[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DTN receiver



PureBytes Links

Trading Reference Links

Hi Bobr


With the new receiver, they sent me the new satelitte Head. I know that it
can not work with the previous one.

Maybe this is the problem ?!

Emmanuel

----- Original Message -----
From: BobR <bobrabcd@xxxxxxxxxxxxx>
To: evrard_eng <evrard_eng@xxxxxxxxxxxxx>
Cc: <omega-list@xxxxxxxxxx>
Sent: Sunday, November 19, 2000 8:11 AM
Subject: Re: DTN receiver


> Thanks, Emmanual.  My location is in sunny, clear sky, desert area on the
> Arizona California border with no obstructions in the signal path.  The
dish
> sits on the ground where it is easy to adjust.  I have tried realigning
> azimuth, elevation and the LNB and the signal is now around 94, but it
isn't
> stable.  Signal Quality will suddenly change to 45 or lower.  Transponder
> lock says Yes even though the quality varies all over the scale.  Last
night
> it even said 100.  I am really puzzled with this.  I tried a short 6 foot
> coax cable as well as the long one.  Tried a different power supply and
> different AC power cord.  Today I am going to try a different LNB.  Did a
> new LNB come with your receiver or are you using the one with the previous
> receiver.  The rcvr version is V1.03.01.
>
> Bob
> ----- Original Message -----
> From: "evrard_eng" <evrard_eng@xxxxxxxxxxxxx>
> To: "BobR" <bobrabcd@xxxxxxxxxxxxx>
> Cc: <omega-list@xxxxxxxxxx>
> Sent: Saturday, November 18, 2000 9:39 PM
> Subject: Re: DTN receiver
>
>
> > Hi bobr,
> >
> > I don't have this problem, I keep the signal since weeks without any pb.
I
> > don't have any error my strength signal is 72 actually
> > in Florida with  a good weather condition, how is your weather witch
> version
> > do you have on your receiver box ?
> > I have B1.03.05
> >
> > Emmanuel
> > ----- Original Message -----
> > From: BobR <bobrabcd@xxxxxxxxxxxxx>
> > To: <omega-list@xxxxxxxxxx>
> > Sent: Saturday, November 18, 2000 4:58 PM
> > Subject: DTN receiver
> >
> >
> > > Just wondering if anyone else who has installed this new receiver, has
> > been
> > > monitoring their packet errors this weekend?  Any problems staying
> locked
> > > on?  At peak alignment the Quality level is 90 or higher and the
Current
> > is
> > > a point or two lower.  LNB offset is right on 0 vs +8,-8 range.  Am
> using
> > > the same coax as with the previous receiver.  This dish has a clear
path
> > to
> > > the satellite but after being locked on for awhile it drifts and loses
> > lock
> > > on.  Then the packet errors skyrocket during that drift.
> > >
> > > BobR
> > >
> >
> >
> >
>