Re: [amibroker] Re: Trouble trying to compare industry and market ..., AmiBroker Email List Archive

2008/2/16, Steve Dugas <sjdugas@xxxxxxxxxxx>:

See the code Graham just posted. IndustryID() function works for industries same way that SectorID() function works for sectors. There is also a MarketID() function for markets...

----- Original Message -----

From: Louis Préfontaine

To: amibroker@xxxxxxxxxxxxxxx

Sent: Saturday, February 16, 2008 7:24 PM

Subject: Re: [amibroker] Re: Trouble trying to compare industry and market ...

Hi Steve,

Thanks for this information; at least I understand partly now how the getbaseindex works...

Is there any way to get the other things.. I mean: how do you use the foreign command to get the industry (considering that I did use getbaseindex for market)? I looked at your previous message but I was not sure. Is it possible to write something like "foreign (IndustryID, "C")"? How to get that second information?

Thanks!!

Louis

2008/2/16, Steve Dugas <sjdugas@xxxxxxxxxxx>:

Louis - you can only use BaseIndex() for *one* category - you must choose either groups, industries, sectors or markets. Then you must find another method to get the other things. That is what my codes do. Here is TJ's answer to a question that I asked him years ago...

Steve,

The order in which AmiBroker looks up for base index is:

Group

Industry

Market

Preferences

(the first found is used, so in your case Industry setting will take precedence)

Best regards,
Tomasz Janeczko
amibroker.com

----- Original Message -----

From: Steve Dugas

To: amibroker@xxxxxxxxxxxxxxx

Sent: Saturday, September 07, 2002 6:41 AM

Subject: [amibroker] TJ - base indexes

Hi,

What happens if I set up Base Indexes for industries and also for markets?

I have already set up the Base Indexes for my indusries, so now, for example, if I am viewing an Auto Parts stock, AB automatically uses the Auto Parts index to calculate RelStrength. If I now set up Base Indexes for my markets, which one will be used in the calculation, , the industry index or the market index? Sorry to ask before trying it, but I have discovered that AB will not let me blank out these fields after filling them in - or is there something special that I need to do?. Thanks very much!

Steve

----- Original Message -----

From: Louis Préfontaine

To: amibroker@xxxxxxxxxxxxxxx

Sent: Saturday, February 16, 2008 6:43 PM

Subject: Re: [amibroker] Re: Trouble trying to compare industry and market ...

Hi,

In fact, I want to use baseindex both for market and industry. I really have trouble explaining what I need. I thought it was clear but maybe I just don't know how to say it. I will try again.

I need BOTH market index and industry index.

You are right; I want to assign the industry/sector stock by stock. It is very long, but once it is done it is done.

So, basically, what I need is very very very simple: I want to be able to assign a variable for the base index and another variable for the industry index. That's it. Really, I just can't explain it in any other way. If someone could simply tell me what is the correct 2 lines code for that (e.g. Foreign (IndustryID, "C") etc.) and that's ll be allright! I am sure there is someone out there who knows how to do this!

This is really not complicated:

variable a = (market index)
variable b = (industry index)

Considering I already entered the specific indexes for each stock by clicking on the stock and clicking "information" and choosing the right category for each stock.

Thanks,

Louis

2008/2/16, Steve Dugas <sjdugas@xxxxxxxxxxx>:

Louis - I think what you may want to do is use BaseIndex to assign the industry, since there are lots of them. It takes an hour or so to set it up but works great afterwards. Then you can use other AFL like Foreign(), etc for simpler task of retrieving Sector, Market, etc. I don't know who your data provider is but I wrote some code a few years ago that does what you want for TC2K data, which you may find helpful. To get the code, go to the AmiBroker-AFL Yahoo group, files section, Steve Dugas folder, download Relative Performance.zip and look through the codes. It has been a few years, but I will try to help if you have questions about the codes.

