[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[amibroker] Re: Trouble trying to compare industry and market ...

To: amibroker@xxxxxxxxxxxxxxx
Subject: [amibroker] Re: Trouble trying to compare industry and market ...
From: "areehoi" <areehoi@xxxxxxxxx>
Date: Mon, 18 Feb 2008 22:35:44 -0000
PureBytes Links
Trading Reference Links
It would appear you are trying to make a "mountain' Out of a
"molehill". You Database should have Data in the proper Markets,
Sectors and industries.  You data provider should only be providing
the data (OHLCV) that is parsed into the database.  If you use the
US-Stocks database all the stock are in proper market, sectors and
industries. You can use any data feed you desire for it. Then AA will
show NYSE and MSFT Nasdaq etc. You can check this in the "Organize
Assignments" under Symbol drop down. Hope this helps. 

Dick H.

--- In amibroker@xxxxxxxxxxxxxxx, "Louis Préfontaine" <rockprog80@xxx>
wrote:
>
> Hi,
> 
> So there is no way to make the market automatic for each symbol?
(e.g.  for
> MSFT it would be NASDAQ and for AA NYSE)?
> 
> So far here is what I got:
> 
> // Built-in relative performance chart with 3 EMA
> // Par Louis Prefontaine
> 
>  Ticker = GetBaseIndex();// plot industry, need to create composite
sectors
> 
> 
> 
> for( i = 0; ( symbol = StrExtract( ticker, i ) ) != ""; i++ );
> 
>   fc = Foreign( ticker,"C" );
> fc1 = Foreign ("indu.x","C");
> 
> 
> PlotGrid( 0, colorBrown);
> 
> 
> _N( Title = "{{NAME}} - Relative Performance [%]: {{VALUES}}" );
> 
>      ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -10)) ;
> 
> ticker1= ( 100 * ( fc1 - Ref( fc1, -10 ))/Ref (fc1,-10)) ;
> 
> 
> 
> _SECTION_BEGIN("RS-Titre");
> periods = Param( "Periods", 1, 1, 200, 1 );
> Plot( Current ,_DEFAULT_NAME(),  ParamColor( "color", colorRed ),
> ParamStyle("Style",styleDashed) );
> _SECTION_END();
> 
> 
> 
> _SECTION_BEGIN("RS-Secteur");
> periods = Param( "Periods", 1, 1, 200, 1 );
> Plot( ticker ,_DEFAULT_NAME(),  ParamColor( "Color", colorBlue ),
> ParamStyle("Style", styleDashed) );
> _SECTION_END();
> 
> 
> 
> _SECTION_BEGIN("RS-Dow Jones");
> periods = Param( "Periods", 1, 1, 200, 1 );
> Plot( ticker1 ,_DEFAULT_NAME(),  ParamColor( "Color", colorGreen ),
> ParamStyle("Style", styleDashed) );
> _SECTION_END();
> 
> It works well with NYSE stocks, but I'd like some flexibility, been
able to
> adapt to different markets.  Instead of fc1 = Foreign
("indu.x","C");  that
> would have been nice if the market indice would change for each symbol.
> 
> What do you think about this?
> 
> Thanks!
> 
> Louis
> 
> p.s. Is it better for me to erase all the information previous to this
> message or is it ok to let it here?  I read a message saying it was
annoying
> and some people agreed whileo thers disagreed...
> 
> 
> 
> 
> 
> 2008/2/16, Steve Dugas <sjdugas@xxx>:
> >
> >    Oops - forget to answer the first question...
> >
> > Yes, if you already have industries set up for base index, I would
just
> > leave them there and make sure everything in Groups tab is empty.
Then you
> > can use GetBaseIndex to get your industries, and you can easily
use Foreign
> > or SetForeign functions to plot any broad mkt index like S&P, Dow,
NASD,
> > etc..
> >
> > ----- Original Message -----
> > *From:* Steve Dugas <sjdugas@xxx>
> > *To:* amibroker@xxxxxxxxxxxxxxx
> > *Sent:* Saturday, February 16, 2008 9:34 PM
> > *Subject:* Re: [amibroker] Re: Trouble trying to compare industry and
> > market ...
> >
> > OK - IndustryID function takes 1 arg. It can be either 0 or 1. If
you use
> > 0, it returns a stock's industry *number*, so we can test for
that. If you
> > use 1, it returns the stock's industry name, so we could test for
that also.
> > It is easier to use the numbers than the names, but you need to
know them.
> > You can use those 2 lines of code I gave you before to find out
the numbers
> > and names of the different industries and then you can match them
up with
> > their indexes.. So, just suppose for example
> >
> > Gold stocks are industry #1 w/ index XAU
> > Software stocks are industry #2 w/ index SFT
> > etc, etc
> >
> > You could do this to plot the industry...
> >
> > if ( industryID( 0 ) == 1 ) IndustryIDX = "XAU" // if stock
assigned to
> > ind #1, select gold idx
> > else if ( industryID( 0 ) == 2 ) IndustryIDX = "SFT" // if
assigned to ind
> > #2, select software idx
> > etc...
> > else IndustryIDX = "SPX" // default to SP500 if stock not assigned
to any
> > industry
> > SetForeign( IndustryIDX );
> > Plot( Close, "Industry", colorBlack, styleCandle );
> > RestorePriceArrays();
> >
> >
> >
> > ----- Original Message -----
> > *From:* Louis Préfontaine <rockprog80@xxx>
> > *To:* amibroker@xxxxxxxxxxxxxxx
> > *Sent:* Saturday, February 16, 2008 8:49 PM
> > *Subject:* Re: [amibroker] Re: Trouble trying to compare industry and
> > market ...
> >
> > Hi Steve,
> >
> > Thanks for your help.
> >
> > My data provider is IQ-Feed (DTN).
> >
> > Ok, I read again your messages and others messages as well.  If I
> > understand correctly, getbaseindex will return the industry in the
first
> > place.  So, if I simply decide to choose the Dow Jones as the ultimate
> > index, I might get my formula simply by using the foreign command,
is that
> > right?
