|
PureBytes Links
Trading Reference Links
|
just as I was getting ready to answer this!! oh well it more than likely
the ssiact file that has mismatched values every time I had a problem this
was what it was !!
----- Original Message -----
From: "Ron Augustine" <RonAug@xxxxxxxxxxxxx>
To: "John Feltovich" <jefmef@xxxxxxxxxxxxxxxx>
Cc: <omega-list@xxxxxxxxxx>
Sent: Monday, April 29, 2002 11:11 AM
Subject: Re: security block
> There are several possibilities -- best to start by running SSIACT to see
> if it generates different values than you're currently using -- if so,
> change them. If you have a printer connected to the Dongle, try launching
> the Server with both power-on and off.
>
> Something could be malfunctioning in the circuit of the Parallel Port. If
> it's the old type Port that is fed from the motherboard by a ribbon cable,
> you could un-plug the cable from the board and re-plug it. Re-seating all
> the connectors on the motherboard and devices (hard-drive CD-Rom, etc.) is
> sometimes necessary in older machines.
>
> If the Port is on a peripheral card, you could remove the card and re-fit
> it into the slot-- or you may need to put it in another Slot. (the problem
> could be related to the Slot). Doing either or both of these "fixes"
> causes the connectors to re-establish a workable electrical connection.
>
> If none of this works or is applicable, you could get a new Parallel Port
> card and install it in an available Slot. It will probably install as
LPT2
> so you'll need to either make that adjustment in the SSIACT program or
> disable your LPT1 Port in your BIOS --
>
> You could also check the archives for various responses to this problem in
> the past --
> _____________________________________
> At 11:49 AM 04/29/2002 -0400, you wrote:
> >Hello List,
> > I keep getting this message when I try and start Omega Server.
Security
> >block is missing. Please install security block and try again. I have
> >re-installed and it still won't start. First problem like this in years.
> >Any help would be apprecaited.
> >Thanks in advance.
> >John
>
>
|