Steve

----- Original Message -----

From: Louis Préfontaine

To: amibroker@xxxxxxxxxxxxxxx

Sent: Friday, February 15, 2008 8:12 PM

Subject: Re: [amibroker] Re: Trouble trying to compare industry and market ...

Hi Brian,

Thank you for your help. There was some confusion with my messages. As I said earlier, english is not my first language so maybe I was not clear enough. What I want to do is the same thing from the start: find a way to assign a variable that will give me me the sector or industry index, like I am already able to do with the base index.

Right now, I can double-click on the stock, and enter indu.x for the base index, and let's say xau.x for the industry index, but whatever I do, I just can't use that industry index. I need to manually enter "foreign ("xau.x, "c")" which is not good because I want to build a system based on that on which I would be able to assign a variable for the base index AND a variable for the industry index.

I just need to understand how to make it possible. When I use the "getbaseindex" I can only get the market index (indu.x, comp.x, etc.); I would like to know how to get the industry index or the sector index which I already entered at the correct place.

I am really sorry if I made your head spin with this. I thought I explaine the problem correctly at first, but now I realize that it wasn't all that clear!

Thanks for your help!

Louis

2008/2/15, brian_z111 <brian_z111@xxxxxxxxx>:

Louis,

The problem is you started out wanting to plot three symbols in one
chart, then you wanted to make it automatic (based on the stock
chosen) and now you want to manipulate variables as well.

When people started to answer one of those questions you didn't go
with them.

Also, you are trying to do complex things without outstanding the
basics. I am not really a coder. I only get things done because I try
to understand the basics and keep it simple.

I don't know where to start to try to help you because you are making
my head spin.

I can try to help you with the first part - at least you will see
three symbols plotted in one chart to get a feel for what you are
trying to do.

Perhaps you have already done this but I'm doing it for my benefit (I
am trying to find your starting line).

Using three symbols from Yahoo as the example - ^OEX for the market,
^XAU for the gold index and ABX Barrick GoldCorp as the stock.

1) Make ^OEX the current chart.
2) Go to Charts >> Basic >> RelativePerformance and double click on
it.
3) Enter ^XAU and ABX in the parameters input box that opens OR right
click in the chart and select parameters to do enter the symbols.

If you right click inside the chart and select Edit Formula you can
see the code Tomasz used to create the chart.

First yoy need to understand how he made the plots relative to each
other by standardizing to the close value on the first bar.

Then you could do three symbol charts yourself by using plotforeign
twice and adding code to find the first bar close then calculating
and plotting them relative to the first bar close of one of them.

If you are OK with that someone might be around to help you with step
2 (Patrick already showed one promising way in).

Theres always more than one way to do things.