> >
> > I'm still not sure about Graham's code anyway, but I think I might use
> > more flexibility with sector index...
> >
> > Ok, as an example,  I can use:
> >
> > AEM   with industry index  XAU   and market index  Indu.x
> > TD.to  with industry index c.ttfs.x (financial index)  and market
index
> > t0000.x  (TSX)
> > MSFT with industry index... you get the idea.
> >
> > I think I am pretty close to an answer to my problem, thanks to
you and to
> > the ideas you gave me.  I will try to experiment with Graham
formula but I
> > am still not sure yet how it is suppose to work and what is the
purpose of
> > it.
> >
> > Thanks!
> >
> > Louis
> >
> >
> >
> > 2008/2/16, Steve Dugas <sjdugas@xxx>:
> > >
> > >    Louis - Let's start at the beginning -
> > >
> > > 1. Who is your data provider? Different providers can use different
> > > industry structures and use different tickers for their industry
indexes.
> > >
> > > 2. Can you give a couple of examples? Give me 3 stock tickers, the
> > > industries they belong to, and the ticker symbols for those
industries..
> > >
> > > To get the info if you don't know it, try running an Exploration
on this
> > > code and sorting on the different columns...
> > >
> > > AddColumn( IndustryID( 0 ), "Industry Number", 1.0 );
> > >  AddTextColumn( IndustryID( 1 ), "Industry Name"  );
> > >
> > >
> > > ----- Original Message -----
> > > *From:* Louis Préfontaine <rockprog80@xxx>
> > > *To:* amibroker@xxxxxxxxxxxxxxx
> > >  *Sent:* Saturday, February 16, 2008 8:03 PM
> > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
industry and
> > > market ...
> > >
> > > Hi,
> > >
> > > I don't understand what Graham posted to be honest... I 'd need some
> > > examples I think.
> > >
> > > I don't understand the
> > >
> > > SectorIndex = "^XYZ"; // default if not specified below
> > > if(sectorID()==1) SectorIndex = "^ABCD";
> > > if(sectorID()==2) SectorIndex = "^EFGH";
> > > etc
> > >
> > > part at all.  Hmm..  What does the 1 or 2 stand for?  How to use the
> > > sectorid thing?  I don't understand this, even after looking at
the "manual"
> > > (which should have more examples)
> > >
> > > Really, I think I must confuse everyone with this.  This is very
very
> > > simple, really more simple than what everyone seems to think.
> > >
> > > What you told me was a good start Steve.  What I'd need now is a
way to
> > > use the foreign command to get the industry index I chose for
each stock.
> > >
> > > Thanks,
> > >
> > > Louis
> > >
> > >
> > >
> > > 2008/2/16, Steve Dugas <sjdugas@xxx>:
> > > >
> > > >    See the code Graham just posted.   IndustryID() function
works for
> > > > industries same way that SectorID() function works for
sectors. There is
> > > > also a MarketID() function for markets...
> > > >
> > > > ----- Original Message -----
> > > > *From:* Louis Préfontaine <rockprog80@xxx>
> > > > *To:* amibroker@xxxxxxxxxxxxxxx
> > > > *Sent:* Saturday, February 16, 2008 7:24 PM
> > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
industry and
> > > > market ...
> > > >
> > > > Hi Steve,
> > > >
> > > > Thanks for this information; at least I understand partly now
how the
> > > > getbaseindex works...
> > > >
> > > > Is there any way to get the other things.. I mean: how do you
use the
> > > > foreign command to get the industry (considering that I did
use getbaseindex
> > > > for market)?  I looked at your previous message but I was not
sure.  Is it
> > > > possible to write something like "foreign (IndustryID, "C")"?
 How to get
> > > > that second information?
> > > >
> > > > Thanks!!
> > > >
> > > > Louis
> > > >
> > > > 2008/2/16, Steve Dugas <sjdugas@xxx>:
> > > > >
> > > > >    Louis - you can only use BaseIndex() for *one* category - you
> > > > > must choose either groups, industries, sectors or markets.
Then you must
> > > > > find another method to get the other things. That is what my
codes do. Here
> > > > > is TJ's answer to a question that I asked him years ago...
> > > > >
> > > > >
> > > > >
> > > > >  Steve,
> > > > >
> > > > > The order in which AmiBroker looks up for base index is:
> > > > > Group
> > > > > Industry
> > > > > Market
> > > > > Preferences
> > > > >
> > > > > (the first found is used, so in your case Industry setting
will take
> > > > > precedence)
> > > > >
> > > > > Best regards,
> > > > > Tomasz Janeczko
> > > > > amibroker.com
> > > > >
> > > > > ----- Original Message -----
> > > > > *From:* Steve Dugas <sjdugas@xxx>
> > > > > *To:* amibroker@xxxxxxxxxxxxxxx
> > > > > *Sent:* Saturday, September 07, 2002 6:41 AM
> > > > > *Subject:* [amibroker] TJ - base indexes
> > > > >
> > > > > Hi,
> > > > >
> > > > > What happens if I set up Base Indexes for industries and
also for
> > > > > markets?
> > > > >
> > > > > I have already set up the Base Indexes for my indusries, so
now, for
> > > > > example, if I am viewing an Auto Parts stock, AB
automatically uses the Auto
> > > > > Parts index to calculate RelStrength. If I now set up Base
Indexes for
> > > > > my markets, which one will be used in the calculation, , the
industry index
> > > > > or the market index? Sorry to ask before trying it, but I
have discovered
> > > > > that AB will not let me blank out these fields after filling
them in - or is
> > > > > there something special that I need to do?. Thanks very much!
> > > > >
> > > > > Steve
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >  ----- Original Message -----
> > > > > *From:* Louis Préfontaine <rockprog80@xxx>
> > > > > *To:* amibroker@xxxxxxxxxxxxxxx
> > > > >  *Sent:* Saturday, February 16, 2008 6:43 PM
> > > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
industry
> > > > > and market ...
