|
PureBytes Links
Trading Reference Links
|
yepper. I'd create a single layout and then have the different settings in
an array. I'd read in the original layout and then using the settings array
just write out a new layout file have AB load it export the image, etc. You
could use the same file name for the new layouts and then when finished
delete that file. That way you won't have to do a lot of layouts manually.
d
> -----Original Message-----
> From: amibroker@xxxxxxxxxxxxxxx
> [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of rlfoxworth2006
> Sent: Saturday, November 03, 2007 12:40 PM
> To: amibroker@xxxxxxxxxxxxxxx
> Subject: [amibroker] Re: Jscript question? How to save off
> multiple 15 minute charts?
>
> where the 12 is in the text is what gets changed for the interval.
>
> So, maybe the code can be written in a way to loadup one layout after
> another, saving the image between loading separate layouts thus
> having each layout with a separate symbol in it.
>
> RichardF.
>
>
> --- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@xxx> wrote:
> >
> > Why not just save the same layout under different names each one
> with a diff
> > interval and then compare them?
> >
> > d
> >
> > > -----Original Message-----
> > > From: amibroker@xxxxxxxxxxxxxxx
> > > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of rlfoxworth2006
> > > Sent: Saturday, November 03, 2007 12:18 PM
> > > To: amibroker@xxxxxxxxxxxxxxx
> > > Subject: [amibroker] Re: Jscript question? How to save off
> > > multiple 15 minute charts?
> > >
> > > So where or which line does the layout interval get saved?
> > >
> > >
> > > Some Text From Layout file:
> > >
> > >
> > > BROKWLT1
> > > 1
> > > ym dec 07-ecbot-fut
> > > 1
> > > 12 0 0 -1 -1
> > > -4 -30 123 34 1 0
> > > BROKLAY2
> > > 10
> > > Sheet1
> > > 5
> > > 2915 18
> > > 2916 18
> > > 2899 18
> > > 2894 18
> > > 2893 18
> > >
> > >
> > >
> > >
> > > --- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@> wrote:
> > > >
> > > > So if the modify the layout that will allow them to produce the
> > > imgages that
> > > > they want?
> > > >
> > > > d
> > > >
> > > > > -----Original Message-----
> > > > > From: amibroker@xxxxxxxxxxxxxxx
> > > > > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of Tomasz
> Janeczko
> > > > > Sent: Saturday, November 03, 2007 11:54 AM
> > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > Subject: Re: [amibroker] Re: Jscript question? How to save
> > > > > off multiple 15 minute charts?
> > > > >
> > > > > Hello,
> > > > >
> > > > > Right now it is somewhat tricky because the layout contains
> > > > > both symbol and timeframe selected,
> > > > > so you would need to either create separate layouts or change
> > > > > the ticker inside layout file prior to loading
> > > > > (it is plain text file, so can be easily modified
> > > programmatically).
> > > > >
> > > > > In the future there will be more straightforward ways to
> > > > > change display interval programmatically from OLE directly,
> > > > > without need to use layouts.
> > > > >
> > > > > Best regards,
> > > > > Tomasz Janeczko
> > > > > amibroker.com
> > > > > ----- Original Message -----
> > > > > From: "murthysuresh" <money@>
> > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > Sent: Saturday, November 03, 2007 2:14 PM
> > > > > Subject: [amibroker] Re: Jscript question? How to save off
> > > > > multiple 15 minute charts?
> > > > >
> > > > >
> > > > > > yes. murthysuresh is different from rlfoxworth2006 and
> > > aparrently i
> > > > > > guess we are going against the similar objectives
> > > > > > what i want to achieve is to take a list of symbols and
> > > > > take snapshot
> > > > > > of it under different timeframes
> > > > > > 1. weekly
> > > > > > 2. daily
> > > > > > 3. hourly
> > > > > >
> > > > > > I have done a application.open to open the tickers. however
> > > > > i cannot
> > > > > > change the timeframe for these tickers because if i use a
> > > > > .openlayout
> > > > > > it changes the symbols to whatever the default layout
> symbol
> > > was.