brian_z

brian_z

--- In amibroker@xxxxxxxxxxxxxxx, "Louis Préfontaine"
<rockprog80@xxx> wrote:
>
> Hi Brian,
>
> I am already able to compare one stock with one base index; the
only thing I
> can't do is add the industry or sector index to that.
>
> I already have a variable for the stock and for the index.
>
> //fc is for the index
>
> ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -10)) ;à
>
> Basically, all I want is to add a third variable which would take
the
> industryID or sectorID so I would be able to add it to the package.
>
> You are right; if I was more fluent in English probably the first
time
> everyone would have said "ahah!" and you would have understood then
how easy
> it should be for people who know how AFL works. I am sure this is
easy; I
> just don't get it...yet!
>
>
> Thanks!
>
> Louis
>
>
> 2008/2/15, brian_z111 <brian_z111@xxx>:
> >
> > Hello Louis,
> >
> > Understandably language makes it harder - just like when I was in
> > France.
> >
> > The main problem I think is that you are mixing two ideas and the
> > second one is a little more complex. Also you are switching
between
> > them so it makes it harder for people to follow.
> >
> > 1) You want to plot, for example, S&P500 (Market), ^XAU (Gold
Index)
> > and ABX (stock e.g. Barrick Gold) on one chart for comparison.
> >
> > 2) When you plot the stock you want the corresponding Index and
> > Stock to Market to automatically plot.
> >
> > Is that correct?
> >
> > If so - can you do step 1?
> >
> > I think Bill gave you a workable answer for step 1?
> >
> > Yes,step2 can be done - probably a few ways but maybe the forum
won't
> > come up with the super deluxe version - I don't know.
> >
> > Also - you must have seen these.
> >
> > http://www.amibroker.com/guide/afl/afl_view.php?id=96
> >
> > http://www.amibroker.com/guide/afl/afl_view.php?id=134
> >
> > I don't know if I will try step 2 or not.
> >
> > brian_z
> >
> > --- In amibroker@xxxxxxxxxxxxxxx <amibroker%40yahoogroups.com>,
> > "louisprefontaine" <rockprog80@>
> > wrote:
> > >
> > > Anyone can help me?
> > >
> > > Yhis should not be complicated for someone who knows AFL more
than
> > me.
> > >
> > > I am looking for:
> > >
> > >
> > > variablea = //get the marketID
> > > variableb = //get the industryID
> > >
> > > That's about it.
> > >
> > > Thanks,
> > >
> > > Louis
> > >
> > >

> > > --- In amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com>, "Louis
> > Préfontaine" <rockprog80@>
> > > wrote:
> > > >
> > > > Hi,
> > > >
> > > > Hmm... Maybe I am not clear enough, or what I am saying is
> > confusing. I
> > > > will try to explain it another way.
> > > >
> > > > Right now when I choose a stock, I can decide the market, the
> > > industry, and
> > > > the sector. As an example, AA is in the NYSE and I chose the
> > composite
> > > > index indu.x for that market. And YHOO is in the Nasdaq and I
> > chose
> > > > comp.xfor the Nasdaq. I have absolutely no problem getting
those
> > > > index and do
> > > > whatever I need I have to do with them. My problem is that I
> > can't
> > > get the
> > > > industry or sector index. Per example, AEM is in NYSE but I
want
> > to
> > > compare
> > > > DJI with GLD along with the stock. Right now I can't do it. I
> > can
> > > get the
> > > > base market index, but not the industry index.
> > > >
> > > > I already wrote this code
> > > >
> > > > Ticker = GetBaseIndex(); // plot industry, need to create
> > composite
> > > > sectors
> > > >
> > > > TickerName = IndustryID(1);
> > > >
> > > > TickerClose = Foreign( Ticker, "close" );
> > > >
> > > > for( i = 0; ( symbol = StrExtract( Ticker, i ) ) != ""; i++ )
> > > > {
> > > > fc = Foreign( ticker, "C" );
> > > > }
> > > >
> > > > PlotGrid( 0, colorYellow );
> > > >
> > > > _N( Title = "{{NAME}} - Relative Performance [%]:
{{VALUES}}" );
> > > >
> > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> > > > Current= ( 100 * ( C - Ref (Close, -10) ) / Ref (Close, -
10)) ;
> > > >
> > > > and what I need is a way to get a variable (let's say fc1...
or
> > ticker1)
> > > > that would represent the sector/industry index already linked
to
> > the
> > > stock.
> > > > So all I need is a way to get to that industry/sector index
to be
> > > able to
> > > > assign it to a variable and then use that variable and write,
as
> > an
> > > example:
> > > >
> > > > ticker1= ( 100 * ( fc1 - Ref( fc1, -10 ))/Ref (fc1,-10)) ;
> > > >
> > > > I don't understand how to get both the market index and the
> > > sector/industry
> > > > index.
> > > >
> > > > Thank you very much for helping me with this issue. I am still
> > learning
> > > > (got a long way to go) but reading you guys sure helps me.
> > > >
> > > > Louis
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > 2008/2/13, gmorlosky <gmorlosky@>:
> > > > >
> > > > > Maybe this will help:
> > > > >
> > > > > // AccuTrack Compares performance of two securities
> > > > > // The basic idea is to switch between the two securities
> > > > > // AccuTrack was developed by FastTrack
(http://fasttrack.net)
> > > > >
> > > > > // Following is the Indicator Builder Formula
> > > > >
> > > > > fnd = Name();
> > > > > ind = "FDRXX"; // FDRXX is money market fund, so the
comparison
> > > > > is done with cash.
> > > > > fund = Foreign(fnd, "Close");
> > > > > index = Foreign(ind, "Close");
> > > > >
> > > > > fast = 6;
> > > > > slow = 24;
> > > > > RawAT = EMA((EMA(ROC(fund,1), slow) - EMA(ROC
> > (index,1),slow)),fast);
> > > > > tradeAccuTrack = RawAT * 265;
> > > > > Plot(tradeAccuTrack, "tradeAccuTrack", colorBlue,
styleLine);
> > > > >
> > > > > Title = Date()
> > > > > + " Trade AccuTrack of "
> > > > > + fnd
> > > > > +" / "
> > > > > + ind
> > > > > + " = " + WriteVal(tradeAccuTrack, 1.2) + " ";
> > > > >
> > > > > GraphXSpace = 2;
> > > > >
> > > > > --- In amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com><amibroker%

