|
PureBytes Links
Trading Reference Links
|
Have tried different symbols and can get Both yellow and green
arrows on ER2 one minute, also on EOD get both on some dow stocks.
Not sure if this can be used on the futures one minute. The yellow
arrows on YM do not make sense and on ER2 both the yellow and green
do not indicate anything.
But this is worth a study, very interesting. Will see if I can make
changes for the futures.
Ray
--- In amibroker@xxxxxxxxxxxxxxx, Graham <kavemanperth@xxxx> wrote:
> condition3 is a value not a condition
>
> On 7/7/05, me_rayme <rayme@xxxx> wrote:
> > I have tested the code on YM RT one minute. Seems to work ok on
the
> > Yellow marker, But no Green up marks.
> >
> > Seems like a problem exists on Cond 1, 3, and 5. I have made
slight
> > changes.
> >
> > Ray
> >
> > LRSBval= -0.12;
> > LRSSval = 0.11;
> > Length3 = Length4 = FDBLen = FDSLen = MAvgLen = 20;
> > FDBuy = 6;
> > FDSell = 94;
> > PctAbvMA = .1;
> > PctBlwMA = .05;
> > PctAbvMAValue = MA(C,MAvgLen) * (100- PctAbvMA) / 100;
> > PctBlwMAValue = MA(C,MAvgLen) * (100+ PctBlwMA) / 100;
> >
> > FDBVal = StochD(FDBLen);
> > FDSVal = StochD(FDSLen);
> >
> > condition1 = C < PctAbvMAValue;
> > condition2 = C > PctBlwMAValue;
> > condition3 = LinRegSlope(C,length3)*LRSSval;
> > condition4 = LinRegSlope(C,20)>LRSSval;
> >
> > condition5 = (FDBVal <= FDBuy AND FDBVal > Ref(FDBVal,-1))
> > OR (Ref(FDBVal, -1) <= FDBuy AND FDBVal > Ref(FDBVal,-1));
> >
> > condition6= (FDSVal >= FDSell AND FDSVal < Ref(FDSVal,-1))
> > OR (Ref(FDSVal,-1) >= FDSell AND FDSVal < Ref(FDSVal,-1));
> >
> > PlotShapes((condition1 AND condition3 AND condition5)
> > *shapeUpArrow,colorBrightGreen,0,L);
> >
> > PlotShapes((condition2 AND condition4)
> > *shapeDownArrow,colorYellow,0,H);
> >
> > //Plot(C,"",colorGreen,64);
> > Plot( Close, "", colorBlack, styleCandle );
> > GraphXSpace =10;
> >
> >
> > --- In amibroker@xxxxxxxxxxxxxxx, "ricko8294_98" <ricko@xxxx>
wrote:
> > > I have made a stab at translating the code.
> > > I have to assume that the function LSR() is LinRegSlope()
> > > I have also added a line to plot the stock.
