|
PureBytes Links
Trading Reference Links
|
What you are asking for is very complex, and it doesn't work all that
well. You would be much, much better off with the B and Q indicators,
Trend Quality Indicators and Trend Noise Balance Indicator, from
Sepiashvili. You can find the correct MS code for these in Roy's
newsletter. www.metastocktips.co.nz The code on the Equis website is
wrong and so is the code in S&C.
I've discussed David's approach with Ehlers, and he likes the way
David goes about this. David's method is tons easier to read and
interpret. I've read all of Ehlers papers and books. I've tested all
of his stuff and basically, it's okay but don't get too worked up.
It's not magic and it really doesn't work any better than simpler
stuff that's been around a long time. The engineer's always get goose
bumps when they read Ehler because they think engineering math is
going to tame the markets. Sorry, no such luck!
Here's David's website: http://www.alticom.com/indicators/overview.html
Here's the MS implementation of approximately what you're looking for.
You left a ton of the TradeStation code out.
I'm going to give you all of the Hilbert formula's because Ehlers uses
all of them in verious indicators. You can read about this non-sense
in the May 2000 S&C.
Ehlers Sine Wave Trend Indicator
pd:=Int(Fml("Hilbert cycle period - final-a"));
cp:=Fml("Hilbert cycle period - final-a");
ip:=Fml( "H ip sum 1") + Fml( "H ip sum 2") +
Fml( "H ip sum 3");
rp:=Fml( "H rp sum 1") + Fml( "H rp sum 2") +
Fml( "H rp sum 3");
dc1:=If(Abs(ip)>0.001, Atan(rp/ip,1), 90*If(rp>=0,1,-1));
dc2:=If(pd<30 AND cp>0,dc1+((6.818/cp - 0.227)*360),dc1);
dc3:=If(ip<0, dc2+270, dc2+90);
dcp:=If(dc3>315, dc3-360, dc3);
Sin(dcp);
Sin(dcp+45)
Name: H cycle count 1a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,6)>=360 AND Sum(value,5)<360 ,6,0) +
If(Sum(value,7)>=360 AND Sum(value,6)<360 ,7,0) +
If(Sum(value,8)>=360 AND Sum(value,7)<360 ,8,0) +
If(Sum(value,9)>=360 AND Sum(value,8)<360 ,9,0) +
If(Sum(value,10)>=360 AND Sum(value,9)<360 ,10,0) +
If(Sum(value,11)>=360 AND Sum(value,10)<360 ,11,0) +
If(Sum(value,12)>=360 AND Sum(value,11)<360 ,12,0) +
If(Sum(value,13)>=360 AND Sum(value,12)<360 ,13,0) +
If(Sum(value,14)>=360 AND Sum(value,13)<360 ,14,0) +
If(Sum(value,15)>=360 AND Sum(value,14)<360 ,15,0)
Name: H cycle count 2a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,16)>=360 AND Sum(value,15)<360 ,16,0) +
If(Sum(value,17)>=360 AND Sum(value,16)<360 ,17,0) +
If(Sum(value,18)>=360 AND Sum(value,17)<360 ,18,0) +
If(Sum(value,19)>=360 AND Sum(value,18)<360 ,19,0) +
If(Sum(value,20)>=360 AND Sum(value,19)<360 ,20,0) +
If(Sum(value,21)>=360 AND Sum(value,20)<360 ,21,0) +
If(Sum(value,22)>=360 AND Sum(value,21)<360 ,22,0) +
If(Sum(value,23)>=360 AND Sum(value,22)<360 ,23,0) +
If(Sum(value,24)>=360 AND Sum(value,23)<360 ,24,0) +
If(Sum(value,25)>=360 AND Sum(value,24)<360 ,25,0)
Name: H cycle count 3a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,26)>=360 AND Sum(value,25)<360 ,26,0) +
If(Sum(value,27)>=360 AND Sum(value,26)<360 ,27,0) +
If(Sum(value,28)>=360 AND Sum(value,27)<360 ,28,0) +
