|
PureBytes Links
Trading Reference Links
|
Thanks Philippe,
That solved the problem for the CAC.
/Stefan
-----Ursprungligt meddelande-----
Från: philippe Desbordes [mailto:phdesbordes@xxxxxxx]
Skickat: den 23 februari 2005 10:00
Till: omega-list@xxxxxxxxxx
Ämne: RE: Help. Charts constantly re-setting problem - Marc
Hi Peter
I just read about your problem.
I had the same at the beginning with ts200i and the Cac (signal datafeed).
Just change the exchange from Matif to Eurex will most probably fix this
problem as it did for me.
Best regards
Philippe
-----Message d'origine-----
De : peter [mailto:peter@xxxxxxxxxxxx]
Envoyé : mercredi 23 février 2005 03:07
À : omega-list@xxxxxxxxxx
Objet : RE: Help. Charts constantly re-setting problem - Marc
Marc,
It's a Dell workstation with a P4,1 Gig of RAM and a couple of 40 Gig
hardrives both of which are more than 50% empty.
Peter
PS Looked at "Task Manager" and right now (with just 1 chart up and
market pretty dead) CPU usage is at about 2% until a tick of new data
comes in at which point it goes to 30% or more for a fraction of a
second.
-----Original Message-----
From: marc miller [mailto:marcmiller@xxxxxxxxx]
Sent: Tuesday, February 22, 2005 8:11 PM
To: peter
Subject: Re: Help. Charts constantly re-setting problem - walter
Peter,
What hardware are you running?
Marc
----- Original Message -----
From: "peter" <peter@xxxxxxxxxxxx>
To: <omega-list@xxxxxxxxxx>
Sent: Tuesday, February 22, 2005 3:15 PM
Subject: RE: Help. Charts constantly re-setting problem - walter
>
> Thanks for the idea.
>
> It doesn't seem to be that...........
>
>
>
>
>
> -----Original Message-----
> From: Walter Hooker [mailto:whooker@xxxxxxxxxxxxxx]
> Sent: Tuesday, February 22, 2005 12:53 PM
> To: omega-list@xxxxxxxxxx
> Subject: Re: Help. Charts constantly re-setting problem
>
> Seems this happen to me once. I discovered by accident I had some how
> got the date in my computer a day off from the data feed to TS. It
> caused TS to
> do everything you said and even more. I scratched my head, stomped my
> feet
> and said peanuts more than once.
>
> Walter
> ----- Original Message -----
> From: "peter" <peter@xxxxxxxxxxxx>
> To: <omega-list@xxxxxxxxxx>
> Sent: Tuesday, February 22, 2005 10:57 AM
> Subject: Help. Charts constantly re-setting problem
>
>
> > Hi,
> >
> >
> >
> > I'm using 2000i. Recently the program has developed a problem which
> > I can't seem to resolve.
> >
> >
> >
> > Every new tick of data is causing my charts to re-set. When new
> > tick comes in the following things happen:
> >
> >
> >
> > 1) The entire chart flickers
> >
> > 2) The cursor momentarily flickers to egg timer
> >
> > 3) If I'm scrolled back in the chart, then it automatically
goes
> > back to present time. This effectively means I can't scroll back in
> time
> > because the new ticks come in faster than I can scroll
> >
> > 4) If I have the cursor on "vertical chart status" then the
> > vertical line instantly shifts from where I put it to the extreme
> right
> > of the chart
> >
> >
> >
> > This is with "time" charts both minutes, daily etc. In the case of
> tick
> > charts it is much worse as the screen blanks out with each new tick
> and
> > re-sets - this leads to the program freezing as it can't handle
> > doing that with each tick! So I can no longer use tick charts at
> > all.
> >
> >
> >
> > It's basically as if some command to re-set all charts on each new
> tick
> > has been applied to the program.
> >
> >
> >
> > So far I've tried:
> >
> >
> >
> > 1) Updating my video driver.
> >
> > 2) Doing system restore 1 month back, and
> >
> > 3) Re-installing the program.
> >
> >
> >
> > None of these have worked. I'm out of ideas. Has anybody else ever
> > had this problem and found a solution?
> >
> >
> >
> > Help gratefully accepted.....Thanks in advance.
> >
> >
> >
> > Peter
> >
> >
>
>
>
>
|