> > 40yahoogroups.com>, "Louis
> > > > > Préfontaine"
> > > > > <rockprog80@> wrote:
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I thought about this, but I want something more
systemic.. I
> > mean:
> > > > > I want to
> > > > > > build indicators based on that so I don't want to have to
> > change
> > > > > the indexes
> > > > > > manually each time. I would like to have thev base index +
> > > > > industry/sector
> > > > > > index automatically for each stock...
> > > > > >
> > > > > > Sorry if I am not clear enough; english is not my first
> > language.
> > > > > >
> > > > > > Thanks for your help!
> > > > > >
> > > > > > Louis
> > > > > >
> > > > > > 2008/2/13, wavemechanic <timesarrow@>:
> > > > > > >
> > > > > > > *If I understand correctly, how about something along
the
> > > > > lines of the
> > > > > > > following for the visible bars using paramstr() (don't
> > think I
> > > > > left anything
> > > > > > > out but modify to do what you want):*
> > > > > > > **
> > > > > > > *status("barvisible"); //all have to have at least as
many
> > bars
> > > > > as base or
> > > > > > > reduce time (# bars)*
> > > > > > > *firstvisbar = status("firstvisiblebar");*
> > > > > > > *list = paramstr("list", ^xau, ^gld, nem, ... );*
> > > > > > > *plot(100 * (c - c[firstvisbar])/c[firstvisbar], name(),
> > > > > colorwhite);*
> > > > > > > *for(i = 0, (symbol = strextract(list, i) != "", i++)*
> > > > > > > *{*
> > > > > > > * forsym = foreign(symbol, "C");*
> > > > > > > * if(! isnull(forsym[0]))*
> > > > > > > * {*
> > > > > > > * plot(100 * (forsym - forsym[firstvisbar]) ..... *
> > > > > > > * }*
> > > > > > > *}*
> > > > > > > **
> > > > > > > *Bill*
> > > > > > > **
> > > > > > >
> > > > > > > **
> > > > > > > ----- Original Message -----
> > > > > > >
> > > > > > > **
> > > > > > > *From:* Louis Préfontaine <rockprog80@>
> > > > > > > *To:* amibroker@xxxxxxxxxxxxxxx <amibroker%

