[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EquisMetaStock Group] Re: new indicator needed...help



PureBytes Links

Trading Reference Links

Sunil,

Then there is no reason why the explorer should not work. Remember 
that you will only get a signal on the day the signal is given. Find 
a couple of securities with signal days and make a note of the date 
the signal was given. In the explorer you can scan for those 
particular dates and securities. 

In the explorer you will see buttons across the bottom...starts with 
OK and ends with HELP. Click on OPTIONS. Enter the date of the 
signal and the date of the security. Then run the explorer. That 
should do the trick.

Preston



--- In equismetastock@xxxxxxxxxxxxxxx, "SUNIL gupta" 
<sunilgupta72@xxx> wrote:
>
> Preston,
> 
> Yes it works.. i plotted on chart and it gace single day signal
> 
> Sunil
> 
> 
> On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx> wrote:
> >
> >   Sunil,
> >
> > Just want to meake sure the indicator works. The indicator will 
give
> > single day signals.
> >
> > Preston
> >
> > --- In equismetastock@xxxxxxxxxxxxxxx <equismetastock%
40yahoogroups.com>,
> > "SUNIL gupta"
> > <sunilgupta72@> wrote:
> > >
> > > Preston,
> > > If i Plot the indicator on chart then how will i explore..i 
needed
> > a
> > > explore to detect if any buy singnal has been generated today 
from
> > a list of
> > > stocks.
> > >
> > > sunil
> > >
> > >
> > >
> > > On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>>
> > wrote:
> > > >
> > > > Sunil,
> > > >
> > > > Plot the indicator on a chart and see if it works. Don't see 
a
> > > > problem but will check later.
> > > >
> > > > Preston
> > > >
> > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com><equismetastock%
> > 40yahoogroups.com>,
> > > > "SUNIL gupta"
> > > > <sunilgupta72@> wrote:
> > > > >
> > > > > Preston,
> > > > >
> > > > > I ran the explorer but it doesnt show any results.. i also 
tried
> > > > running it
> > > > > on a specific date on which buy was triggered but it still 
didnt
> > > > show any
> > > > > results...kindly check.
> > > > >
> > > > > regards,
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>>
> > > > wrote:
> > > > > >
> > > > > > Sunil,
> > > > > >
> > > > > > What were the results of your test?
> > > > > >
> > > > > > The Explorer would be taken off of the Sunil Trade 
Indicator
> > > > > >
> > > > > > Column A:{Buys}
> > > > > > N:= H>=Ref(HHV(H,50),-1);
> > > > > > X:= L<=Ref(LLV(L,25),-1);
> > > > > > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > > > > > Nbar:=Tr AND Alert(Tr=0,2);
> > > > > > nbar;
> > > > > >
> > > > > > Column B:{Sells}
> > > > > > N:= H>=Ref(HHV(H,50),-1);
> > > > > > X:= L<=Ref(LLV(L,25),-1);
> > > > > > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > > > > > Ex:=ExtFml("ForumDLL.Latch",X,N,0,0);
> > > > > > xbar:=Ex AND Alert(Ex=0,2);
> > > > > > xbar;
> > > > > >
> > > > > > Preston
> > > > > >
> > > > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com><equismetastock%
> > > > 40yahoogroups.com>,
> > > > > > "SUNIL gupta"
> > > > > > <sunilgupta72@> wrote:
> > > > > > >
> > > > > > > Preston,
> > > > > > >
> > > > > > > I did back test and seem to like it. Please Help me 
with
> > making
> > > > > > explorer of
> > > > > > > buys trigerred on particular day.
> > > > > > >
> > > > > > > Sunil
> > > > > > >
> > > > > > >
> > > > > > > On 6/7/07, pumrysh <no_reply@xxxxxxxxxxxxxxx<no_reply%
40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>>
> > > > > > wrote:
> > > > > > > >
> > > > > > > > Sunil,
> > > > > > > >
> > > > > > > > Sorry to say that I have not.
> > > > > > > >
> > > > > > > > Preston
> > > > > > > >
> > > > > > > > --- In equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com><equismetastock%
> > > > > > 40yahoogroups.com>,
> > > > > > > > "SUNIL gupta"
> > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > >
> > > > > > > > > Preston,
> > > > > > > > >
> > > > > > > > > i was working on the turtle formula to improve it
> > further. I
> > > > > > just
> > > > > > > > wanted to
> > > > > > > > > know if u have back tested the system at your end 
and
> > what
> > > > did
> > > > > > u
> > > > > > > > find the
> > > > > > > > > success ratio, specially in momentum stocks?