> > > > > > if i use a window.loadTemplate, it cannot change the
> timeframes.
> > > > > >
> > > > > > dunno what to do.
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@> wrote:
> > > > > >>
> > > > > >> I saw that but we've had others with diffent email
> addresses
> > > post
> > > > > > with
> > > > > >> varying id's.
> > > > > >>
> > > > > >> My bad. So are you he working on the same project?
> > > > > >>
> > > > > >> d
> > > > > >>
> > > > > >> > -----Original Message-----
> > > > > >> > From: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of
> > > rlfoxworth2006
> > > > > >> > Sent: Friday, November 02, 2007 11:37 PM
> > > > > >> > To: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > Subject: [amibroker] Re: Jscript question? How to save
> off
> > > > > >> > multiple 15 minute charts?
> > > > > >> >
> > > > > >> > No, as you can see my name is RichardF. Richard
> Foxworth
> > > > > >> > rlfoxworth2006 in the email address is the clue....
> > > > > >> >
> > > > > >> > RichardF.
> > > > > >> >
> > > > > >> >
> > > > > >> > --- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@> wrote:
> > > > > >> > >
> > > > > >> > > Are you the same person as "murthysuresh"?
> > > > > >> > >
> > > > > >> > > If so please don't post under both id's - use just
> one -
> > > its
> > > > > > very
> > > > > >> > > confusing..
> > > > > >> > >
> > > > > >> > > If not - nevermind.
> > > > > >> > >
> > > > > >> > > d
> > > > > >> > >
> > > > > >> > > > -----Original Message-----
> > > > > >> > > > From: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > > > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf Of
> > > > > rlfoxworth2006
> > > > > >> > > > Sent: Friday, November 02, 2007 11:23 PM
> > > > > >> > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > > > Subject: [amibroker] Re: Jscript question? How to
> save
> > > off
> > > > > >> > > > multiple 15 minute charts?
> > > > > >> > > >
> > > > > >> > > > I've spent a week of hours on this and finally gave
> up
> > > and
> > > > > >> > emailed
> > > > > >> > > > earlier to see if I could get a version of software
> with
> > > 20
> > > > > > and
> > > > > >> > 30
> > > > > >> > > > minute built-in interval for the Database Settings.
> > > > > >> > > >
> > > > > >> > > > Richard
> > > > > >> > > >
> > > > > >> > > > --- In amibroker@xxxxxxxxxxxxxxx, Graham
> <kavemanperth@>
> > > > > > wrote:
> > > > > >> > > > >
> > > > > >> > > > > Have you tired template instead of layout?
> > > > > >> > > > >
> > > > > >> > > > > --
> > > > > >> > > > > Cheers
> > > > > >> > > > > Graham Kav
> > > > > >> > > > > AFL Writing Service
> > > > > >> > > > > http://www.aflwriting.com
> > > > > >> > > > >
> > > > > >> > > > >
> > > > > >> > > > > On 03/11/2007, dingo <dingo@> wrote:
> > > > > >> > > > > > try loading the layout and then the symbol.
> > > > > >> > > > > >
> > > > > >> > > > > > d
> > > > > >> > > > > >
> > > > > >> > > > > > > -----Original Message-----
> > > > > >> > > > > > > From: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > > > > > > [mailto:amibroker@xxxxxxxxxxxxxxx] On Behalf
> Of
> > > > > > murthysuresh
> > > > > >> > > > > > > Sent: Friday, November 02, 2007 10:57 PM
> > > > > >> > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > >> > > > > > > Subject: [amibroker] Re: Jscript question? How
> to
> > > save
> > > > > > off
> > > > > >> > > > > > > multiple 15 minute charts?
> > > > > >> > > > > > >
> > > > > >> > > > > > > TJ: I thought it was working properly. but
> > > aparrently
> > > > > > not.
