|
PureBytes Links
Trading Reference Links
|
Michael,
>>Unless you mean - You want to Break out of the Loop at the exact
point it is iterating through.<<
Actually that's exactly what I mean. Look at the code I've written.
After 'inColor' match is found, there is no need to continue with the
remaining iterations of the loop.
>>As a workaround - Im sure you could(have) employ IF statments.<<
Again correct. A work-around therefore, is not same as having
a 'break X' statement that will shift control from within nested
loops to any level backwards. (Which actaully is the point anyways.)
Regards,
- Salil V Gangal
--- In amibroker@xxxxxxxxxxxxxxx, "Michael.S.G." <OzFalcon@xxxx>
wrote:
> Salil,
> Unless you mean - You want to Break out of the Loop at the exact
point
> it is iterating through.
>
> I have never realy used Break in this fashon. IMHO it's an unclean
way to
> exit loops. But im sure there are plenty of others that would
disagree.
>
> If this is indeed what your after - Then you can only put a request
in to
> TJ via the normal channels. As a workaround - Im sure you could
(have)
> employ IF statments.
>
> KR
> Michael.
>
>
> At 01:55 PM 16/05/2004, you wrote:
> >Michael,
> >
> >Sure. I know others follow the posts and learn. (Count me into
> >those who learn.) Forcing a break out of running for loop is easy,
> >however, it's not same as having a 'break' statement.
> >
> >Imagine if the control is 2-3 levels deep into the for loops.
Having
> >break 1; break 2; break ... etc. to break out of each level is a
nice
> >thing to have. One of course can be creative and think of logic to
> >break out of all the levels, however given a choice of having
> >a 'break' statement and not having one, which one would you
choose ?
> >
> >Regards,
> >- Salil V Gangal
> >
> >
> >
> >--- In amibroker@xxxxxxxxxxxxxxx, "Michael.S.G." <OzFalcon@xxxx>
> >wrote:
> > > Salil,
> > > Possibly just "Filter Out" any post by Dingo may help.
> > > (aka Pal in Amibroker-ts
> > > a36b0c5.jpg
> > > )
> > >
> > > But seriously - Irrelevant of your qualms with dingo -
> > > His post was to the point & provided a solution to the
> > > question at hand. With no insinuation of previous issues.
> > > You may not realise it - But others follow posts and learn
> > > from solutions that arise from them.
> > > To suggest that some form of 'Censorship' be expressed by
> > > other users - At someones personal whimsy - On a Public
> > > forum - Is questionable at it's best.
> > >
> > > Remember - This is a Public forum - Where every member
> > > has every right to post to any other member of the forum.
> > > Even if said person request's otherwise.
> > >
> > > Perpetuating the issue - Is not in the best interests of anyone.
> > >
> > > <MSG>
> > >
> > >
> > > At 01:31 PM 16/05/2004, you wrote:
> > > >Michael,
> > > >
> > > >I guess it's much easier for Dingo to not reply to me.
> > > >
> > > >Regards,
> > > >- Salil V Gangal
> > > >
> > > >--- In amibroker@xxxxxxxxxxxxxxx, "Michael.S.G."
<OzFalcon@xxxx>
> > > >wrote:
> > > > > Salil,
> > > > > If you do not wish to have replies from Dingo on
this
> > > >mailing list
> > > > > - Then please remove yourself from list. Easy Eh?
> > > > >
> > > > > Why you persist in such petty issues is beyond me.
> > > > >
> > > > > <MSG>
> > > > >
> > > > > At 12:57 PM 16/05/2004, you wrote:
> > > > > >Your assertion about 'no need of break' is completely
> >pointless.
> > > >C,
> > > > > >C++, Java, Perl, ... all have mechanisms to 'break' out of
> >running
> > > > > >loops.
> > > > > >
> > > > > >BTW ... did you forget your pill again ? *smile* As I
wrote
> > > > > >earlier, I do not - *NOT* - need any replies from you to
me.
> >Get
> > > > > >it ? Can you follow my instructions and not reply to me ?
> > > > > >
> > > > > >
> > > > > >--- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@xxxx>
wrote:
> > > > > > > You don't need a break - if you follow my
instructions. Its
> > > >clear
> > > > > >that you
> > > > > > > didn't know how to do it.