> > > > >
> > > > > Hi,
> > > > >
> > > > > In fact, I want to use baseindex both for market and
industry.  I
> > > > > really have trouble explaining what I need.  I thought it
was clear but
> > > > > maybe I just don't know how to say it.  I will try again.
> > > > >
> > > > > I need BOTH market index and industry index.
> > > > >
> > > > > You are right; I want to assign the industry/sector stock by
stock.
> > > > > It is very long, but once it is done it is done.
> > > > >
> > > > > So, basically, what I need is very very very simple: I want
to be
> > > > > able to assign a variable for the base index and another
variable
> > > > > for the industry index.  That's it.  Really, I just can't
explain it in any
> > > > > other way.  If someone could simply tell me what is the
correct 2 lines code
> > > > > for that  (e.g. Foreign (IndustryID, "C") etc.) and that's ll be
> > > > > allright!  I am sure there is someone out there who knows
how to do this!
> > > > >
> > > > > This is really not complicated:
> > > > >
> > > > > variable a = (market index)
> > > > > variable b = (industry index)
> > > > >
> > > > > Considering I already entered the specific indexes for each
stock by
> > > > > clicking on the stock and clicking "information" and
choosing the right
> > > > > category for each stock.
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Louis
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > 2008/2/16, Steve Dugas <sjdugas@xxx>:
> > > > > >
> > > > > >    Louis - I think what you may want to do is use BaseIndex to
> > > > > > assign the industry, since there are lots of them. It
takes an hour or so to
> > > > > > set it up but works great afterwards. Then you can use
other AFL like
> > > > > > Foreign(), etc for simpler task of retrieving Sector,
Market, etc.  I don't
> > > > > > know who your data provider is but I wrote some code a few
years ago that
> > > > > > does what you want for TC2K data, which you may find
helpful. To get the
> > > > > > code, go to the AmiBroker-AFL Yahoo group, files section,
Steve Dugas
> > > > > > folder,  download Relative Performance.zip and look
through the
> > > > > > codes. It has been a few years, but I will try to help if
you have questions
> > > > > > about the codes.
> > > > > >
> > > > > > Steve
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > *From:* Louis Préfontaine <rockprog80@xxx>
> > > > > >  *To:* amibroker@xxxxxxxxxxxxxxx
> > > > > > *Sent:* Friday, February 15, 2008 8:12 PM
> > > > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
industry
> > > > > > and market ...
> > > > > >
> > > > > > Hi Brian,
> > > > > >
> > > > > > Thank you for your help.  There was some confusion with my
> > > > > > messages.  As I said earlier, english is not my first
language so maybe I
> > > > > > was not clear enough.  What I want to do is the same thing
from the start:
> > > > > > find a way to assign a variable that will give me me the
sector or industry
> > > > > > index, like I am already able to do with the base index.
> > > > > >
> > > > > > Right now,  I can double-click on the stock, and enter
indu.x for
> > > > > > the base index, and let's say xau.x for the industry
index, but
> > > > > > whatever I do, I just can't use that industry index.  I
need to manually
> > > > > > enter "foreign ("xau.x, "c")"  which is not good because I
want to
> > > > > > build a system based on that on which I would be able to
assign a variable
> > > > > > for the base index AND a variable for the industry index.
> > > > > >
> > > > > > I just need to understand how to make it possible.  When I
use the
> > > > > > "getbaseindex" I can only get the market index (indu.x,
comp.x,
> > > > > > etc.); I would like to know how to get the industry index
or the sector
> > > > > > index which I already entered at the correct place.
> > > > > >
> > > > > > I am really sorry if I made your head spin with this.  I
thought I
> > > > > > explaine the problem correctly at first, but now I realize
that it wasn't
> > > > > > all that clear!
> > > > > >
> > > > > > Thanks for your help!
> > > > > >
> > > > > > Louis
> > > > > >
> > > > > > 2008/2/15, brian_z111 <brian_z111@xxx>:
> > > > > > >
> > > > > > >   Louis,
> > > > > > >
> > > > > > > The problem is you started out wanting to plot three
symbols in
> > > > > > > one
> > > > > > > chart, then you wanted to make it automatic (based on
the stock
> > > > > > > chosen) and now you want to manipulate variables as well.
> > > > > > >
> > > > > > > When people started to answer one of those questions you
didn't
> > > > > > > go
> > > > > > > with them.
> > > > > > >
> > > > > > > Also, you are trying to do complex things without
outstanding
> > > > > > > the
> > > > > > > basics. I am not really a coder. I only get things done
because
> > > > > > > I try
> > > > > > > to understand the basics and keep it simple.
> > > > > > >
> > > > > > > I don't know where to start to try to help you because
you are
> > > > > > > making
> > > > > > > my head spin.
> > > > > > >
> > > > > > > I can try to help you with the first part - at least you
will
> > > > > > > see
> > > > > > > three symbols plotted in one chart to get a feel for
what you
> > > > > > > are
> > > > > > > trying to do.
> > > > > > >
> > > > > > > Perhaps you have already done this but I'm doing it for my
> > > > > > > benefit (I
> > > > > > > am trying to find your starting line).
> > > > > > >
> > > > > > > Using three symbols from Yahoo as the example - ^OEX for the
> > > > > > > market,
> > > > > > > ^XAU for the gold index and ABX Barrick GoldCorp as the
stock.
> > > > > > >
> > > > > > > 1) Make ^OEX the current chart.
> > > > > > > 2) Go to Charts >> Basic >> RelativePerformance and
double click
> > > > > > > on
> > > > > > > it.
> > > > > > > 3) Enter ^XAU and ABX in the parameters input box that
opens OR
> > > > > > > right
> > > > > > > click in the chart and select parameters to do enter the
> > > > > > > symbols.
> > > > > > >
> > > > > > > If you right click inside the chart and select Edit
Formula you
> > > > > > > can
> > > > > > > see the code Tomasz used to create the chart.
> > > > > > >
> > > > > > > First yoy need to understand how he made the plots
relative to
> > > > > > > each
> > > > > > > other by standardizing to the close value on the first bar.