> > > > > >> > > > > > > here is the problem
> > > > > >> > > > > > >
> > > > > >> > > > > > > oADoc=application.Documents.open(
> tradeObj.Symbol)
> > > > > > opens my
> > > > > >> > > > symbol
> > > > > >> > > > > > > application.LoadLayout("C:\\Program
> > > > > >> > > > > > > Files\\AmiBroker\\Layouts\\DailyLayout.awl")-
> > > loads my
> > > > > >> > layout.
> > > > > >> > > > this
> > > > > >> > > > > > > replaces the symbol with the symbol that was
> in
> > > the
> > > > > > saved
> > > > > >> > > > layotu.
> > > > > >> > > > > > >
> > > > > >> > > > > > > now how do i open a specific symbol with a
> > > particular
> > > > > >> > layout.
> > > > > >> > > > > > >
> > > > > >> > > > > > > seede
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "Tomasz
> > > Janeczko"
> > > > > >> > <groups@>
> > > > > >> > > > > > > wrote:
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > Hello,
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > You can do this by using LoadLayout()
> function
> > > (from
> > > > > >> > > > Application
> > > > > >> > > > > > > object).
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > 1. Define separate layout for each interval
> you
> > > want
> > > > > > to
> > > > > >> > use
> > > > > >> > > > > > > > 2. Call LoadLayout() to display given
> interval.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > Best regards,
> > > > > >> > > > > > > > Tomasz Janeczko
> > > > > >> > > > > > > > amibroker.com
> > > > > >> > > > > > > > ----- Original Message -----
> > > > > >> > > > > > > > From: "murthysuresh" <money@>
> > > > > >> > > > > > > > To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > >> > > > > > > > Sent: Saturday, October 27, 2007 3:54 AM
> > > > > >> > > > > > > > Subject: [amibroker] Re: Jscript question?
> How
> > > to
> > > > > > save
> > > > > >> > off
> > > > > >> > > > multiple
> > > > > >> > > > > > > 15 minute charts?
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > > TJ
> > > > > >> > > > > > > > > How do you then programatically open chart
> > > > > in other
> > > > > >> > > > timeframes
> > > > > >> > > > > > > other
> > > > > >> > > > > > > > > than base interval. Is there any specific
> > > > > function.
> > > > > > If
> > > > > >> > you
> > > > > >> > > > do
> > > > > >> > > > > > > > > AB.Documents.Open(ticker), it will always
> open
> > > the
> > > > > >> > chart in
> > > > > >> > > > base
> > > > > >> > > > > > > > > interval.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > If --- In
> amibroker@xxxxxxxxxxxxxxx, "Tomasz
> > > > > > Janeczko"
> > > > > >> > > > <groups@>
> > > > > >> > > > > > > > > wrote:
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >> Hello,
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >> Base time interval is something that you
> > > should
> > > > > > set at
> > > > > >> > > > database
> > > > > >> > > > > > > > > creation time and
> > > > > >> > > > > > > > >> leave untouched. It is a "base" of all
> other
> > > > > >> > timeframes
> > > > > >> > > > you may
> > > > > >> > > > > > > need
> > > > > >> > > > > > > > >> to use, therefore we strongly recommend
> to
> > > use
> > > > > > base
> > > > > >> > time
> > > > > >> > > > > > > interval
> > > > > >> > > > > > > > > of 1-minute
> > > > > >> > > > > > > > >> as it allows then to view/analyse ANY X-
> > > minute
> > > > > >> > interval or
> > > > > >> > > > X-
> > > > > >> > > > > > > hour
> > > > > >> > > > > > > > > interval
> > > > > >> > > > > > > > >> (where X is user definable).
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >> Best regards,
> > > > > >> > > > > > > > >> Tomasz Janeczko
> > > > > >> > > > > > > > >> amibroker.com
> > > > > >> > > > > > > > >> ----- Original Message -----
> > > > > >> > > > > > > > >> From: "murthysuresh" <money@>
> > > > > >> > > > > > > > >> To: <amibroker@xxxxxxxxxxxxxxx>
> > > > > >> > > > > > > > >> Sent: Saturday, October 27, 2007 12:40 AM
> > > > > >> > > > > > > > >> Subject: [amibroker] Re: Jscript
> question?