40yahoogroups.com><amibroker%
> > 40yahoogroups.com>
> > > > > > > *Sent:* Wednesday, February 13, 2008 11:44 AM
> > > > > > > *Subject:* Re: [amibroker] Re: Trouble trying to compare
> > industry
> > > > > and
> > > > > > > market ...
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I am using DTN.
> > > > > > >
> > > > > > > Whatever the other source, that was only an example. I
want
> > to
> > > > > compare a
> > > > > > > base index (Dow Jones, Nasdaq, etc.) with a
sector/industry
> > index
> > > > > (XAU, GLD,
> > > > > > > etc.) and with the actual stock.
> > > > > > >
> > > > > > > I am already able to compare the stock with the base
index
> > > > > > >
> > > > > > > (with the following formla:
> > > > > > >
> > > > > > > Ticker = GetBaseIndex(); // plot industry, need to
create
> > > > > composite
> > > > > > > sectors
> > > > > > >
> > > > > > > TickerName = IndustryID(1);
> > > > > > >
> > > > > > > TickerClose = Foreign( Ticker, "close" );
> > > > > > >
> > > > > > > for( i = 0; ( symbol = StrExtract( Ticker, i ) ) != "";
> > i++ )
> > > > > > > {
> > > > > > > fc = Foreign( ticker, "C" );
> > > > > > > }
> > > > > > >
> > > > > > > PlotGrid( 0, colorYellow );
> > > > > > >
> > > > > > > _N( Title = "{{NAME}} - Relative Performance [%]:
> > {{VALUES}}" );
> > > > > > >
> > > > > > > ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-10)) ;
> > > > > > > Current= ( 100 * ( C - Ref (Close, -10) ) / Ref
(Close, -
> > 10)) ;
> > > > > > >
> > > > > > > )
> > > > > > >
> > > > > > > but for some reasons I just don't know how to add a
sector
> > index
> > > > > to the
> > > > > > > thing so I can get a third graph...
> > > > > > >
> > > > > > > Louis
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > 2008/2/13, dingo <dingo@>:
> > > > > > > >
> > > > > > > > what data source are you using?
> > > > > > > >
> > > > > > > > d
> > > > > > > >
> > > > > > > > ------------------------------
> > > > > > > > *From:* amibroker@xxxxxxxxxxxxxxx<amibroker%
40yahoogroups.com><amibroker%
> > 40yahoogroups.com>
> > > > > [mailto:amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com><amibroker%
> > 40yahoogroups.com>] *On
> > > > > > > > Behalf Of *Louis Préfontaine
> > > > > > > > *Sent:* Wednesday, February 13, 2008 11:19 AM
> > > > > > > > *To:* amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com><amibroker%

> > 40yahoogroups.com>
> > > > > > > > *Subject:* Re: [amibroker] Re: Trouble trying to
compare
> > > > > industry and
> > > > > > > > market ...
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > Thanks for your help!
> > > > > > > >
> > > > > > > > I scanned the whole user guide but I think I am
missing
> > some
> > > > > insight on
> > > > > > > > this. The guide explains how to use the
relativestrength
> > or
> > > > > foreign, but I
> > > > > > > > just didn't see any example how to actually assign a
> > variable
> > > > > for BOTH the
> > > > > > > > marketid and the industry or sector. I have no trouble
> > > > > assigning a variable
> > > > > > > > to the base index, but I just can't use both
> > industry/sector
> > > > > and base index
> > > > > > > > at the same time. That's why I was wondering if
anybody
> > knew
> > > > > how to do this
> > > > > > > > and could show me an example of how to do it.
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > > > Louis
> > > > > > > >
> > > > > > > > 2008/2/13, wavemechanic <timesarrow@>:
> > > > > > > > >
> > > > > > > > > *The Users Guide and Library might provide some
help.
> > For
> > > > > example:
> > > > > > > > > *
> > > > > > > > > **
> > > > > > > > > *http://www.amibroker.com/guide/afl/afl_view.php?
id=123*
> > > > > > > > > **
> > > > > > > > > *http://www.amibroker.com/library/detail.php?id=294*
> > > > > > > > > **
> > > > > > > > > *Bill*
> > > > > > > > > **
> > > > > > > > > **
> > > > > > > > > *----- Original Message ----- *
> > *From: "louisprefontaine" <**
> > > > > > > > > rockprog80@* <rockprog80@>*>*
> > > > > > > > > *To:
> > > <**amibroker@xxxxxxxxxxxxxxx <%2A%2Aamibroker%40yahoogroups.com>
> > <%2A%2Aamibroker%40yahoogroups.com>*
> > > > >
> > > > > <amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com><amibroker%40yahoogroups.com>>*>*