> > > > > > >
> > > > > > > Then you could do three symbol charts yourself by using
> > > > > > > plotforeign
> > > > > > > twice and adding code to find the first bar close then
> > > > > > > calculating
> > > > > > > and plotting them relative to the first bar close of one of
> > > > > > > them.
> > > > > > >
> > > > > > > If you are OK with that someone might be around to help
you with
> > > > > > > step
> > > > > > > 2 (Patrick already showed one promising way in).
> > > > > > >
> > > > > > > Theres always more than one way to do things.
> > > > > > >
> > > > > > > brian_z
> > > > > > >
> > > > > > > brian_z
> > > > > > >
> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx
<amibroker%40yahoogroups.com>,
> > > > > > > "Louis Préfontaine"
> > > > > > > <rockprog80@> wrote:
> > > > > > > >
> > > > > > > > Hi Brian,
> > > > > > > >
> > > > > > > > I am already able to compare one stock with one base
index;
> > > > > > > the
> > > > > > > only thing I
> > > > > > > > can't do is add the industry or sector index to that.
> > > > > > > >
> > > > > > > > I already have a variable for the stock and for the index.
> > > > > > > >
> > > > > > > > //fc is for the index
> > > > > > > >
> > > > > > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> > > > > > > > Current= ( 100 * ( C - Ref (Close, -10) ) / Ref
(Close, -10))
> > > > > > > ;à
> > > > > > > >
> > > > > > > > Basically, all I want is to add a third variable which
would
> > > > > > > take
> > > > > > > the
> > > > > > > > industryID or sectorID so I would be able to add it to the
> > > > > > > package.
> > > > > > > >
> > > > > > > > You are right; if I was more fluent in English
probably the
> > > > > > > first
> > > > > > > time
> > > > > > > > everyone would have said "ahah!" and you would have
understood
> > > > > > > then
> > > > > > > how easy
> > > > > > > > it should be for people who know how AFL works. I am
sure this
> > > > > > > is
> > > > > > > easy; I
> > > > > > > > just don't get it...yet!
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > > > Louis
> > > > > > > >
> > > > > > > >
> > > > > > > > 2008/2/15, brian_z111 <brian_z111@>:
> > > > > > > > >
> > > > > > > > > Hello Louis,
> > > > > > > > >
> > > > > > > > > Understandably language makes it harder - just like
when I
> > > > > > > was in
> > > > > > > > > France.
> > > > > > > > >
> > > > > > > > > The main problem I think is that you are mixing two
ideas
> > > > > > > and the
> > > > > > > > > second one is a little more complex. Also you are
switching
> > > > > > > between
> > > > > > > > > them so it makes it harder for people to follow.
> > > > > > > > >
> > > > > > > > > 1) You want to plot, for example, S&P500 (Market), ^XAU
> > > > > > > (Gold
> > > > > > > Index)
> > > > > > > > > and ABX (stock e.g. Barrick Gold) on one chart for
> > > > > > > comparison.
> > > > > > > > >
> > > > > > > > > 2) When you plot the stock you want the
corresponding Index
> > > > > > > and
> > > > > > > > > Stock to Market to automatically plot.
> > > > > > > > >
> > > > > > > > > Is that correct?
> > > > > > > > >
> > > > > > > > > If so - can you do step 1?
> > > > > > > > >
> > > > > > > > > I think Bill gave you a workable answer for step 1?
> > > > > > > > >
> > > > > > > > > Yes,step2 can be done - probably a few ways but
maybe the
> > > > > > > forum
> > > > > > > won't
> > > > > > > > > come up with the super deluxe version - I don't know.
> > > > > > > > >
> > > > > > > > > Also - you must have seen these.
> > > > > > > > >
> > > > > > > > > http://www.amibroker.com/guide/afl/afl_view.php?id=96
> > > > > > > > >
> > > > > > > > > http://www.amibroker.com/guide/afl/afl_view.php?id=134
> > > > > > > > >
> > > > > > > > > I don't know if I will try step 2 or not.
> > > > > > > > >
> > > > > > > > > brian_z
> > > > > > > > >
> > > > > > > > > --- In
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%40yahoogroups.com>,
> > > > > > > > > "louisprefontaine" <rockprog80@>
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Anyone can help me?
> > > > > > > > > >
> > > > > > > > > > Yhis should not be complicated for someone who
knows AFL
> > > > > > > more
> > > > > > > than
> > > > > > > > > me.
> > > > > > > > > >
> > > > > > > > > > I am looking for:
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > variablea = //get the marketID
> > > > > > > > > > variableb = //get the industryID
> > > > > > > > > >
> > > > > > > > > > That's about it.
> > > > > > > > > >
> > > > > > > > > > Thanks,
> > > > > > > > > >
> > > > > > > > > > Louis
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --- In
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com>, "Louis
> > > > > > > > > Préfontaine" <rockprog80@>
> > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > Hmm... Maybe I am not clear enough, or what I am
saying
> > > > > > > is
> > > > > > > > > confusing. I
> > > > > > > > > > > will try to explain it another way.
> > > > > > > > > > >
> > > > > > > > > > > Right now when I choose a stock, I can decide the
> > > > > > > market, the
> > > > > > > > > > industry, and
> > > > > > > > > > > the sector. As an example, AA is in the NYSE and
I chose
> > > > > > > the
> > > > > > > > > composite
> > > > > > > > > > > index indu.x for that market. And YHOO is in the
Nasdaq
> > > > > > > and I
> > > > > > > > > chose
> > > > > > > > > > > comp.xfor the Nasdaq. I have absolutely no problem
> > > > > > > getting
> > > > > > > those
> > > > > > > > > > > index and do
> > > > > > > > > > > whatever I need I have to do with them. My
problem is
> > > > > > > that I
> > > > > > > > > can't
> > > > > > > > > > get the
> > > > > > > > > > > industry or sector index. Per example, AEM is in
NYSE
> > > > > > > but I
> > > > > > > want
> > > > > > > > > to
> > > > > > > > > > compare
> > > > > > > > > > > DJI with GLD along with the stock. Right now I
can't do
> > > > > > > it. I
> > > > > > > > > can
> > > > > > > > > > get the
> > > > > > > > > > > base market index, but not the industry index.