If(Sum(value,29)>=360 AND Sum(value,28)<360 ,29,0) +
If(Sum(value,30)>=360 AND Sum(value,29)<360 ,30,0) +
If(Sum(value,31)>=360 AND Sum(value,30)<360 ,31,0) +
If(Sum(value,32)>=360 AND Sum(value,31)<360 ,32,0) +
If(Sum(value,33)>=360 AND Sum(value,32)<360 ,33,0) +
If(Sum(value,34)>=360 AND Sum(value,33)<360 ,34,0) +
If(Sum(value,35)>=360 AND Sum(value,34)<360 ,35,0)
Name: H ip sum 1
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
(Cos(0)*pr)+
(Cos(360*(1/pd))*Ref(pr,-1))+
(Cos(360*(2/pd))*Ref(pr,-2))+
(Cos(360*(3/pd))*Ref(pr,-3))+
(Cos(360*(4/pd))*Ref(pr,-4))+
(Cos(360*(5/pd))*Ref(pr,-5))+
If(pd>6, Cos(360*(6/pd))*Ref(pr,-6), 0)+
If(pd>7, Cos(360*(7/pd))*Ref(pr,-7), 0)+
If(pd>8, Cos(360*(8/pd))*Ref(pr,-8), 0)+
If(pd>9, Cos(360*(9/pd))*Ref(pr,-9), 0)+
If(pd>10, Cos(360*(10/pd))*Ref(pr,-10), 0)+
If(pd>11, Cos(360*(11/pd))*Ref(pr,-11), 0)+
If(pd>12, Cos(360*(12/pd))*Ref(pr,-12), 0)+
If(pd>13, Cos(360*(13/pd))*Ref(pr,-13), 0)+
If(pd>14, Cos(360*(14/pd))*Ref(pr,-14), 0)
Name: H ip sum 2
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
If(pd>15, Cos(360*(15/pd))*Ref(pr,-15), 0)+
If(pd>16, Cos(360*(16/pd))*Ref(pr,-16), 0)+
If(pd>17, Cos(360*(17/pd))*Ref(pr,-17), 0)+
If(pd>18, Cos(360*(18/pd))*Ref(pr,-18), 0)+
If(pd>19, Cos(360*(19/pd))*Ref(pr,-19), 0)+
If(pd>20, Cos(360*(20/pd))*Ref(pr,-20), 0)+
If(pd>21, Cos(360*(21/pd))*Ref(pr,-21), 0)+
If(pd>22, Cos(360*(22/pd))*Ref(pr,-22), 0)+
If(pd>23, Cos(360*(23/pd))*Ref(pr,-23), 0)+
If(pd>24, Cos(360*(24/pd))*Ref(pr,-24), 0)
Name: H ip sum 3
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
If(pd>25, Cos(360*(25/pd))*Ref(pr,-25), 0)+
If(pd>26, Cos(360*(26/pd))*Ref(pr,-26), 0)+
If(pd>27, Cos(360*(27/pd))*Ref(pr,-27), 0)+
If(pd>28, Cos(360*(28/pd))*Ref(pr,-28), 0)+
If(pd>29, Cos(360*(29/pd))*Ref(pr,-29), 0)+
If(pd>30, Cos(360*(30/pd))*Ref(pr,-30), 0)+
If(pd>31, Cos(360*(31/pd))*Ref(pr,-31), 0)+
If(pd>32, Cos(360*(32/pd))*Ref(pr,-32), 0)+
If(pd>33, Cos(360*(33/pd))*Ref(pr,-33), 0)+
If(pd>34, Cos(360*(34/pd))*Ref(pr,-34), 0)
Name: H rp sum 1
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
(Sin(0)*pr)+
(Sin(360*(1/pd))*Ref(pr,-1))+
(Sin(360*(2/pd))*Ref(pr,-2))+
(Sin(360*(3/pd))*Ref(pr,-3))+
(Sin(360*(4/pd))*Ref(pr,-4))+
(Sin(360*(5/pd))*Ref(pr,-5))+
If(pd>6, Sin(360*(6/pd))*Ref(pr,-6), 0)+
If(pd>7, Sin(360*(7/pd))*Ref(pr,-7), 0)+
If(pd>8, Sin(360*(8/pd))*Ref(pr,-8), 0)+
If(pd>9, Sin(360*(9/pd))*Ref(pr,-9), 0)+
If(pd>10, Sin(360*(10/pd))*Ref(pr,-10), 0)+
If(pd>11, Sin(360*(11/pd))*Ref(pr,-11), 0)+
If(pd>12, Sin(360*(12/pd))*Ref(pr,-12), 0)+
If(pd>13, Sin(360*(13/pd))*Ref(pr,-13), 0)+
If(pd>14, Sin(360*(14/pd))*Ref(pr,-14), 0)
Name: H rp sum 2
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
If(pd>15, Sin(360*(15/pd))*Ref(pr,-15), 0)+
If(pd>16, Sin(360*(16/pd))*Ref(pr,-16), 0)+
If(pd>17, Sin(360*(17/pd))*Ref(pr,-17), 0)+
If(pd>18, Sin(360*(18/pd))*Ref(pr,-18), 0)+
If(pd>19, Sin(360*(19/pd))*Ref(pr,-19), 0)+
If(pd>20, Sin(360*(20/pd))*Ref(pr,-20), 0)+
If(pd>21, Sin(360*(21/pd))*Ref(pr,-21), 0)+
If(pd>22, Sin(360*(22/pd))*Ref(pr,-22), 0)+
If(pd>23, Sin(360*(23/pd))*Ref(pr,-23), 0)+
If(pd>24, Sin(360*(24/pd))*Ref(pr,-24), 0)