> > > How to
> > > > > > save
> > > > > >> > off
> > > > > >> > > > > > > multiple
> > > > > >> > > > > > > > > 15 minute charts?
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >> > you cannot do it. however you can
> manuplate
> > > the
> > > > > >> > intraday
> > > > > >> > > > > > > interval
> > > > > >> > > > > > > > >> > using preferences/ intraday /custom
> time
> > > > > > intervals
> > > > > >> > to
> > > > > >> > > > whatever
> > > > > >> > > > > > > > >> > settings u want.
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > --- In
> > > > > > amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > >> > > > > > > > >> > <rlfoxworth2006@> wrote:
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >> BTW that worked great! Now, how do I
> > > > > change the
> > > > > >> > Base
> > > > > >> > > > Interval
> > > > > >> > > > > > > > > say
> > > > > >> > > > > > > > >> > to
> > > > > >> > > > > > > > >> >> 20 minutes? The Base Time Interval
> > > > > only has 1,
> > > > > > 5,
> > > > > >> > 15
> > > > > >> > > > minute
> > > > > >> > > > > > > > > listed.
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >> Thanks,
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >> RichardF.
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >> --- In
> > > > > > amibroker@xxxxxxxxxxxxxxx, "murthysuresh"
> > > > > >> > > > <money@>
> > > > > >> > > > > > > wrote:
> > > > > >> > > > > > > > >> >> >
> > > > > >> > > > > > > > >> >> > NO. it only means that there is a
> bar
> > > for
> > > > > > every
> > > > > >> > 15
> > > > > >> > > > minutes.
> > > > > >> > > > > > > > > the
> > > > > >> > > > > > > > >> >> data
> > > > > >> > > > > > > > >> >> > in the bar would be refreshed based
> on
> > > the
> > > > > >> > properties
> > > > > >> > > > u
> > > > > >> > > > > > > ahve
> > > > > >> > > > > > > > >> > setup
> > > > > >> > > > > > > > >> >> in
> > > > > >> > > > > > > > >> >> > the refresh times in preferences.
> > > > > >> > > > > > > > >> >> > the 1 minute indicates the lowest
> > > resolution
> > > > > > of
> > > > > >> > the
> > > > > >> > > > data
> > > > > >> > > > > > > > > stored
> > > > > >> > > > > > > > >> > in
> > > > > >> > > > > > > > >> >> > ab. so if you goto quote editor, it
> > > > > will show
> > > > > > the
> > > > > >> > > > data in 1
> > > > > >> > > > > > > > >> > minute
> > > > > >> > > > > > > > >> >> > frequency.
> > > > > >> > > > > > > > >> >> >
> > > > > >> > > > > > > > >> >> >
> > > > > >> > > > > > > > >> >> > --- In
> > > > > > amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > >> > > > > > > > >> >> > <rlfoxworth2006@> wrote:
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > > If the Base Time Interval is 1
> Minute
> > > and
> > > > > > you
> > > > > >> > > > change it
> > > > > >> > > > > > > to
> > > > > >> > > > > > > > > 15
> > > > > >> > > > > > > > >> >> > minutes
> > > > > >> > > > > > > > >> >> > > does that mean the data coming in
> > > updates
> > > > > > every
> > > > > >> > 15
> > > > > >> > > > > > > minutes
> > > > > >> > > > > > > > > and
> > > > > >> > > > > > > > >> >> > there
> > > > > >> > > > > > > > >> >> > > is no pulling charts less than 15
> > > minute
> > > > > >> > intervals?
> > > > > >> > > > > > > Example
> > > > > >> > > > > > > > > of
> > > > > >> > > > > > > > >> >> > > looking at charts say 3 min , 5
> min,
> > > 10
> > > > > > min...?
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > > Is there some way to tell the
> program
> > > to
> > > > > > use 15
> > > > > >> > > > minutes
> > > > > >> > > > > > > > > instead
> > > > > >> > > > > > > > >> >> of
> > > > > >> > > > > > > > >> >> > > default?
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > > Thanks....
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > > RichardF.