> > > > > > > > > > >
> > > > > > > > > > > I already wrote this code
> > > > > > > > > > >
> > > > > > > > > > > Ticker = GetBaseIndex(); // plot industry, need to
> > > > > > > create
> > > > > > > > > composite
> > > > > > > > > > > sectors
> > > > > > > > > > >
> > > > > > > > > > > TickerName = IndustryID(1);
> > > > > > > > > > >
> > > > > > > > > > > TickerClose = Foreign( Ticker, "close" );
> > > > > > > > > > >
> > > > > > > > > > > for( i = 0; ( symbol = StrExtract( Ticker, i ) )
!= "";
> > > > > > > i++ )
> > > > > > > > > > > {
> > > > > > > > > > > fc = Foreign( ticker, "C" );
> > > > > > > > > > > }
> > > > > > > > > > >
> > > > > > > > > > > PlotGrid( 0, colorYellow );
> > > > > > > > > > >
> > > > > > > > > > > _N( Title = "{{NAME}} - Relative Performance [%]:
> > > > > > > {{VALUES}}" );
> > > > > > > > > > >
> > > > > > > > > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref
(fc,-10)) ;
> > > > > > > > > > > Current= ( 100 * ( C - Ref (Close, -10) ) / Ref
(Close,
> > > > > > > -
> > > > > > > 10)) ;
> > > > > > > > > > >
> > > > > > > > > > > and what I need is a way to get a variable
(let's say
> > > > > > > fc1...
> > > > > > > or
> > > > > > > > > ticker1)
> > > > > > > > > > > that would represent the sector/industry index
already
> > > > > > > linked
> > > > > > > to
> > > > > > > > > the
> > > > > > > > > > stock.
> > > > > > > > > > > So all I need is a way to get to that
industry/sector
> > > > > > > index
> > > > > > > to be
> > > > > > > > > > able to
> > > > > > > > > > > assign it to a variable and then use that
variable and
> > > > > > > write,
> > > > > > > as
> > > > > > > > > an
> > > > > > > > > > example:
> > > > > > > > > > >
> > > > > > > > > > > ticker1= ( 100 * ( fc1 - Ref( fc1, -10 ))/Ref
(fc1,-10))
> > > > > > > ;
> > > > > > > > > > >
> > > > > > > > > > > I don't understand how to get both the market
index and
> > > > > > > the
> > > > > > > > > > sector/industry
> > > > > > > > > > > index.
> > > > > > > > > > >
> > > > > > > > > > > Thank you very much for helping me with this
issue. I am
> > > > > > > still
> > > > > > > > > learning
> > > > > > > > > > > (got a long way to go) but reading you guys sure
helps
> > > > > > > me.
> > > > > > > > > > >
> > > > > > > > > > > Louis
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > 2008/2/13, gmorlosky <gmorlosky@>:
> > > > > > > > > > > >
> > > > > > > > > > > > Maybe this will help:
> > > > > > > > > > > >
> > > > > > > > > > > > // AccuTrack Compares performance of two
securities
> > > > > > > > > > > > // The basic idea is to switch between the two
> > > > > > > securities
> > > > > > > > > > > > // AccuTrack was developed by FastTrack
> > > > > > > (http://fasttrack.net)
> > > > > > > > > > > >
> > > > > > > > > > > > // Following is the Indicator Builder Formula
> > > > > > > > > > > >
> > > > > > > > > > > > fnd = Name();
> > > > > > > > > > > > ind = "FDRXX"; // FDRXX is money market fund,
so the
> > > > > > > comparison
> > > > > > > > > > > > is done with cash.
> > > > > > > > > > > > fund = Foreign(fnd, "Close");
> > > > > > > > > > > > index = Foreign(ind, "Close");
> > > > > > > > > > > >
> > > > > > > > > > > > fast = 6;
> > > > > > > > > > > > slow = 24;
> > > > > > > > > > > > RawAT = EMA((EMA(ROC(fund,1), slow) - EMA(ROC
> > > > > > > > > (index,1),slow)),fast);
> > > > > > > > > > > > tradeAccuTrack = RawAT * 265;
> > > > > > > > > > > > Plot(tradeAccuTrack, "tradeAccuTrack", colorBlue,
> > > > > > > styleLine);
> > > > > > > > > > > >
> > > > > > > > > > > > Title = Date()
> > > > > > > > > > > > + " Trade AccuTrack of "
> > > > > > > > > > > > + fnd
> > > > > > > > > > > > +" / "
> > > > > > > > > > > > + ind
> > > > > > > > > > > > + " = " + WriteVal(tradeAccuTrack, 1.2) + " ";
> > > > > > > > > > > >
> > > > > > > > > > > > GraphXSpace = 2;
> > > > > > > > > > > >
> > > > > > > > > > > > --- In
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%
> > > > > > > > > 40yahoogroups.com>, "Louis
> > > > > > > > > > > > Préfontaine"
> > > > > > > > > > > > <rockprog80@> wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > >
> > > > > > > > > > > > > I thought about this, but I want something more
> > > > > > > systemic.. I
> > > > > > > > > mean:
> > > > > > > > > > > > I want to
> > > > > > > > > > > > > build indicators based on that so I don't
want to
> > > > > > > have to
> > > > > > > > > change
> > > > > > > > > > > > the indexes
> > > > > > > > > > > > > manually each time. I would like to have
thev base
> > > > > > > index +
> > > > > > > > > > > > industry/sector
> > > > > > > > > > > > > index automatically for each stock...
> > > > > > > > > > > > >
> > > > > > > > > > > > > Sorry if I am not clear enough; english is
not my
> > > > > > > first
> > > > > > > > > language.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Thanks for your help!
