[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: NEED TO RESOLVE, PLEASE HELP



PureBytes Links

Trading Reference Links

Thanks, Mark

That cleared my confusion.
I do have Termal Silver Paste that I "spread" gently on CPU chip,
which is metal part. A bit to much.  Termal Silver Paste do not
conduct electricity.
I appreciate your concern about setting BIOS - OFF at 50C.

Thanks again,
Val

----- Original Message -----
From: "Mark Brown" <markbrown@xxxxxxxxxxxxx>
To: "Igor Kaplun" <ikaplun@xxxxxxxxxxxxxxxx>
Cc: "OMEGA-LIST" <omega-list@xxxxxxxxxx>
Sent: Tuesday, February 26, 2002 11:26 AM
Subject: Re: NEED TO RESOLVE, PLEASE HELP


> Hello  Igor,
>
> YEA! forget any extra left overs, like those weird connections, i
have
> em  too.  you  think too much, relax.  btw make damm sure you have
the
> heat  sink  paste  between the cpu and the fan housing.  or if you
use
> the  Teflon  tape make sure you peel off the protective covering
prior
> to  mounting  the fan on the cpu.  or you may toast your cpu.
install
> the  thermal  sensor sticking it up near the cpu and when you crank
it
> up go into the bios and see what the temp is.  you can set the bios
to
> shut  down  the computer if the temp reaches a certain temp i set
mine
> to 50 c i think.  good luck.
>
> IK> I  finished  all  parts  of  installation  on  "SOLTEK
SL-75DRV2"
> IK> motherboard alone with AMD Athlon 1900+. There is some three
weird
> IK> connections  are  comming from Power Supply 431W Enermax. I
cannot
> IK> figure  out  what to do with it. I presume that I should just
drop
> IK> it or forget about it.
>
> ps  when  you get this one done you will look back and think how
easy!
> also  set your bios to first boot using the cdrom - then just put
your
> win  os cd  in the cdrom and reboot when you do it will basically
walk
> you  thru  the  install of the os, very easy. it will format your
hard
> drive for you too.
>
> --
>
> Have a Great Day, Mark
>
> http://www.markbrown.com
>