> > > > > > > > > *Sent: Wednesday, February 13, 2008 10:55 AM*
> > > > > > > > > *Subject: [amibroker] Re: Trouble trying to compare
> > industry
> > > > > and
> > > > > > > > > market ...*
> > > > > > > > > *
> > > > > > > > > *
> > > > > > > > > *> Maybe my last message was not clear, so I will
try to
> > > > > explain
> > > > > > > > > better.
> > > > > > > > > >
> > > > > > > > > > I know how to use the getbaseindex() to get the
base
> > index
> > > > > (DJ, or
> > > > > > > > > > comp, etc.) for each of the stocks, and to apply a
> > formula
> > > > > on that
> > > > > > > > > > index. But what I really want to do is to get
BOTH the
> > > > > base index
> > > > > > > > > for
> > > > > > > > > > the stock AND the industry or sector index, as to
> > compare
> > > > > the
> > > > > > > > > > industry/sector index with the base index and
with the
> > > > > stock. I am
> > > > > > > > > > looking for 3 informations there to compare one to
> > each
> > > > > other.
> > > > > > > > > >
> > > > > > > > > > If anyone could help me with this issue, maybe by
> > telling
> > > > > me how I
> > > > > > > > > > could write such code to get both index and
industry
> > or
> > > > > sector, I
> > > > > > > > > > would greatly appreciate.
> > > > > > > > > >
> > > > > > > > > > I tried to search through all the information in
the
> > group
> > > > > in the
> > > > > > > > > last
> > > > > > > > > > years, but found no answer to my question.
> > > > > > > > > >
> > > > > > > > > > Thank you very much!
> > > > > > > > > >
> > > > > > > > > > Louis
> > > > > > > > > >
> > > > > > > > > > --- In
> > > **amibroker@xxxxxxxxxxxxxxx <%2A%2Aamibroker%40yahoogroups.com>
> > <%2A%2Aamibroker%40yahoogroups.com>*
> > > > >
> > > > > <amibroker@xxxxxxxxxxxxxxx <amibroker%
40yahoogroups.com><amibroker%40yahoogroups.com>>