> > > > > > > > > > > > >
> > > > > > > > > > > > > Louis
> > > > > > > > > > > > >
> > > > > > > > > > > > > 2008/2/13, wavemechanic <timesarrow@>:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > *If I understand correctly, how about
something
> > > > > > > along
> > > > > > > the
> > > > > > > > > > > > lines of the
> > > > > > > > > > > > > > following for the visible bars using
paramstr()
> > > > > > > (don't
> > > > > > > > > think I
> > > > > > > > > > > > left anything
> > > > > > > > > > > > > > out but modify to do what you want):*
> > > > > > > > > > > > > > **
> > > > > > > > > > > > > > *status("barvisible"); //all have to have
at least
> > > > > > > as
> > > > > > > many
> > > > > > > > > bars
> > > > > > > > > > > > as base or
> > > > > > > > > > > > > > reduce time (# bars)*
> > > > > > > > > > > > > > *firstvisbar = status("firstvisiblebar");*
> > > > > > > > > > > > > > *list = paramstr("list", ^xau, ^gld, nem,
... );*
> > > > > > > > > > > > > > *plot(100 * (c -
c[firstvisbar])/c[firstvisbar],
> > > > > > > name(),
> > > > > > > > > > > > colorwhite);*
> > > > > > > > > > > > > > *for(i = 0, (symbol = strextract(list, i)
!= "",
> > > > > > > i++)*
> > > > > > > > > > > > > > *{*
> > > > > > > > > > > > > > * forsym = foreign(symbol, "C");*
> > > > > > > > > > > > > > * if(! isnull(forsym[0]))*
> > > > > > > > > > > > > > * {*
> > > > > > > > > > > > > > * plot(100 * (forsym -
forsym[firstvisbar]) .....
> > > > > > > *
> > > > > > > > > > > > > > * }*
> > > > > > > > > > > > > > *}*
> > > > > > > > > > > > > > **
> > > > > > > > > > > > > > *Bill*
> > > > > > > > > > > > > > **
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > **
> > > > > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > **
> > > > > > > > > > > > > > *From:* Louis Préfontaine <rockprog80@>
> > > > > > > > > > > > > > *To:*
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%
> > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > *Sent:* Wednesday, February 13, 2008 11:44 AM
> > > > > > > > > > > > > > *Subject:* Re: [amibroker] Re: Trouble
trying to
> > > > > > > compare
> > > > > > > > > industry
> > > > > > > > > > > > and
> > > > > > > > > > > > > > market ...
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I am using DTN.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Whatever the other source, that was only an
> > > > > > > example. I
> > > > > > > want
> > > > > > > > > to
> > > > > > > > > > > > compare a
> > > > > > > > > > > > > > base index (Dow Jones, Nasdaq, etc.) with a
> > > > > > > sector/industry
> > > > > > > > > index
> > > > > > > > > > > > (XAU, GLD,
> > > > > > > > > > > > > > etc.) and with the actual stock.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I am already able to compare the stock
with the
> > > > > > > base
> > > > > > > index
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > (with the following formla:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Ticker = GetBaseIndex(); // plot industry,
need to
> > > > > > >
> > > > > > > create
> > > > > > > > > > > > composite
> > > > > > > > > > > > > > sectors
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > TickerName = IndustryID(1);
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > TickerClose = Foreign( Ticker, "close" );
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > for( i = 0; ( symbol = StrExtract( Ticker,
i ) )
> > > > > > > != "";
> > > > > > > > > i++ )
> > > > > > > > > > > > > > {
> > > > > > > > > > > > > > fc = Foreign( ticker, "C" );
> > > > > > > > > > > > > > }
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > PlotGrid( 0, colorYellow );
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > _N( Title = "{{NAME}} - Relative
Performance [%]:
> > > > > > > > > {{VALUES}}" );
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref
> > > > > > > (fc,-10)) ;
> > > > > > > > > > > > > > Current= ( 100 * ( C - Ref (Close, -10) )
/ Ref
> > > > > > > (Close, -
> > > > > > > > > 10)) ;
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > )
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > but for some reasons I just don't know how
to add
> > > > > > > a
> > > > > > > sector
> > > > > > > > > index
> > > > > > > > > > > > to the
> > > > > > > > > > > > > > thing so I can get a third graph...
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Louis
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 2008/2/13, dingo <dingo@>:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > what data source are you using?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > d
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > ------------------------------
> > > > > > > > > > > > > > > *From:*
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com>
> > > > > > > <amibroker%
> > > > > > > 40yahoogroups.com><amibroker%
> > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > >
[mailto:amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%
> > > > > > > > > 40yahoogroups.com>] *On
> > > > > > > > > > > > > > > Behalf Of *Louis Préfontaine
> > > > > > > > > > > > > > > *Sent:* Wednesday, February 13, 2008
11:19 AM
> > > > > > > > > > > > > > > *To:*
amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%
> > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > > > > *Subject:* Re: [amibroker] Re: Trouble
trying to
> > > > > > >
> > > > > > > compare
> > > > > > > > > > > > industry and
> > > > > > > > > > > > > > > market ...
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Thanks for your help!
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I scanned the whole user guide but I
think I am
> > > > > > > missing
> > > > > > > > > some
> > > > > > > > > > > > insight on
> > > > > > > > > > > > > > > this. The guide explains how to use the
> > > > > > > relativestrength
> > > > > > > > > or
> > > > > > > > > > > > foreign, but I
> > > > > > > > > > > > > > > just didn't see any example how to actually
> > > > > > > assign a
> > > > > > > > > variable
> > > > > > > > > > > > for BOTH the
> > > > > > > > > > > > > > > marketid and the industry or sector. I
have no
> > > > > > > trouble
> > > > > > > > > > > > assigning a variable
> > > > > > > > > > > > > > > to the base index, but I just can't use both
> > > > > > > > > industry/sector
> > > > > > > > > > > > and base index
> > > > > > > > > > > > > > > at the same time. That's why I was
wondering if
> > > > > > > anybody
> > > > > > > > > knew
> > > > > > > > > > > > how to do this
> > > > > > > > > > > > > > > and could show me an example of how to
do it.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Thanks!
