|
PureBytes Links
Trading Reference Links
|
whenthey reach the -1 at the same time if the others goes below that
it's ok
--- In amibroker@xxxxxxxxxxxxxxx, Graham <kavemanperth@xxx> wrote:
>
> Do they all equal -1 on the same bar? If they are not all exactly
equal to
> -1 on the same bar you will not get a signal
> You have to be precise in the conditions.
> Do you want them to all cross the -1 value on the same bar, in
which case
> use the cross function for all 3 statements
> or are you looking for one to cross -1 and the others to already be
below
> -1, in whch case change the conditions to suit
>
>
> --
> Cheers
> Graham
> AB-Write >< Professional AFL Writing Service
> Yes, I write AFL code to your requirements
> http://www.aflwriting.com
>
> On 09/12/06, Dheya1 <dheya1@xxx> wrote:
> >
> > its getting regularly and i can send you photo for that
> >
> > --- In amibroker@xxxxxxxxxxxxxxx, "ricko8294_98" <ricko@> wrote:
> > >
> > > That is probably because all three do not get to -1 at the same
> > time.
> > > R
> > > --- In amibroker@xxxxxxxxxxxxxxx, "Dheya1" <dheya1@> wrote:
> > > >
> > > > i got this one from amibroker supports but still its not
working
> > > >
> > > > Buy = InvFisherTfm1( Value2 ) == -1 AND InvFisherTfm2(
Value4 )
> > == -
> > > 1
> > > > AND InvFisherTfm4( Value11 ) == -1;
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --- In amibroker@xxxxxxxxxxxxxxx, "Dheya1" <dheya1@> wrote:
> > > > >
> > > > > any one can help me to write a buy signel
> > > > >
> > > > >
> > > > > if you can help me with the buy signel for the multticycle,
i
> > > need
> > > > > to buy when the three lines ( "DSS", colorDarkGreen
and "RSI",
> > > > > colorBlue, styleThick and "VFI", colorYellow, styleThick )
> > > > together
> > > > > reach -1 .
> > > > >
> > > > >
> > > > >
> > > > > _SECTION_BEGIN("MultiCycle 1[1].0");
> > > > >
> > > > > /*
> > > > >
> > > > > MULTICYCLE 1.0
> > > > >
> > > > > By Brian Richard
> > > > >
> > > > > */
> > > > >
> > > > > /* Volume Flow Indicator */
> > > > >
> > > > > Period = Param("VFI Period",26,26,1300,1);
> > > > >
> > > > > Coef=0.2;
> > > > >
> > > > > VCoef=Param("Max. vol. cutoff",2.5,2.5,50,1);
> > > > >
> > > > > inter = log(Avg)-log(Ref(Avg,-1));
> > > > >
> > > > > Vinter = StDev(inter,30);
> > > > >
> > > > > Cutoff=Coef*Vinter*Close;
> > > > >
> > > > > Vave=Ref(MA(V,Period),-1);
> > > > >
> > > > > Vmax=Vave*Vcoef;
> > > > >
> > > > > Vc=Min(V,VMax);
> > > > >
> > > > > MF=Avg-Ref(Avg,-1);
> > > > >
> > > > > VCP=IIf(MF>Cutoff,VC,IIf(MF<-Cutoff,-VC,0));
> > > > >
> > > > > VFI1=Sum(VCP,Period)/Vave;
> > > > >
> > > > > VFI=EMA(VFI1,3);
> > > > >
> > > > > /* Double Smoothed Stochastic - DSS */
> > > > >
> > > > > Slw = 4; Pds = 4;
> > > > >
> > > > > A = EMA((Close-LLV(Low,Pds))/(HHV(H,pds)-LLV(L,Pds)),Slw)
*100;
> > > > >
> > > > > DSS = EMA((A-LLV(A,pds))/(HHV(A,Pds)-LLV(A,Pds)),Slw)*100;
> > > > >
> > > > > /* Tom DeMark's Range Expansion Index */
> > > > >