> > > > > > > > > *, "louisprefontaine" <rockprog80@>* *
> > > > > > > > > > wrote:
> > > > > > > > > >>
> > > > > > > > > >> Hi,
> > > > > > > > > >>
> > > > > > > > > >> I am a newbie with Amibroker as well as on this
> > board, but
> > > > > I have
> > > > > > > > > some
> > > > > > > > > >> talent for learning and am trying to learn to
write
> > code
> > > > > really
> > > > > > > > > hard.
> > > > > > > > > >> So far, I had no problem that did not have a
> > solution.
> > > > > > > > > >>
> > > > > > > > > >> But now this is something that I don't
understand. I
> > want
> > > > > to
> > > > > > > > > compare
> > > > > > > > > >> a market indicator (such as the Dow Jones) and a
> > sector
> > > > > indicator
> > > > > > > > > >> (such as the mining index).
> > > > > > > > > >>
> > > > > > > > > >> Here is the code I wrote so far (I know it's
messy;
> > I'm
> > > > > still
> > > > > > > > > learning)
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > ----------------------------------------------------
----
> > --
> > > > > ----------------------------------------------------------
> > > > > --------------------------------------------
> > > > > > > > > >>
> > > > > > > > > >> Ticker = GetBaseIndex(); // plot industry, need
to
> > create
> > > > > composite
> > > > > > > > > >> sectors
> > > > > > > > > >>
> > > > > > > > > >> TickerName = IndustryID(1);
> > > > > > > > > >>
> > > > > > > > > >> TickerClose = Foreign( Ticker, "close" );
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> for( i = 0; ( symbol = StrExtract( Ticker,
i ) ) !
> > = "";
> > > > > i++ )
> > > > > > > > > >> {
> > > > > > > > > >> fc = Foreign( ticker, "C" );
> > > > > > > > > >> }
> > > > > > > > > >>
> > > > > > > > > >> PlotGrid( 0, colorYellow );
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> _N( Title = "{{NAME}} - Relative Performance [%]:
> > > > > {{VALUES}}" );
> > > > > > > > > >>
> > > > > > > > > >> ticker= ( 100 * ( fc - Ref( fc, -10 ))/Ref (fc,-
> > 10)) ;
> > > > > > > > > >> Current= ( 100 * ( C - Ref (Close, -10) ) / Ref
> > (Close, -
> > > > > 10)) ;
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > ----------------------------------------------------
----
> > --
> > > > > ----------------------------------------------------------
> > > > > ----------------------------------------------------------
> > > > > ------------------
> > > > > > > > > >>
> > > > > > > > > >> Basically, all I want to do is to add the
Industry
> > index
> > > > > along with
> > > > > > > > > >> the Market index which is what is displayed right
> > now.
> > > > > Anybody
> > > > > > > > > would
> > > > > > > > > >> know how to do this? I tried to experiment with
> > > > > getbaseindex and
> > > > > > > > > >> industry() and things like that but I got no way
to
> > add
> > > > > both
> > > > > > > > > >> marketid(0) and industryid (0) in the same piece
of
> > code.
> > > > > > > > > >>
> > > > > > > > > >> Thanks!!
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > *
> > > > > > > > > *> Please note that this group is for discussion
between
> > > > > users only.
> > > > > > > > > >
> > > > > > > > > > To get support from AmiBroker please send an e-
mail
> > > > > directly to
> > > > > > > > > > SUPPORT {at} amibroker.com
> > > > > > > > > >
> > > > > > > > > > For NEW RELEASE ANNOUNCEMENTS and other news
always
> > check
> > > > > DEVLOG:
> > > > > > > > > >
> > > > >
> >
**http://www.amibroker.com/devlog/*<http://www.amibroker.com/devlog/>
> > > > > > > > > *>
> > > > > > > > > > For other support material please check also:
> > > > > > > > > >
> > > > >
> >
**http://www.amibroker.com/support.html*<http://www.amibroker.com/supp
> > > > > ort.html>
> > > > > > > > > *>
> > > > > > > > > > Yahoo! Groups Links
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > **mailto:amibroker-
> > > > > fullfeatured@xxxxxxxxxxxxxxx <fullfeatured%
40yahoogroups.com><fullfeatured%40yahoogroups.com>*<
> > > > >
> > > amibroker-fullfeatured@xxxxxxxxxxxxxxx<amibroker-fullfeatured%
40yahoogroups.com>
> > <amibroker-fullfeatured%
> > 40yahoogroups.com>
> > > > > >
> > > > > > > > > *>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > No virus found in this incoming message.
> > > > > > > > > > Checked by AVG Free Edition.
> > > > > > > > > > Version: 7.5.516 / Virus Database: 269.20.4/1275 -
> > Release
> > > > > Date:
> > > > > > > > > 2/12/2008 3:20 PM
> > > > > > > > > >
> > > > > > > > > >*
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > ------------------------------
> > > > > > >
> > > > > > > No virus found in this incoming message.
> > > > > > > Checked by AVG Free Edition.
> > > > > > > Version: 7.5.516 / Virus Database: 269.20.4/1275 -
Release
> > Date:
> > > > > 2/12/2008
> > > > > > > 3:20 PM
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
> >
>