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> > > --- In
> > > > > >> > amibroker@xxxxxxxxxxxxxxx, "murthysuresh"
> > > > > >> > > > <money@>
> > > > > >> > > > > > > > > wrote:
> > > > > >> > > > > > > > >> >> > > >
> > > > > >> > > > > > > > >> >> > > > AB.Documents.Open opens the
> chart in
> > > the
> > > > > > base
> > > > > >> > time
> > > > > >> > > > > > > frame.
> > > > > >> > > > > > > > >> >> > > >
> > > > > >> > > > > > > > >> >> > > > -- In
> > > > > >> > amibroker@xxxxxxxxxxxxxxx, "rlfoxworth2006"
> > > > > >> > > > > > > > >> >> > > > <rlfoxworth2006@> wrote:
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > Hi,
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > Jscript question? How to save
> off
> > > > > > multiple
> > > > > >> > 15
> > > > > >> > > > minute
> > > > > >> > > > > > > > > charts?
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > I've tried this code that was
> > > > > posted on
> > > > > > the
> > > > > >> > > > board and
> > > > > >> > > > > > > it
> > > > > >> > > > > > > > >> >> seems
> > > > > >> > > > > > > > >> >> > to
> > > > > >> > > > > > > > >> >> > > > > work and save the files just
> > > > > fine. But
> > > > > >> > having
> > > > > >> > > > an
> > > > > >> > > > > > > active
> > > > > >> > > > > > > > >> >> window
> > > > > >> > > > > > > > >> >> > > > > selected and with a 15 minute
> > > interval
> > > > > >> > > > selected, the
> > > > > >> > > > > > > > >> > program
> > > > > >> > > > > > > > >> >> > > loads
> > > > > >> > > > > > > > >> >> > > > up
> > > > > >> > > > > > > > >> >> > > > > and saves off only one minute
> > > charts
> > > > > >> > instead of
> > > > > >> > > > the
> > > > > >> > > > > > > 15
> > > > > >> > > > > > > > >> >> minutes
> > > > > >> > > > > > > > >> >> > > > charts.
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > Help please and thanks... Been
> > > > > > searching
> > > > > >> > all
> > > > > >> > > > evening
> > > > > >> > > > > > > for
> > > > > >> > > > > > > > >> >> answer
> > > > > >> > > > > > > > >> >> > > > > before asking....
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > RichardF.
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > -------------------------
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > Save file as jscript file and
> run
> > > and
> > > > > > place
> > > > > >> > > > tickers
> > > > > >> > > > > > > in
> > > > > >> > > > > > > > >> >> > Watchlist
> > > > > >> > > > > > > > >> >> > > 0.
> > > > > >> > > > > > > > >> >> > > > > ------------------
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > iWatchList = 0; /* you can
> > > > > define watch
> > > > > >> > list num
> > > > > >> > > > > > > > >> > operations.