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Louis
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > 2008/2/13, wavemechanic <timesarrow@>:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > *The Users Guide and Library might provide
> > > > > > > some
> > > > > > > help.
> > > > > > > > > For
> > > > > > > > > > > > example:
> > > > > > > > > > > > > > > > *
> > > > > > > > > > > > > > > > **
> > > > > > > > > > > > > > > > *
> > > > > > > http://www.amibroker.com/guide/afl/afl_view.php?
> > > > > > > id=123*
> > > > > > > > > > > > > > > > **
> > > > > > > > > > > > > > > > *
> > > > > > > http://www.amibroker.com/library/detail.php?id=294*
> > > > > > > > > > > > > > > > **
> > > > > > > > > > > > > > > > *Bill*
> > > > > > > > > > > > > > > > **
> > > > > > > > > > > > > > > > **
> > > > > > > > > > > > > > > > *----- Original Message ----- *
> > > > > > > > > *From: "louisprefontaine" <**
> > > > > > > > > > > > > > > > rockprog80@* <rockprog80@>*>*
> > > > > > > > > > > > > > > > *To:
> > > > > > > > > >
<**amibroker@xxxxxxxxxxxxxxx<%2A%2Aamibroker%40yahoogroups.com><%2A%2Aamibroker%40yahoogroups.com>
> > > > > > > > > <%2A%2Aamibroker%40yahoogroups.com>*
> > > > > > > > > > > >
> > > > > > > > > > > >
<amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%40yahoogroups.com>>*>*
> > > > > > > > > > > > > > > > *Sent: Wednesday, February 13, 2008
10:55 AM*
> > > > > > > > > > > > > > > > *Subject: [amibroker] Re: Trouble
trying to
> > > > > > > compare
> > > > > > > > > industry
> > > > > > > > > > > > and
> > > > > > > > > > > > > > > > market ...*
> > > > > > > > > > > > > > > > *
> > > > > > > > > > > > > > > > *
> > > > > > > > > > > > > > > > *> Maybe my last message was not
clear, so I
> > > > > > > will
> > > > > > > try to
> > > > > > > > > > > > explain
> > > > > > > > > > > > > > > > better.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > I know how to use the getbaseindex()
to get
> > > > > > > the
> > > > > > > base
> > > > > > > > > index
> > > > > > > > > > > > (DJ, or
> > > > > > > > > > > > > > > > > comp, etc.) for each of the stocks,
and to
> > > > > > > apply a
> > > > > > > > > formula
> > > > > > > > > > > > on that
> > > > > > > > > > > > > > > > > index. But what I really want to do
is to
> > > > > > > get
> > > > > > > BOTH the
> > > > > > > > > > > > base index
> > > > > > > > > > > > > > > > for
> > > > > > > > > > > > > > > > > the stock AND the industry or sector
index,
> > > > > > > as to
> > > > > > > > > compare
> > > > > > > > > > > > the
> > > > > > > > > > > > > > > > > industry/sector index with the base
index
> > > > > > > and
> > > > > > > with the
> > > > > > > > > > > > stock. I am
> > > > > > > > > > > > > > > > > looking for 3 informations there to
compare
> > > > > > > one to
> > > > > > > > > each
> > > > > > > > > > > > other.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > If anyone could help me with this issue,
> > > > > > > maybe by
> > > > > > > > > telling
> > > > > > > > > > > > me how I
> > > > > > > > > > > > > > > > > could write such code to get both
index and
> > > > > > > industry
> > > > > > > > > or
> > > > > > > > > > > > sector, I
> > > > > > > > > > > > > > > > > would greatly appreciate.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > I tried to search through all the
> > > > > > > information in
> > > > > > > the
> > > > > > > > > group
> > > > > > > > > > > > in the
> > > > > > > > > > > > > > > > last
> > > > > > > > > > > > > > > > > years, but found no answer to my
question.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Thank you very much!
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Louis
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > --- In
> > > > > > > > > >
**amibroker@xxxxxxxxxxxxxxx<%2A%2Aamibroker%40yahoogroups.com><%2A%2Aamibroker%40yahoogroups.com>
> > > > > > > > > <%2A%2Aamibroker%40yahoogroups.com>*
> > > > > > > > > > > >
> > > > > > > > > > > >
<amibroker@xxxxxxxxxxxxxxx<amibroker%40yahoogroups.com><amibroker%
> > > > > > > 40yahoogroups.com><amibroker%40yahoogroups.com>>
> > > > > > > > > > > > > > > > *, "louisprefontaine" <rockprog80@>* *
> > > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> Hi,
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> I am a newbie with Amibroker as
well as on
> > > > > > > this
> > > > > > > > > board, but
> > > > > > > > > > > > I have
> > > > > > > > > > > > > > > > some
> > > > > > > > > > > > > > > > >> talent for learning and am trying
to learn
> > > > > > > to
> > > > > > > write
> > > > > > > > > code
> > > > > > > > > > > > really
> > > > > > > > > > > > > > > > hard.
> > > > > > > > > > > > > > > > >> So far, I had no problem that did
not have
> > > > > > > a
> > > > > > > > > solution.
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> But now this is something that I don't
> > > > > > > understand. I
> > > > > > > > > want
> > > > > > > > > > > > to
> > > > > > > > > > > > > > > > compare
> > > > > > > > > > > > > > > > >> a market indicator (such as the Dow
Jones)
> > > > > > > and a
> > > > > > > > > sector
> > > > > > > > > > > > indicator
> > > > > > > > > > > > > > > > >> (such as the mining index).
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> Here is the code I wrote so far (I know
> > > > > > > it's
> > > > > > > messy;
> > > > > > > > > I'm
> > > > > > > > > > > > still
> > > > > > > > > > > > > > > > learning)
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > ----------------------------------------------------
> > > > > > > ----
> > > > > > > > > --
> > > > > > > > > > > >
> > > > > > > ----------------------------------------------------------
> > > > > > > > > > > > --------------------------------------------
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> Ticker = GetBaseIndex(); // plot
industry,
> > > > > > > need
> > > > > > > to
> > > > > > > > > create
> > > > > > > > > > > > composite
> > > > > > > > > > > > > > > > >> sectors
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> TickerName = IndustryID(1);
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> TickerClose = Foreign( Ticker,
"close" );
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> for( i = 0; ( symbol = StrExtract(
Ticker,
> > > > > > > i ) ) !
