|
PureBytes Links
Trading Reference Links
|
Another suggestion to try an isolate the problem.
6. Try running the nightly maintenance with only the GS running. Close TS
charting.
----- Original Message -----
From: "BobR" <bobrabcd@xxxxxxxxxxxxx>
To: "Shadowover BillCruz" <trad_delist_payback@xxxxxxxxx>;
<omega-list@xxxxxxxxxx>
Sent: Tuesday, January 15, 2002 6:58 AM
Subject: Re: Continual TS 2000i Global Server freeze at nightly maintenance
?
> Suggestions and guesses to try one at a time. First change the
maintenance
> time to halfway between the day session and night session so you can
monitor
> it while awake.
> 1. Reduce the baudrate to 230K. Some receivers have problems at 430K.
The
> GS may have problems reconnecting after maintenance.
> 2. Since it happens everynight there might be a registry error. The hex
> instruction looks like something that might be seen in the reg...could be
> total BS on this one...just guessing.
> 3. If it is truly a memory error, then try running the machine with one
less
> stick, do the maintenance and see if the stick can be located or..
> 3.a Swap memory stick locations and see if the error changes although
> referenced memory may not apply here.
> 4. Try a different update time. DTN does updates 4 times a day and the GS
> may have a problem communicating after its maintenance is done.
> 5. Make sure no other programs are running during maintenance. Close
> everything possible except the Windows Task Monitor and watch the
Phyusical
> Memory Available and compare it to the Total. See it the Available drops
to
> a low level in comparison to Total.
>
> anyother suggestions?
>
> bobr
>
> ----- Original Message -----
> From: "Shadowover BillCruz" <trad_delist_payback@xxxxxxxxx>
> To: <omega-list@xxxxxxxxxx>
> Sent: Monday, January 14, 2002 9:48 PM
> Subject: Continual TS 2000i Global Server freeze at nightly maintenance ?
>
>
> >
> > Suggestions to fix this appreciated:
> >
> > Anybody ever experienced Global server version 822
> > freezing or crashing only during nightly maintenance
> > (consistently, every night).
> >
> > I've got DTN feed using Win 2000 OS service pack 2,
> > not running any other programs. 512 MB RAM, New Abit
> > KG-7 motherboard, AMD 1600XP CPU, 800MB pagefile,
> > Byterunner high speed serial card set to 460,800 on
> > COM 4 and DTN receiver to match. Scandisk and defrag
> > performed often.
> >
> > Error message states:
> >
> > Server.exe - Application error
> > The instruction "0x6c371351" referenced memory
> > at "0x00000004". The memory could not be read.
> >
> > Click on OK to terminate the program.
> >
> > Any suggestions appreciated - search of web and groups
> > only shows Macromedia Dreamweaver software users
> > experiencing same error code on occassion. My server
> > crashes EVERY night.
> >
> >
> > Shadow
> >
>
|