> > > > > HighMom = H - Ref( H, -2 );
> > > > >
> > > > > LowMom = L - Ref( L, -2 );
> > > > >
> > > > > Cond1 = ( H >= Ref( L,-5) OR H >= Ref( L, -6 ) );
> > > > >
> > > > > Cond2 = ( Ref( H, -2 ) >= Ref( C, -7 ) OR Ref( H, -2 ) >=
Ref(
> > > C, -
> > > > > 8 ) );
> > > > >
> > > > > Cond3 = ( L <= Ref( H, -5 ) OR L <= Ref( H, -6) );
> > > > >
> > > > > Cond4 = ( Ref( L, -2 ) <= Ref( C, -7 ) OR Ref( L, -2 ) <=
Ref(
> > > C, -
> > > > > 8 ) );
> > > > >
> > > > > Cond = ( Cond1 OR Cond2 ) AND ( Cond3 OR Cond4 );
> > > > >
> > > > > Num = IIf( Cond, HighMom + LowMom, 0 );
> > > > >
> > > > > Den = abs( HighMom ) + abs( LowMom );
> > > > >
> > > > > TDREI = 100 * Sum( Num, 5 )/Sum( Den, 5 ) ;
> > > > >
> > > > > // General - purpose Inverse Fisher Transform function
> > > > >
> > > > > function InvFisherTfm1( array1 )
> > > > >
> > > > > {
> > > > >
> > > > > e2y1 = exp( 2 * array1 );
> > > > >
> > > > > return ( e2y1 - 1 )/( e2y1 + 1 );
> > > > >
> > > > > }
> > > > >
> > > > > function InvFisherTfm2( array2 )
> > > > >
> > > > > {
> > > > >
> > > > > e2y2 = exp( 2 * array2 );
> > > > >
> > > > > return ( e2y2 - 1 )/( e2y2 + 1 );
> > > > >
> > > > > }
> > > > >
> > > > > function InvFisherTfm3( array3 )
> > > > >
> > > > > {
> > > > >
> > > > > e2y3 = exp( 2 * array3 );
> > > > >
> > > > > return ( e2y3 - 1 )/( e2y3 + 1 );
> > > > >
> > > > > }
> > > > >
> > > > > function InvFisherTfm4( array4 )
> > > > >
> > > > > {
> > > > >
> > > > > e2y4 = exp( 2 * array4 );
> > > > >
> > > > > return ( e2y4 - 1 )/( e2y4 + 1 );
> > > > >
> > > > > }
> > > > >
> > > > > Value1 = 0.1 * (DSS-55);
> > > > >
> > > > > Value2 = WMA( Value1, 5 );
> > > > >
> > > > > Value3 = 0.1 * ( RSI( 5 ) - 50 );
> > > > >
> > > > > Value4 = WMA( Value3, 10 );
> > > > >
> > > > > Value5 = 0.03 * (TDREI);
> > > > >
> > > > > Value6 = WMA( Value5, 10 );
> > > > >
> > > > > Value10 = VFI;
> > > > >
> > > > > Value11 = EMA(VFI,10);
> > > > >
> > > > > Plot( InvFisherTfm1( Value2 ), "DSS", colorDarkGreen,
> > > styleThick );
> > > > >
> > > > > Plot( InvFisherTfm2( Value4 ), "RSI", colorBlue,
styleThick );
> > > > >
> > > > > Plot( InvFisherTfm3( Value6 ), "REI", colorRed,
styleThick );
> > > > >
> > > > > Plot( InvFisherTfm4( Value11 ), "VFI", colorYellow,
> > styleThick );
> > > > >
> > > > > Plot(0,"",colorDarkBlue,styleDots);
> > > > >
> > > > > PlotGrid( 0.5 );
> > > > >
> > > > > PlotGrid(-0.5 );
> > > > >
> > > > > _SECTION_END();
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Regards
> > > > >
> > > >
> > >
> >
> >
> >
> >
> > Please note that this group is for discussion between users only.
> >
> > To get support from AmiBroker please send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > For other support material please check also:
> > http://www.amibroker.com/support.html
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
Content-Description: "AVG certification"
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 3:41 PM
|