> > > > > > > > > = "";
> > > > > > > > > > > > i++ )
> > > > > > > > > > > > > > > > >> {
> > > > > > > > > > > > > > > > >> fc = Foreign( ticker, "C" );
> > > > > > > > > > > > > > > > >> }
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> PlotGrid( 0, colorYellow );
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> _N( Title = "{{NAME}} - Relative
> > > > > > > Performance [%]:
> > > > > > > > > > > > {{VALUES}}" );
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> ticker= ( 100 * ( fc - Ref( fc, -10
))/Ref
> > > > > > > (fc,-
> > > > > > > > > 10)) ;
> > > > > > > > > > > > > > > > >> Current= ( 100 * ( C - Ref (Close,
-10) ) /
> > > > > > > Ref
> > > > > > > > > (Close, -
> > > > > > > > > > > > 10)) ;
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > ----------------------------------------------------
> > > > > > > ----
> > > > > > > > > --
> > > > > > > > > > > >
> > > > > > > ----------------------------------------------------------
> > > > > > > > > > > >
> > > > > > > ----------------------------------------------------------
> > > > > > > > > > > > ------------------
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> Basically, all I want to do is to
add the
> > > > > > > Industry
> > > > > > > > > index
> > > > > > > > > > > > along with
> > > > > > > > > > > > > > > > >> the Market index which is what is
displayed
> > > > > > > right
> > > > > > > > > now.
> > > > > > > > > > > > Anybody
> > > > > > > > > > > > > > > > would
> > > > > > > > > > > > > > > > >> know how to do this? I tried to
experiment
> > > > > > > with
> > > > > > > > > > > > getbaseindex and
> > > > > > > > > > > > > > > > >> industry() and things like that but
I got
> > > > > > > no way
> > > > > > > to
> > > > > > > > > add
> > > > > > > > > > > > both
> > > > > > > > > > > > > > > > >> marketid(0) and industryid (0) in
the same
> > > > > > > piece
> > > > > > > of
> > > > > > > > > code.
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >> Thanks!!
> > > > > > > > > > > > > > > > >>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > *
> > > > > > > > > > > > > > > > *> Please note that this group is for
> > > > > > > discussion
> > > > > > > between
> > > > > > > > > > > > users only.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > To get support from AmiBroker please
send an
> > > > > > > e-
> > > > > > > mail
> > > > > > > > > > > > directly to
> > > > > > > > > > > > > > > > > SUPPORT {at} amibroker.com
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > For NEW RELEASE ANNOUNCEMENTS and
other news
> > > > > > >
> > > > > > > always
> > > > > > > > > check
> > > > > > > > > > > > DEVLOG:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > >
> > > > > > > **http://www.amibroker.com/devlog/*<
> > > > > > > http://www.amibroker.com/devlog/>
> > > > > > > > > > > > > > > > *>
> > > > > > > > > > > > > > > > > For other support material please check
> > > > > > > also:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > >
> > > > > > > **http://www.amibroker.com/support.html*<
> > > > > > > http://www.amibroker.com/supp
> > > > > > > > > > > > ort.html>
> > > > > > > > > > > > > > > > *>
> > > > > > > > > > > > > > > > > Yahoo! Groups Links
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > **mailto:amibroker-
> > > > > > > > > > > >
fullfeatured@xxxxxxxxxxxxxxx<fullfeatured%40yahoogroups.com><fullfeatured%
> > > > > > > 40yahoogroups.com><fullfeatured%40yahoogroups.com>*<
> > > > > > > > > > > >
> > > > > > > > > >
amibroker-fullfeatured@xxxxxxxxxxxxxxx<amibroker-fullfeatured%40yahoogroups.com>
> > > > > > > <amibroker-fullfeatured%
> > > > > > > 40yahoogroups.com>
> > > > > > > > > <amibroker-fullfeatured%
> > > > > > > > > 40yahoogroups.com>
> > > > > > > > > > > > >
> > > > > > > > > > > > > > > > *>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > No virus found in this incoming message.
> > > > > > > > > > > > > > > > > Checked by AVG Free Edition.
> > > > > > > > > > > > > > > > > Version: 7.5.516 / Virus Database:
269.20.4/1275
> > > > > > > -
> > > > > > > > > Release
> > > > > > > > > > > > Date:
> > > > > > > > > > > > > > > > 2/12/2008 3:20 PM
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >*
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > ------------------------------
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > No virus found in this incoming message.
> > > > > > > > > > > > > > Checked by AVG Free Edition.
> > > > > > > > > > > > > > Version: 7.5.516 / Virus Database:
269.20.4/1275 -
> > > > > > >
> > > > > > > Release
> > > > > > > > > Date:
> > > > > > > > > > > > 2/12/2008
> > > > > > > > > > > > > > 3:20 PM
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >   
> >
>




Please note that this group is for discussion between users only.

To get support from AmiBroker please send an e-mail directly to 
SUPPORT {at} amibroker.com

For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/

For other support material please check also:
http://www.amibroker.com/support.html
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/amibroker/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/amibroker/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:amibroker-digest@xxxxxxxxxxxxxxx 
    mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    amibroker-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
Follow-Ups:
- Re: [amibroker] Re: Trouble trying to compare industry and market ...
  - From: Louis Préfontaine
References:
- Re: [amibroker] Re: Trouble trying to compare industry and market ...
  - From: Louis Préfontaine
Prev by Date: Re: [amibroker] Interactive brokers data feed
Next by Date: [amibroker] Fear Greed indicator
Previous by thread: Re: [amibroker] Re: Trouble trying to compare industry and market ...
Next by thread: Re: [amibroker] Re: Trouble trying to compare industry and market ...
Index(es):
- Date
- Thread