> > > > > >> > > > > > > > >> >> > ber
> > > > > >> > > > > > > > >> >> > > > here
> > > > > >> > > > > > > > >> >> > > > > */
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > AB = new ActiveXObject
> > > > > >> > ("Broker.Application");
> > > > > >> > > > > > > > >> >> > > > > AW = AB.ActiveWindow;
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > Qty = AB.Stocks.Count;
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > for( i = 0; i < Qty; i++ )
> > > > > >> > > > > > > > >> >> > > > > {
> > > > > >> > > > > > > > >> >> > > > > Stk = AB.Stocks( i );
> > > > > >> > > > > > > > >> >> > > > > if( iWatchList < 32 )
> > > > > >> > > > > > > > >> >> > > > > {
> > > > > >> > > > > > > > >> >> > > > > if( Stk.WatchListBits & ( 1
> <<
> > > > > >> > iWatchList ) )
> > > > > >> > > > > > > > >> >> > > > > {
> > > > > >> > > > > > > > >> >> > > > > Doc = AB.Documents.Open(
> > > > > > Stk.Ticker );
> > > > > >> > > > > > > > >> >> > > > > WScript.Sleep( 4000 ); // 4
> > > seconds
> > > > > > delay
> > > > > >> > > > > > > > >> >> > > > > AB.ActiveWindow.ExportImage
> > > > > > (Stk.Ticker
> > > > > >> > > > + ".png")
> > > > > >> > > > > > > > >> >> > > > > Doc.Close();
> > > > > >> > > > > > > > >> >> > > > > }
> > > > > >> > > > > > > > >> >> > > > > }
> > > > > >> > > > > > > > >> >> > > > > else
> > > > > >> > > > > > > > >> >> > > > > {
> > > > > >> > > > > > > > >> >> > > > > if( Stk.WatchListBits2 & ( 1
> <<
> > > (
> > > > > >> > iWatchList -
> > > > > >> > > > > > > 32 )) )
> > > > > >> > > > > > > > >> >> > > > > {
> > > > > >> > > > > > > > >> >> > > > > Doc = AB.Documents.Open(
> > > > > > Stk.Ticker );
> > > > > >> > > > > > > > >> >> > > > > AB.ActiveWindow.ExportImage
> > > > > > (Stk.Ticker
> > > > > >> > > > + ".png")
> > > > > >> > > > > > > > >> >> > > > > WScript.Sleep( 4000 ); // 4
> > > seconds
> > > > > > delay
> > > > > >> > > > > > > > >> >> > > > > Doc.Close();
> > > > > >> > > > > > > > >> >> > > > > }
> > > > > >> > > > > > > > >> >> > > > > }
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > > > }
> > > > > >> > > > > > > > >> >> > > > >
> > > > > >> > > > > > > > >> >> > > >
> > > > > >> > > > > > > > >> >> > >
> > > > > >> > > > > > > > >> >> >
> > > > > >> > > > > > > > >> >>
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > Please note that this group is for
> > > discussion
> > > > > >> > between
> > > > > >> > > > users
> > > > > >> > > > > > > only.
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > To get support from AmiBroker please
> send
> > > an e-
> > > > > > mail
> > > > > >> > > > directly
> > > > > >> > > > > > > to
> > > > > >> > > > > > > > >> > SUPPORT {at} amibroker.com
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > For NEW RELEASE ANNOUNCEMENTS and other
> > > news
> > > > > > always
> > > > > >> > check
> > > > > >> > > > > > > DEVLOG:
> > > > > >> > > > > > > > >> > http://www.amibroker.com/devlog/
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > For other support material please check
> > > also:
> > > > > >> > > > > > > > >> > http://www.amibroker.com/support.html
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> > Yahoo! Groups Links
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >> >
> > > > > >> > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > Please note that this group is for
> discussion
> > > > > > between
> > > > > >> > users
> > > > > >> > > > only.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > To get support from AmiBroker please send
> > > > > an e-mail
> > > > > >> > > > directly to
> > > > > >> > > > > > > > > SUPPORT {at} amibroker.com
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > For NEW RELEASE ANNOUNCEMENTS and other
> > > > > news always
> > > > > >> > check
> > > > > >> > > > DEVLOG:
> > > > > >> > > > > > > > > http://www.amibroker.com/devlog/
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > For other support material please check
> also:
> > > > > >> > > > > > > > > http://www.amibroker.com/support.html
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > Yahoo! Groups Links
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > > Please note that this group is for discussion
> > > between
> > > > > > users
> > > > > >> > > > only.
> > > > > >> > > > > > >
> > > > > >> > > > > > > To get support from AmiBroker please send an e-
> > > mail
> > > > > >> > directly to
> > > > > >> > > > > > > SUPPORT {at} amibroker.com
> > > > > >> > > > > > >
> > > > > >> > > > > > > For NEW RELEASE ANNOUNCEMENTS and other news
> > > always
> > > > > > check
> > > > > >> > > > DEVLOG:
> > > > > >> > > > > > > http://www.amibroker.com/devlog/
> > > > > >> > > > > > >
> > > > > >> > > > > > > For other support material please check also:
> > > > > >> > > > > > > http://www.amibroker.com/support.html
> > > > > >> > > > > > >
> > > > > >> > > > > > > Yahoo! Groups Links
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > > Please note that this group is for discussion
> > > between
> > > > > > users
> > > > > >> > only.