> > > > > > > > >
> > > > > > > > > sunil
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 6/6/07, pumrysh 
<no_reply@xxxxxxxxxxxxxxx<no_reply%40yahoogroups.com>
> > <no_reply%
> > 40yahoogroups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>>
> > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Separately on the chart...goes on the price plot.
> > > > > > > > > >
> > > > > > > > > > Preston
> > > > > > > > > >
> > > > > > > > > > --- In 
equismetastock@xxxxxxxxxxxxxxx<equismetastock%40yahoogroups.com>
> > <equismetastock%
> > 40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > >
> > > > > > > > > > > Preston,
> > > > > > > > > > >
> > > > > > > > > > > Where do i put this formula?..In expert 
advisor or
> > > > > > seperatekly?
> > > > > > > > > > >
> > > > > > > > > > > Sunil
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On 6/5/07, pumrysh
> > <no_reply@xxxxxxxxxxxxxxx <no_reply%40yahoogroups.com><no_reply%
40yahoogr
> > oups.com>
> > > > <no_reply%
> > > > 40yahoogroups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > Sunil,
> > > > > > > > > > > >
> > > > > > > > > > > > You have been a good student!
> > > > > > > > > > > >
> > > > > > > > > > > > Here is a stop to place on the chart:
> > > > > > > > > > > >
> > > > > > > > > > > > {Sunil Stop}
> > > > > > > > > > > > X:=LLV(L,25){exit signal};
> > > > > > > > > > > > x;
> > > > > > > > > > > >
> > > > > > > > > > > > I'll put together a commentary and place it 
in the
> > > > files
> > > > > > > > section
> > > > > > > > > > > > shortly. It will require that all indicators 
are
> > in
> > > > the
> > > > > > > > indicator
> > > > > > > > > > > > list and labeled just as they have been in 
the
> > text.
> > > > > > > > > > > >
> > > > > > > > > > > > Preston
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --- In
> > equismetastock@xxxxxxxxxxxxxxx <equismetastock%40yahoogroups.com>
> > <equismetastock%40yahoogroups.com>
> > > > <equismetastock%
> > > > 40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com>
> > > > > > > > <equismetastock%
> > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Dear Preston,
> > > > > > > > > > > > >
> > > > > > > > > > > > > Outstanding...the thing works perfectly 
fine. I
> > > > > > changed the
> > > > > > > > > > file
> > > > > > > > > > > > name to
> > > > > > > > > > > > > forumdll.Latch and it works. Now just a 
little
> > > > > > improvement
> > > > > > > > is
> > > > > > > > > > > > needed and
> > > > > > > > > > > > > that is supposing after a buy signal is
> > > > generated ..is
> > > > > > > > there
> > > > > > > > > > any
> > > > > > > > > > > > way we can
> > > > > > > > > > > > > find out what will be stop loss rate for 
next
> > day.
> > > > > > Maybe
> > > > > > > > we can
> > > > > > > > > > > > draw a
> > > > > > > > > > > > > trailing line or maybe it can show in
> > commnetary box
> > > > > > that
> > > > > > > > stop
> > > > > > > > > > for
> > > > > > > > > > > > tomorrow
> > > > > > > > > > > > > is such and such rate. I understand the 
rate
> > will
> > > > > > change
> > > > > > > > with
> > > > > > > > > > each
> > > > > > > > > > > > passing
> > > > > > > > > > > > > day.
> > > > > > > > > > > > >
> > > > > > > > > > > > > To know the stop loss will help us . Let me
> > explain
> > > > > > with
> > > > > > > > > > example:-
> > > > > > > > > > > > >
> > > > > > > > > > > > > Supposing I buy Share of COmpany XYZ at RS 
100
> > after
> > > > > > the
> > > > > > > > buy
> > > > > > > > > > > > signal is
> > > > > > > > > > > > > generated. After three months share price
> > touches
> > > > 300.
> > > > > > Now
> > > > > > > > next
> > > > > > > > > > > > day I want
> > > > > > > > > > > > > to put a stop loss order as i think the 
share
> > price
> > > > can
> > > > > > > > tank.
> > > > > > > > > > So
> > > > > > > > > > > > how will i
> > > > > > > > > > > > > know what is the 25 days lowest which will 
be
> > its
> > > > stop
> > > > > > loss
> > > > > > > > > > level.
