|
PureBytes Links
Trading Reference Links
|
Herman and Al,
I took the scissors to my first effort.
It isn't an inline backtester, rather an inline RootCauseMetrics
indicator (possibly it could be used for calculating the common
Performance Metrics 'on the fly', including with lookback periods).
This is the basic starting module.
It should be possible to modify it to allow for concurrent signals,
open trade interest, although it gets a bit harder from here for me
(maybe not for others).
I have checked it over a few charts and so far it stands up O.K
I haven't used in the line of fire though.
Any potential in it for you guys?
FTR
This is a continuation of discussion at topic:
"How To Save Metrics In Composite For Indidual BT's"
A little background discussion about the idea behind the code is at
message # 127383 and # 127420 in the above thread.
//P_InLineMetrics
//Monday is used as the example because it is an unambiguous Buy
//Typically most markets have Mon or Fri public holidays so it allows
for checking code response to duplicate buys and sells (signal errors)
//BarIndex() is added as a buy condition to workaround the
propogating of {empty} values that can arise in the first few bars
//A latch is used so that only one trade can be entered at a time and
every Sell must have a corresponding Buy
//Plots the trade series, as GrowthFactor, which is equivalent to %
//No trades are accounted for and recorded as GF 1
//The code doesn't identify break even trades i.e. GF == 1 but it can
be modified to do so
//since commissions aren't considered the Eq outcome for break even
trades is correct
//the progressive product of the GF is equivalent to the Equity Curve
for a fixed capital investment
//if the intitial Equity is 1 the EQ is the standardised Equity Factor
//Equity == Initial Equity * EF
//the product of individual GF's, sumbol by symbol, is the Portfolio
Growth Factor the progessive product of which produces the Portfolio
Equity Factor
//same bar entry/exits are not allowed but the code can be modified
for that if required
//PART IA TRADE SERIES MODULE (CLOSED TRADES - ONLY ONE TRADE PER
SYMBOL OPEN AT A TIME)
M = DayOfWeek() == 1;
F = DayOfWeek() == 5;
BI = BarIndex()== 0;
B = M;//Buy on Monday
S = F OR BI;//first bar set to sell and then sell on Friday's
thereafter
B = Flip(B,S);//latches the Buy signal to prevent concurrent buys
BP = SP = C;//BuyPrice, SellPrice
//Plot(B,"Buy",5,1);//FFP - fault finding plot used when writing the
code
//Plot(S,"Sell",2,1);//FFP
//Plot(BP,"BuyPrice",5,1);//FFP
//Plot(SP,"SellPrice",2,1);//FFP
TradeSeries = IIf(S ==1 AND Ref(B,-1) == 1,SP/ValueWhen(B == 1 AND Ref
(B,-1) == 0, BP,1),1);//
Plot(TradeSeries,"TradeSeries",1,1);//as GrowthFactor
EF = 1;//initialises EquityFactor to 1
for (i = 1; i < BarCount; i++)
{
EF[i] = EF[i-1] * TradeSeries[i];
}
Plot(EF,"EquityFactor",5,1);
--- In amibroker@xxxxxxxxxxxxxxx, "brian_z111" <brian_z111@xxx> wrote:
>
> Herman,
>
> IBM PartI
>
> I am not sure if this is along the lines that you are investigating.
> It might be a starting point.
> Sophisticated functions can be built from the concept.
>
> Example of using single symbol equity function to back calculate
the
> trade series.
>
> I used buy Tues(C) and sell Thurs(C) with one month of data to test
> the code as I went along (this gave me unambiguous signals with
only
> one signal at a time - I believe you can use an eq flag to dump
dual
> signals for real life use).
>
> Note: some weeks don't have Mons or Fris so I wanted to avoid no
> signals, caused by short weeks, during testing
>
> I used barindex() > 4 to cut out the first week in the month so
that
> I started with no signals for a few bars before the first buy.
>
> I left the plot code in there but commented out (I plotted each
line
> to test the veracity of the code).
>
> Note that when the trade series is used to recreate the eq curve
(as
> a cross check) it only matches on the exit bars for each trade.
> I tried it on 10 years of Yahoo data and the final eqs matched to 2
> decimal places (rounded off).
>
> //P_InLineEquity
> //code to reverse engineer the trade series from the equity curve
> //it is reversed at the end to check the accuracy of the method
>
> InitialEq = 10000;//input required
>
> SetOption("InitialEquity", InitialEq );
>
> Buy = BarIndex() > 4 AND DayOfWeek() == 2;//use your own
> Sell = BarIndex() > 4 AND DayOfWeek() == 4;//use your own
>
> BuyPrice = C;//use your own
> SellPrice = C;//use your own
>
> Plot(Equity(),"Equity",5,1);
>
> Entry = IIf(Equity() == Ref(Equity(),-1) AND Equity() != Ref(Equity
> (),1),1,0);
>
> //Plot(Entry,"Entry",1,1);
>
> Exit = IIf(Equity() != Ref(Equity(),-1) AND Equity() == Ref(Equity
> (),1),1,0);
>
> //Plot(Exit,"Exit",2,1);
>
> TradeSeries = IIf(Exit ==1,ValueWhen(Exit == 1,
SellPrice,1)/ValueWhen
> (Entry == 1, BuyPrice,1),1);
>
> //Plot(TradeSeries,"TradeSeries",1,1);
>
> GF = 1;//GrowthFactor
>
> for (i = 1; i < BarCount; i++)
> {
> GF[i] = GF[i-1] * TradeSeries[i];
> }
>
> //codesters might be able to make the above loop better/prettier?
> //Plot(GF,"GrowthFactor",5,1);
>
>
> Plot(InitialEq * GF,"CalculatedEquity",1,1);
>
------------------------------------
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|