Name: H rp sum 3
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2;
If(pd>25, Sin(360*(25/pd))*Ref(pr,-25), 0)+
If(pd>26, Sin(360*(26/pd))*Ref(pr,-26), 0)+
If(pd>27, Sin(360*(27/pd))*Ref(pr,-27), 0)+
If(pd>28, Sin(360*(28/pd))*Ref(pr,-28), 0)+
If(pd>29, Sin(360*(29/pd))*Ref(pr,-29), 0)+
If(pd>30, Sin(360*(30/pd))*Ref(pr,-30), 0)+
If(pd>31, Sin(360*(31/pd))*Ref(pr,-31), 0)+
If(pd>32, Sin(360*(32/pd))*Ref(pr,-32), 0)+
If(pd>33, Sin(360*(33/pd))*Ref(pr,-33), 0)+
If(pd>34, Sin(360*(34/pd))*Ref(pr,-34), 0)
Name: H TL sum 1
value:=Int(Fml("Hilbert cycle period - final-a"));
If(value=6, Mov((H+L)/2,8,S),0) +
If(value=7, Mov((H+L)/2,9,S),0) +
If(value=8, Mov((H+L)/2,10,S),0) +
If(value=9, Mov((H+L)/2,11,S),0) +
If(value=10, Mov((H+L)/2,12,S),0) +
If(value=11, Mov((H+L)/2,13,S),0) +
If(value=12, Mov((H+L)/2,14,S),0) +
If(value=13, Mov((H+L)/2,15,S),0) +
If(value=14, Mov((H+L)/2,16,S),0) +
If(value=15, Mov((H+L)/2,17,S),0)
Name: H TL sum 2
value:=Int(Fml("Hilbert cycle period - final-a"));
If(value=16, Mov((H+L)/2,18,S),0) +
If(value=17, Mov((H+L)/2,19,S),0) +
If(value=18, Mov((H+L)/2,20,S),0) +
If(value=19, Mov((H+L)/2,21,S),0) +
If(value=20, Mov((H+L)/2,22,S),0) +
If(value=21, Mov((H+L)/2,23,S),0) +
If(value=22, Mov((H+L)/2,24,S),0) +
If(value=23, Mov((H+L)/2,25,S),0) +
If(value=24, Mov((H+L)/2,26,S),0) +
If(value=25, Mov((H+L)/2,27,S),0)
Name: H TL sum 3
value:=Int(Fml("Hilbert cycle period - final-a"));
If(value=26, Mov((H+L)/2,28,S),0) +
If(value=27, Mov((H+L)/2,29,S),0) +
If(value=28, Mov((H+L)/2,30,S),0) +
If(value=29, Mov((H+L)/2,31,S),0) +
If(value=30, Mov((H+L)/2,32,S),0) +
If(value=31, Mov((H+L)/2,33,S),0) +
If(value=32, Mov((H+L)/2,34,S),0) +
If(value=33, Mov((H+L)/2,35,S),0) +
If(value=34, Mov((H+L)/2,36,S),0) +
If(value=35, Mov((H+L)/2,37,S),0)
Name: Hilbert cycle period - 1a
value1:=((H+L)/2) - Ref(((H+L)/2),-6);
value2:= Ref(value1,-3);
value3:=0.75*(value1-Ref(value1,-6)) +
0.25*(Ref(value1,-2)-Ref(value1,-4));
inphase:= 0.33 * value2 + (0.67 * PREV);
quad:= 0.2 * value3 + ( 0.8 * PREV);
p1:=Atan(Abs(quad+Ref(quad,-1)),Abs(inphase+Ref(inphase,-1)));
phase:=If(inphase<0 AND quad>0, 180-p1,
If(inphase<0 AND quad<0, 180+p1,
If(inphase>0 AND quad<0, 360-p1,p1)));
dp:=If(Ref(phase,-1)<90 AND phase>270,
360+Ref(phase,-1)-phase,Ref(phase,-1)-phase);
dp2:=If(dp < 1, 1,
If(dp > 60, 60, dp));
dp2
Name: Hilbert cycle period - final-a
c1:= Fml( "H cycle count 1a") + Fml( "H cycle count 2a") + Fml( "H
cycle count 3a") ;
c2:=If(c1=0,PREV,c1);
(0.25*c2) + (0.75*PREV)
Name: Instantaneous Trend Line
pr:=(H+L)/2;
(Fml("H TL sum 1") + Fml("H TL sum 2") + Fml("H TL sum 3"));
0.33*(pr + (0.5*(pr-Ref(pr,-3)))) + (0.67*PREV)
------------------------ Yahoo! Groups Sponsor --------------------~-->
Has someone you know been affected by illness or disease?
Network for Good is THE place to support health awareness efforts!
http://us.click.yahoo.com/Rcy2bD/UOnJAA/cosFAA/BefplB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/equismetastock/
<*> To unsubscribe from this group, send an email to:
equismetastock-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|