> > > > > > > > > > > > WE can do
> > > > > > > > > > > > > two things..either there should be a line 
like
> > in
> > > > > > moving
> > > > > > > > > > averages
> > > > > > > > > > > > that will
> > > > > > > > > > > > > continously tell us about stop loss level 
or we
> > can
> > > > put
> > > > > > > > that
> > > > > > > > > > value
> > > > > > > > > > > > in
> > > > > > > > > > > > > commnetary box.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Let me know what you think. And once again
> > Preston
> > > > > > thanks
> > > > > > > > for
> > > > > > > > > > your
> > > > > > > > > > > > immense
> > > > > > > > > > > > > help.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sunil gupta
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > On 6/4/07, pumrysh
> > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%
40yahoogroups.com><no_reply%40yahoogr
> > oups.com><no_reply%
> > 40yahoogr
> > > > oups.com>
> > > > > > <no_reply%
> > > > > > 40yahoogroups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <no_reply%
> > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Not a big problem.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > One of two problems and there are several
> > ways to
> > > > > > fix it.
> > > > > > > > > > There
> > > > > > > > > > > > were
> > > > > > > > > > > > > > two DLL files in the folder, one that 
Roy had
> > > > > > uploaded
> > > > > > > > and
> > > > > > > > > > one
> > > > > > > > > > > > that
> > > > > > > > > > > > > > I uploaded. Either you uploaded the 
wrong one
> > or I
> > > > > > wrote
> > > > > > > > the
> > > > > > > > > > > > > > indicators based on the wrong one.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Here are the two DLL calls:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > ExtFml( "Forum.Latch", LE, LX, SE, SX)
> > > > > > > > > > > > > > ExtFml( "ForumDLL.Latch", LE, LX, SE, SX)
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Notice that the only difference are the
> > > > > > > > words "Forum.Latch"
> > > > > > > > > > > > > > and "ForumDLL.Latch"
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > You can either upload the other DLL or 
change
> > the
> > > > > > > > formulas
> > > > > > > > > > to:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Tr:=ExtFml("ForumDLL.Latch",N,X,0,0);
> > > > > > > > > > > > > > Ex:=ExtFml("ForumDLL.Latch",X,N,0,0);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > This should fix the problem. If not let 
me
> > know.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --- In
> > > > equismetastock@xxxxxxxxxxxxxxx <equismetastock%
40yahoogroups.com><equismetastock%40yahoogroups.com>
> > > > <equismetastock%40yahoogroups.com>
> > > > > > <equismetastock%
> > > > > > 40yahoogroups.com>
> > > > > > > > <equismetastock%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <equismetastock%
> > > > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Preston,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I am having problems installing it. It 
gives
> > > > > > message
> > > > > > > > This
> > > > > > > > > > DLL
> > > > > > > > > > > > does
> > > > > > > > > > > > > > not Exist
> > > > > > > > > > > > > > > in MSX DLL folder (forum.latch)
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Sunil
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On 6/4/07, pumrysh
> > > > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%40yahoogroups.com> 
<no_reply%
> > 40yahoogroups.com><no_reply%40yahoogr
> > > > oups.com><no_reply%
> > > > 40yahoogr
> > > > > > oups.com>
> > > > > > > > <no_reply%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <no_reply%
> > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Outstanding! The fact that it shows 
in the
> > > > > > builder
> > > > > > > > means
> > > > > > > > > > > > that it
> > > > > > > > > > > > > > > > should be working.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > The expert is in the files section 
under
> > Sunil
> > > > > > > > Turtle.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Let me explain why I chose to use a 
DLL.
> > > > > > Typically in
> > > > > > > > > > > > Metastock
> > > > > > > > > > > > > > we
> > > > > > > > > > > > > > > > are limited in our ability to choose 
a
> > value
> > > > > > based on
> > > > > > > > > > > > anything
> > > > > > > > > > > > > > other
> > > > > > > > > > > > > > > > than a constant. We can assign or 
select a
> > > > value
> > > > > > but
> > > > > > > > if
> > > > > > > > > > the
> > > > > > > > > > > > > > value is
> > > > > > > > > > > > > > > > to change from one bar to the next we
> > cannot
> > > > do
> > > > > > > > that. An
> > > > > > > > > > > > example
> > > > > > > > > > > > > > > > would be a moving average that uses
> > variable
> > > > > > lookback
> > > > > > > > > > > > periods.
> > > > > > > > > > > > > > Say
> > > > > > > > > > > > > > > > that instead of a 10 day MA, we 
instead
> > > > wanted a
> > > > > > RSI
> > > > > > > > (14)
> > > > > > > > > > day
> > > > > > > > > > > > MA.
