn(P1 / Mult,
"Goal
Price", 1.9);
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
(Web page:
http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go
to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send
an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject
to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
(Web page:
http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an
email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
(Web page:
http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an
email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at:
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
Yahoo! Groups Sponsor
ADVERTISEMENT
click here
<http://rd.yahoo.com/SIG=12c4a7l1n/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705632198:HM/EXP=1075665006/A=1945637/R=0/*http://www.netflix.com/Def
ault?mqso=60178397&partid=4116732>
<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1945637/rand=716664957>
________________________________
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
* To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/GHeqlB/TM
---------------------------------------------------------------------~->
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|