> > >
> > > Perhaps someone can check this code
> > >
> > > LRSBval= -0.12; LRSSval = 0.11;
> > > Length3 = Length4 = FDBLen = FDSLen = MAvgLen = 20;
> > > FDBuy = 6; FDSell = 94; PctAbvMA = .1; PctBlwMA = .05;
> > > PctAbvMAValue = MA(C,MAvgLen) * (100- PctAbvMA) / 100;
> > > PctBlwMAValue = MA(C,MAvgLen) * (100+ PctBlwMA) / 100;
> > > FDBVal = StochD(FDBLen);
> > >
> > > FDSVal = StochD(FDSLen);
> > > condition1 = C < PctAbvMAValue;
> > > condition2 = C > PctBlwMAValue;
> > > condition3 = LinRegSlope(C,length3)*LRSSval;
> > > condition4= LinRegSlope(C,20)>LRSSval;
> > > condition5= (FDBVal <= FDBuy AND FDBVal > Ref(FDBVal,-1)) OR
(Ref
> > > (FDBVal, -1) <= FDBuy AND FDBVal > Ref(FDBVal,-1));
> > > condition6= (FDSVal >= FDSell AND FDSVal < Ref(FDSVal,-1)) OR
(Ref
> > > (FDSVal,-1) >= FDSell AND FDSVal < Ref(FDSVal,-1));
> > > PlotShapes((condition1 AND condition3 AND condition5)
> > *shapeUpArrow,
> > > colorBrightGreen,0,L);
> > > PlotShapes((condition2 AND condition4)
> > > *shapeDownArrow,colorYellow,0,H);
> > > Plot(C,"",colorGreen,64);
> > >
> > > Hope it helps
> > > Rick
> > >
> > > --- In amibroker@xxxxxxxxxxxxxxx, "m.smith" <ink@xxxx> wrote:
> > > >
> > > > This is a "pivot formula" not in amibroker. Will someone
look at
> > > this and
> > > > see if it can be translated? I have been hasseling with this
> > > probably more
> > > > than it is worth. Thanks. Marshall
> > > >
> > > > {scalper pivot points } Input: LRSBval(-0.12), {level which
buys
> > > must be
> > > > below} LRSSval(0.11), {level which sells must be above}
Length3
> > (20),
> > > {Length
> > > > for Buy LRS} Length4(20),{Length for Sell LRS} FDBLen(20),
> > {Number
> > > of bars
> > > > to use for FastD calculation for Buy side} FDSLen(20),
{Number
> > of
> > > bars to
> > > > use for FastD calculation for Sell side} FDBuy(6), {Value of
> > FastD
> > > to Signal
> > > > long entry} FDSell(94), {Value of FastD to Signal Short
entry}
> > > MAvgLen(20),
> > > > PctAbvMA(.1), PctBlwMA(.05);
> > > > Vars: PctAbvMAValue(0.0), PctBlwMAValue(0.0), FDBVal(0.0),
FDSVal
> > > (0.0),
> > > > FastDValL(0.0), FastDValS(0.0);
> > > > PctAbvMAValue = (Average(Close,MAvgLen) * (100- PctAbvMA) /
100);
> > > > PctBlwMAValue = (Average(Close,MAvgLen) * (100+ PctBlwMA) /
> > 100);
> > > > FDBVal = FastD(FDBLen);
> > > > FDSVal = FastD(FDSLen); condition1 = C < PctAbvMAValue;
> > > > condition2 = C > PctBlwMAValue;
> > > > condition3=LinearregSlope(C,length3)LRSSval;
> > > > condition4= LRS(C,20)>LRSSval;
> > > > condition5= (FDBVal <= FDBuy AND FDBVal > FDBVal[1]) OR
(FDBVal
> > [1]
> > > <= FDBuy
> > > > AND FDBVal > FDBVal[1]);
> > > > condition6= (FDSVal >= FDSell AND FDSVal < FDSVal[1]) OR
(FDSVal
> > [1]
> > > >=
> > > > FDSell AND FDSVal < FDSVal[1]);
> > > > if condition1 AND condition3 AND condition5 then begin Plot1
(L -
> > > .5,"GoLong
> > > > ); end; if condition2 AND condition4 AND condition6 then
begin
> > Plot2
> > > (H + .5,
> > > > GoShort");
> > > > end;
> >
> >
> >
> >
> >
> > Please note that this group is for discussion between users only.
> >
> > To get support from AmiBroker please send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > For other support material please check also:
> > http://www.amibroker.com/support.html
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Cheers
> Graham
> http://e-wire.net.au/~eb_kavan/
------------------------ Yahoo! Groups Sponsor --------------------~-->
Try Online Currency Trading with GFT. Free 50K Demo. Trade
24 Hours. Commission-Free.
http://us.click.yahoo.com/DldnlA/9M2KAA/U1CZAA/GHeqlB/TM
--------------------------------------------------------------------~->
Please note that this group is for discussion between users only.
To get support from AmiBroker please send an e-mail directly to
SUPPORT {at} amibroker.com
For other support material please check also:
http://www.amibroker.com/support.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|