> > > > > > > > > > > > > > > > Meaning the value of the lookback 
might
> > be 10
> > > > > > today
> > > > > > > > > > because
> > > > > > > > > > > > the
> > > > > > > > > > > > > > RSI
> > > > > > > > > > > > > > > > (14) is 10 but tomorrow if the RSI
(14) is
> > 20
> > > > then
> > > > > > > > our MA
> > > > > > > > > > > > lookback
> > > > > > > > > > > > > > > > would also be 20. This can only be 
done by
> > > > using
> > > > > > a
> > > > > > > > DLL
> > > > > > > > > > or in
> > > > > > > > > > > > some
> > > > > > > > > > > > > > > > cases with a prev value which is so 
slow
> > that
> > > > our
> > > > > > > > > > > > calculations
> > > > > > > > > > > > > > would
> > > > > > > > > > > > > > > > be extremely slow.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > The expert that I have written will 
give
> > you a
> > > > > > signal
> > > > > > > > > > > > indicator
> > > > > > > > > > > > > > for
> > > > > > > > > > > > > > > > your chart, as well trend, 
highlight, and
> > > > > > buy/sell
> > > > > > > > > > symbols
> > > > > > > > > > > > for
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > expert. It uses the forum latch 
indicator.
> > > > Trends
> > > > > > (Tr)
> > > > > > > > > > give a
> > > > > > > > > > > > > > > > constant signal while bar signals
> > (Nbar,Xbar)
> > > > > > give a
> > > > > > > > > > single
> > > > > > > > > > > > event
> > > > > > > > > > > > > > > > signal.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Give this a test run and let me know 
what
> > you
> > > > > > think.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > --- In
> > > > > > equismetastock@xxxxxxxxxxxxxxx <equismetastock%
40yahoogroups.com><equismetastock%
> > 40yahoogroups.com><equismetastock%40yahoogroups.com>
> > > > > > <equismetastock%40yahoogroups.com>
> > > > > > > > <equismetastock%
> > > > > > > > 40yahoogroups.com>
> > > > > > > > > > <equismetastock%
> > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > <equismetastock%
> > > > > > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > I have DLL installed and it shows 
In my
> > > > > > indicator
> > > > > > > > > > builder
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Sunil
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On 6/2/07, pumrysh
> > > > > > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%
40yahoogroups.com><no_reply%40yahoogr
> > oups.com>
> > <no_reply%
> > > > 40yahoogroups.com><no_reply%40yahoogr
> > > > > > oups.com><no_reply%
> > > > > > 40yahoogr
> > > > > > > > oups.com>
> > > > > > > > > > <no_reply%
> > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > I'm actually waiting on you. You 
are
> > > > going to
> > > > > > > > need to
> > > > > > > > > > > > have
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > DLL
> > > > > > > > > > > > > > > > > > uploaded and working.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > --- In
> > > > > > > > equismetastock@xxxxxxxxxxxxxxx<equismetastock%
40yahoogroups.com><equismetastock%
> > 40yahoogroups.com><equismetastock%
> > > > 40yahoogroups.com><equismetastock%40yahoogroups.com>
> > > > > > > > <equismetastock%40yahoogroups.com>
> > > > > > > > > > <equismetastock%
> > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > <equismetastock%
> > > > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > <equismetastock%
> > > > > > > > > > > > > > 40yahoogroups.com><equismetastock%
> > > > > > > > > > > > > > > > 40yahoogroups.com>,
> > > > > > > > > > > > > > > > > > "SUNIL gupta"
> > > > > > > > > > > > > > > > > > <sunilgupta72@> wrote:
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > PReston,
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Thanks for the help. After 
reading
> > that
> > > > > > manual
> > > > > > > > i
> > > > > > > > > > think
> > > > > > > > > > > > > > after
> > > > > > > > > > > > > > > > some
> > > > > > > > > > > > > > > > > > practice i
> > > > > > > > > > > > > > > > > > > will be able to make quite a 
lot of
> > > > > > formula.
> > > > > > > > > > > > > > > > > > > AND how are we moving with the
> > > > advisor?...I
> > > > > > > > just
> > > > > > > > > > cant
> > > > > > > > > > > > > > express
> > > > > > > > > > > > > > > > in
> > > > > > > > > > > > > > > > > > words the
> > > > > > > > > > > > > > > > > > > help you have been and 
knowledge
> > that i
> > > > am
> > > > > > > > getting
> > > > > > > > > > from
> > > > > > > > > > > > > > reading
> > > > > > > > > > > > > > > > > > various
> > > > > > > > > > > > > > > > > > > mails and manuals here.
