Thanks Ron. That's good to
know.
I guess I might face that issue since my HP 4L
is many years old.
But I haven't checked. Neither have I checked on
the graphics card. My Intel 64 is about that old.
JOE
----- Original Message -----
Sent: Saturday, March 18, 2006 9:10
PM
Subject: Re: [amibroker]
GetExtraData
In the first half of 2005, I bought a new faster
computer with the XP Pro64 operating system and an AMD 64 Dual
Processor.
The only minor problem has been the lack of
a 64 bit driver for a printer that I have.
The 64bit operating system and computer have
worked very well. Ron D
----- Original Message -----
Sent: Saturday, March 18, 2006 8:45
PM
Subject: Re: [amibroker]
GetExtraData
I should have added For ME it's not
worth the trade off yet.
But more skillful folks will surely
benefit. Undoubtedly we'll
have to move to Window 64.
Best regards
JOE
----- Original Message -----
Sent: Saturday, March 18, 2006 5:51
PM
Subject: Re: [amibroker]
GetExtraData
Thanks Jim.
I'll do that and send you the most recent
note.
Don't know if strength in numbers will
help but it should! I don't have a count but it's a bit of revenue
for Gary.
On 64 bits, the trade off of a new windows
installation vs a stable desk top is not worth it yet.
Best regards
JOE
----- Original Message -----
Sent: Saturday, March 18, 2006 5:07
PM
Subject: Re: [amibroker]
GetExtraData
Please add me to the QP3 list as well. I use them for my
data source and I would appreciate an x64 plugin with more access to the
data provided in QP. Jim Hutchison
At 08:11 AM 3/17/2006, you
wrote:
Joe,
Please add me
to the QP3 list as well.
Thanks
Steve
At
07:26 AM 3/17/2006, you wrote:
Hello there - Guess we have some common interest.
CANSLIM first.
I'm assuming you have Stock Picker Pro
installed with your QP3? It comes with the QP3 CD for no
additional charge. SPP has dozens of filters, one of which is
called CANSLIM. I've attached a screen shot and you'll see that
at least 2 of the data fields needed are not exposed by the AB
plugin that Tomasz has provided us, like CQIE and CYIE. A
couple of options 1) if important enough maybe we could talk Tomasz
into adding those 2 extra fields in the plug in, or 2) ask
someone who has the skills with the AB SDK could take the plug in
and extend it for those 2 fields. I've never fired up the SDK
myself and not sure I have all the elements in my development
desktop to do this. I run the CANSLIM filter on QP3
and get somewheres around 175-200 good stocks every day that form a
small universe of stocks with good fundamentals and price change
momentum. 3) EPS is
an array and if you plot it you'll see it changes every quarter.. So
by either running an explore or a plot you can see if
Ref(EPSarray,-66) works or not. I'd take it outside the
reference function just to be conservative like EPSArray =
GetExtradata("EPS"); 1) and 2) Lots of good documentation in
SPP, like the following that should remove any doubt in your mind as
to what the fields are. We had a 'birds of a feather' meeting at the Amibroker
Conference in Houston and there were about 12 QP3 users there. I
have a distribution list that I'm adding your name to and if you
don't want to be copied on some of our mailings please let me know
and I'll take you off it. Dan Clark is very active and has been
providing information for the forum, to our group and feed back to
the owner of Quotes Plus, hopefully to some avail.
Hope this
helps. Joe
% 5Yr EPS
Gr
Description: 5 Year Earnings Per Share
Growth The percentage change in current fiscal year
earnings compared to five years ago fiscal year
earnings . Source: Quotes Plus Filter
category: Fund Earnings - %
EPS
CYIE Description: Continuous Yearly
Improvement in Earnings Per Share The objective is to find
securities with year after year of continuous EPS growth for the
past 3 years. The year is based on a trailing twelve month
(TTM ) basis. The yearly difference between the most recent
EPS quarter and the same quarter a year ago is computed. This
backwards computation is done to arrive at 4 yearly EPS
values. If the difference for most recent yearly EPS value is
greater than the previous year (not equal) we add one to the
count. This type of backwards comparison goes on until one of
two events occur:
- All 3 yearly time periods have been processed or
- The security fails with a yearly comparison that doesn't
increase, the process will stop and the count is recorded
The process results in a number from 0 – 3. A
security with consecutive upward yearly progress will get a value of
3 (3 years of steady upward
% 1Yr EPS Gr
(TTM)
Description: 1 Year Earning Per Share Growth
(trailing 4 quarters) The percentage change using the sum of
the last 4 quarters of EPS compared to the sum of
the prior 4 quarters of EPS . This is a
current 4 quarter over the previous 4 quarters EPS comparison as opposed to the data fields:
EPS Chg which is comparing the current quarters
EPS to the same quarter a year ago.
% 1Yr EPS Gr which is comparing the current fiscal year
EPS to the prior fiscal year EPS .
Source: Computed Filter category: Fund
Earnings - % EPS
----- Original Message -----
- From: fatboycato
- To: amibroker@xxxxxxxxxxxxxxx
- Sent: Friday, March 17, 2006 12:51 AM
- Subject: [amibroker] GetExtraData
- I have a few questions about the fundamental data coming
out of QP3
- that I hoped someone here could answer:
- I'm pretty sure that sales and sharesfloat are reported in
millions
- (e.g. "1.2" means 1,200,000), and sharesshort are reported in
- thousands (e.g. "1,200" means 1,200,000), but I don't know
about
- some of the others.
- 1) TTMSales? I can't think of any way to make this a real
number.
- 2) TTMEPS? It looks like it could just be normal, but I'd like
to
- make sure.
- 3) Earnings growth numbers (Y1, Y5, and projections)? One
would
- expect percentage (e.g. "12" = 12%), is this the case?
- One final question: Since "EPS" is an array, does that mean I
can
- get historical EPS by using Ref(GetExtraData("EPS"),-#)? If
so, I've
- tried that and it didn't seem to work. Is there another way to
do it?
- I'm trying to set up some sort of CANSLIM type of exploration.
So,
- if anyone has any ideas on that, I would really appreciate the
help.
- Thank you.
- Please note that this group is for discussion between
users only.
- To get support from AmiBroker please send an e-mail directly
to
- SUPPORT {at} amibroker.com
- For other support material please check also:
- http://www.amibroker.com/support.html
- SPONSORED LINKS
- Investment
management software Real
estate investment software Investment
property software
- Software
support Real
estate investment analysis software Investment
software
- YAHOO! GROUPS LINKS
- Visit your group "amibroker " on
the web.
- To unsubscribe from this group, send an email to:
-
amibroker-unsubscribe@xxxxxxxxxxxxxxx
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
Please note that this group is for discussion
between users only.
To get support from AmiBroker please send
an e-mail directly to SUPPORT {at} amibroker.com
For other
support material please check also: http://www.amibroker.com/support.html
SPONSORED
LINKS Investment
management software Real
estate investment software Investment
property software Software
support Real
estate investment analysis software Investment
software
YAHOO! GROUPS LINKS
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For other support material please check also:
http://www.amibroker.com/support.html
SPONSORED LINKS
YAHOO! GROUPS LINKS
|