> > > > > >> > > > > >
> > > > > >> > > > > > To get support from AmiBroker please send an e-
> mail
> > > > > > directly
> > > > > >> > to
> > > > > >> > > > > > SUPPORT {at} amibroker.com
> > > > > >> > > > > >
> > > > > >> > > > > > For NEW RELEASE ANNOUNCEMENTS and other news
> > > > > always check
> > > > > >> > DEVLOG:
> > > > > >> > > > > > http://www.amibroker.com/devlog/
> > > > > >> > > > > >
> > > > > >> > > > > > For other support material please check also:
> > > > > >> > > > > > http://www.amibroker.com/support.html
> > > > > >> > > > > >
> > > > > >> > > > > > Yahoo! Groups Links
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > Please note that this group is for discussion
> between
> > > users
> > > > > > only.
> > > > > >> > > >
> > > > > >> > > > To get support from AmiBroker please send an e-mail
> > > directly
> > > > > > to
> > > > > >> > > > SUPPORT {at} amibroker.com
> > > > > >> > > >
> > > > > >> > > > For NEW RELEASE ANNOUNCEMENTS and other news always
> > > check
> > > > > > DEVLOG:
> > > > > >> > > > http://www.amibroker.com/devlog/
> > > > > >> > > >
> > > > > >> > > > For other support material please check also:
> > > > > >> > > > http://www.amibroker.com/support.html
> > > > > >> > > >
> > > > > >> > > > Yahoo! Groups Links
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > Please note that this group is for discussion between
> users
> > > only.
> > > > > >> >
> > > > > >> > To get support from AmiBroker please send an e-mail
> directly
> > > to
> > > > > >> > SUPPORT {at} amibroker.com
> > > > > >> >
> > > > > >> > For NEW RELEASE ANNOUNCEMENTS and other news always
> check
> > > DEVLOG:
> > > > > >> > http://www.amibroker.com/devlog/
> > > > > >> >
> > > > > >> > For other support material please check also:
> > > > > >> > http://www.amibroker.com/support.html
> > > > > >> >
> > > > > >> > Yahoo! Groups Links
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Please note that this group is for discussion between users
> > > only.
> > > > > >
> > > > > > To get support from AmiBroker please send an e-mail
> directly to
> > > > > > SUPPORT {at} amibroker.com
> > > > > >
> > > > > > For NEW RELEASE ANNOUNCEMENTS and other news always check
> > > DEVLOG:
> > > > > > http://www.amibroker.com/devlog/
> > > > > >
> > > > > > For other support material please check also:
> > > > > > http://www.amibroker.com/support.html
> > > > > >
> > > > > > Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > Please note that this group is for discussion between users
> only.
> > > > >
> > > > > To get support from AmiBroker please send an e-mail directly
> to
> > > > > SUPPORT {at} amibroker.com
> > > > >
> > > > > For NEW RELEASE ANNOUNCEMENTS and other news always check
> DEVLOG:
> > > > > http://www.amibroker.com/devlog/
> > > > >
> > > > > For other support material please check also:
> > > > > http://www.amibroker.com/support.html
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > > Please note that this group is for discussion between users only.
> > >
> > > To get support from AmiBroker please send an e-mail directly to
> > > SUPPORT {at} amibroker.com
> > >
> > > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > > http://www.amibroker.com/devlog/
> > >
> > > For other support material please check also:
> > > http://www.amibroker.com/support.html
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
>
> Please note that this group is for discussion between users only.
>
> To get support from AmiBroker please send an e-mail directly to
> SUPPORT {at} amibroker.com
>
> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> http://www.amibroker.com/devlog/
>
> For other support material please check also:
> http://www.amibroker.com/support.html
>
> Yahoo! Groups Links
>
>
>
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
http://www.amibroker.com/devlog/
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/amibroker/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:amibroker-digest@xxxxxxxxxxxxxxx
mailto:amibroker-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|