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Thanks
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Sunil
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > On 6/2/07, pumrysh
> > > > > > > > > > <no_reply@xxxxxxxxxxxxxxx <no_reply%
40yahoogroups.com><no_reply%
> > 40yahoogroups.com><no_reply%40yahoogr
> > > > oups.com>
> > > > <no_reply%
> > > > > > 40yahoogroups.com><no_reply%40yahoogr
> > > > > > > > oups.com><no_reply%
> > > > > > > > 40yahoogr
> > > > > > > > > > oups.com>
> > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > > > <no_reply%
> > > > > > > > > > > > > > > > 40yahoogroups.com>>
> > > > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Sunil,
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > We're getting very close now.
> > Need to
> > > > do
> > > > > > a
> > > > > > > > few
> > > > > > > > > > more
> > > > > > > > > > > > > > things
> > > > > > > > > > > > > > > > though
> > > > > > > > > > > > > > > > > > > > before we go any further.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > First, I want you to go to 
the
> > files
> > > > > > section
> > > > > > > > and
> > > > > > > > > > > > retrieve
> > > > > > > > > > > > > > > > several
> > > > > > > > > > > > > > > > > > > > things.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > 1. Using Latches in MS doc 
by Roy
> > > > Larsen
> > > > > > > > > > > > > > > > > > > > 2. Equis Forum DLL...this 
will be
> > > > inside
> > > > > > the
> > > > > > > > > > folder
> > > > > > > > > > > > and
> > > > > > > > > > > > > > is
> > > > > > > > > > > > > > > > the one
> > > > > > > > > > > > > > > > > > > > that Roy placed there. While 
you
> > are
> > > > > > there
> > > > > > > > get
> > > > > > > > > > the
> > > > > > > > > > > > DLL
> > > > > > > > > > > > > > users
> > > > > > > > > > > > > > > > > > manual.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Then I want you to study 
them a
> > bit so
> > > > > > that
> > > > > > > > you
> > > > > > > > > > > > > > understand
> > > > > > > > > > > > > > > > how
> > > > > > > > > > > > > > > > > > they
> > > > > > > > > > > > > > > > > > > > work.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > The Metastock community is 
truly
> > > > > > fortunate to
> > > > > > > > > > have a
> > > > > > > > > > > > > > gift in
> > > > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > > > > > talents of Roy and learning 
about
> > > > > > latches and
> > > > > > > > > > dll's
> > > > > > > > > > > > will
> > > > > > > > > > > > > > > > take you
> > > > > > > > > > > > > > > > > > to
> > > > > > > > > > > > > > > > > > > > another level of 
capabilities. Roy
> > > > > > invented
> > > > > > > > > > latches
> > > > > > > > > > > > to
> > > > > > > > > > > > > > > > accomplish
> > > > > > > > > > > > > > > > > > > > exactly what you are trying 
to do.
> > > > Study
> > > > > > > > these
> > > > > > > > > > > > documents!
> > > > > > > > > > > > > > > > They are
> > > > > > > > > > > > > > > > > > > > going to be extremely useful.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > I'll have an expert for you 
in
> > just a
> > > > > > day or
> > > > > > > > so.
> > > > > > > > > > In
> > > > > > > > > > > > the
> > > > > > > > > > > > > > > > meantime
> > > > > > > > > > > > > > > > > > do
> > > > > > > > > > > > > > > > > > > > your homework.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Preston
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > Sunil Gupta
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > [Non-text portions of this message 
have
> > been
> > > > > > > > removed]
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > Sunil Gupta
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [Non-text portions of this message 
have been
> > > > > > removed]
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > Sunil Gupta
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > [Non-text portions of this message have 
been
> > > > removed]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Sunil Gupta
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > [Non-text portions of this message have been
> > removed]
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Sunil Gupta
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [Non-text portions of this message have been 
removed]
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Sunil Gupta
> > > > > > >
> > > > > > >
> > > > > > > [Non-text portions of this message have been removed]
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Sunil Gupta
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Sunil Gupta
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >  
> >
> 
> 
> 
> -- 
> Sunil Gupta
> 
> 
> [Non-text portions of this message have been removed]
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/equismetastock/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/equismetastock/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:equismetastock-digest@xxxxxxxxxxxxxxx 
    mailto:equismetastock-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    equismetastock-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/