|
PureBytes Links
Trading Reference Links
|
If you don't change of head, you may have a signal but the box 100 % may not
be able to read the packet ? No ?
At the maintenance they told me to change the head. they sent me it with the
new receiver box.
Emmanuel
----- Original Message -----
From: BobR <bobrabcd@xxxxxxxxxxxxx>
To: evrard_eng <evrard_eng@xxxxxxxxxxxxx>
Cc: <omega-list@xxxxxxxxxx>
Sent: Sunday, November 19, 2000 10:46 AM
Subject: Re: DTN receiver
> I checked with tech support when the receiver arrived without a new lnb
and
> they said the old one would work providing it was rotated 90 degrees so
that
> the polarization was changed from vertical to horizontal. I have just now
> changed the LNB and diddled with the polarization again and it looks like
> the signal is steady and strong with Quality level of 96, 97, 98. I also
> changed the LNB as I ended up with two back in May.
>
> Bob
>
> ----- Original Message -----
> From: "evrard_eng" <evrard_eng@xxxxxxxxxxxxx>
> To: "BobR" <bobrabcd@xxxxxxxxxxxxx>
> Cc: <omega-list@xxxxxxxxxx>
> Sent: Sunday, November 19, 2000 7:30 AM
> Subject: Re: DTN receiver
>
>
> > Hi Bobr
> >
> >
> > With the new receiver, they sent me the new satelitte Head. I know that
it
> > can not work with the previous one.
> >
> > Maybe this is the problem ?!
> >
> > Emmanuel
> >
> > ----- Original Message -----
> > From: BobR <bobrabcd@xxxxxxxxxxxxx>
> > To: evrard_eng <evrard_eng@xxxxxxxxxxxxx>
> > Cc: <omega-list@xxxxxxxxxx>
> > Sent: Sunday, November 19, 2000 8:11 AM
> > Subject: Re: DTN receiver
> >
> >
> > > Thanks, Emmanual. My location is in sunny, clear sky, desert area on
> the
> > > Arizona California border with no obstructions in the signal path.
The
> > dish
> > > sits on the ground where it is easy to adjust. I have tried
realigning
> > > azimuth, elevation and the LNB and the signal is now around 94, but it
> > isn't
> > > stable. Signal Quality will suddenly change to 45 or lower.
> Transponder
> > > lock says Yes even though the quality varies all over the scale. Last
> > night
> > > it even said 100. I am really puzzled with this. I tried a short 6
> foot
> > > coax cable as well as the long one. Tried a different power supply
and
> > > different AC power cord. Today I am going to try a different LNB.
Did
> a
> > > new LNB come with your receiver or are you using the one with the
> previous
> > > receiver. The rcvr version is V1.03.01.
> > >
> > > Bob
> > > ----- Original Message -----
> > > From: "evrard_eng" <evrard_eng@xxxxxxxxxxxxx>
> > > To: "BobR" <bobrabcd@xxxxxxxxxxxxx>
> > > Cc: <omega-list@xxxxxxxxxx>
> > > Sent: Saturday, November 18, 2000 9:39 PM
> > > Subject: Re: DTN receiver
> > >
> > >
> > > > Hi bobr,
> > > >
> > > > I don't have this problem, I keep the signal since weeks without any
> pb.
> > I
> > > > don't have any error my strength signal is 72 actually
> > > > in Florida with a good weather condition, how is your weather witch
> > > version
> > > > do you have on your receiver box ?
> > > > I have B1.03.05
> > > >
> > > > Emmanuel
> > > > ----- Original Message -----
> > > > From: BobR <bobrabcd@xxxxxxxxxxxxx>
> > > > To: <omega-list@xxxxxxxxxx>
> > > > Sent: Saturday, November 18, 2000 4:58 PM
> > > > Subject: DTN receiver
> > > >
> > > >
> > > > > Just wondering if anyone else who has installed this new receiver,
> has
> > > > been
> > > > > monitoring their packet errors this weekend? Any problems staying
> > > locked
> > > > > on? At peak alignment the Quality level is 90 or higher and the
> > Current
> > > > is
> > > > > a point or two lower. LNB offset is right on 0 vs +8,-8 range.
Am
> > > using
> > > > > the same coax as with the previous receiver. This dish has a
clear
> > path
> > > > to
> > > > > the satellite but after being locked on for awhile it drifts and
> loses
> > > > lock
> > > > > on. Then the packet errors skyrocket during that drift.
> > > > >
> > > > > BobR
> > > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
|