> > > > > > >
> > > > > > > d
> > > > > > >
> > > > > > >
> > > > > > > _____
> > > > > > >
> > > > > > > From: Salil V Gangal [mailto:salil_gangal@x...]
> > > > > > > Sent: Saturday, May 15, 2004 10:47 PM
> > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > Subject: [amibroker] Re: Need to 'break'
> > > > > > >
> > > > > > >
> > > > > > > Hello,
> > > > > > >
> > > > > > > Well ... I thought I was quite clear about your replies
to
> >me.
> > > >No ?
> > > > > > >
> > > > > > > I know what exactly I need to do to manipulate a break,
> >however
> > > > > >it's
> > > > > > > not the same as a statement 'break'.
> > > > > > >
> > > > > > > - Salil V Gangal
> > > > > > >
> > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, "dingo" <dingo@xxxx>
> >wrote:
> > > > > > > > Then all you need to do is set colorindex to a value
that
> >will
> > > > > > > result in the
> > > > > > > > for loop ending:
> > > > > > > >
> > > > > > > > if ( color == inColor ) {
> > > > > > > > colorNumber = StrToNum(StrExtract
> >(colorToNumber,
> > > > > > > colorIndex+1));
> > > > > > > > colorIndex = 16;
> > > > > > > > }
> > > > > > > >
> > > > > > > > d
> > > > > > > > ________________________________
> > > > > > > >
> > > > > > > > From: Salil V Gangal [mailto:salil_gangal@x...]
> > > > > > > > Sent: Saturday, May 15, 2004 10:28 PM
> > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > Subject: [amibroker] Need to 'break'
> > > > > > > >
> > > > > > > >
> > > > > > > > Herman,
> > > > > > > >
> > > > > > > > The code below could use a statement to 'break'
out
> >of a
> > > > > > > running for
> > > > > > > >
> > > > > > > > loop. After the match for inColor is found,
> >there's no
> > > > > >need
> > > > > > > to
> > > > > > > > continue with the remaining iterations of for
loop.
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > - Salil V Gangal
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In amibroker@xxxxxxxxxxxxxxx, Salil V Gangal
> > > > > > > <salil_gangal@xxxx>
> > > > > > > >
> > > > > > > > wrote:
> > > > > > > > > Herman,
> > > > > > > > >
> > > > > > > > > Glad you found my code useful. I played some
> >more ...
> > > > > > > > >
> > > > > > > > > In the code below one needs to simply indicate
> >what
> > > > > >ticker
> > > > > > > he/she
> > > > > > > > wants to plot and in what color in a ticker,
color
> >pair
> > > > > >such
> > > > > > > >
> > > > >
>as "MSFT,red,JNJ,green,C,yellow,WMT,pink,IP,violet,CAT,blue",
> > > > > > > and
> > > > > > > > update the AmiBroker's color codes in the
function
> > > > > > > getColorNumber.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > // Chart display similar to FT
> > > > > > > > >
> > > > > > > > > Title = "";
> > > > > > > > >
> > > > > > > > > barvisible = Status("barvisible");
> > > > > > > > >
> > > > > > > > > firstBarVisible = barvisible AND NOT Ref(
> > > >barvisible, -
> > > > > >1 );
> > > > > > > > >
> > > > > > > > > procedure plotScaled ( ticker, color)
> > > > > > > > >
> > > > > > > > > {
> > > > > > > > >
> > > > > > > > > array = Foreign(ticker,"C");
> > > > > > > > >
> > > > > > > > > scaledArray = 100*(array / ValueWhen
> > > > > > > (firstBarVisible,array ) -
> > > > > > > > 1);
> > > > > > > > >
> > > > > > > > > Plot(scaledArray ,"", color ,
> > > >styleLine|styleThick);
> > > > > > > > >
> > > > > > > > > Title = Title + EncodeColor(color) +
ticker
> >+ " ";
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > function getColorNumber( inColor )
> > > > > > > > >
> > > > > > > > > {
> > > > > > > > >
> > > > > > > > > colorToNumber
> > > > > > > > =
> > > > > > >
> > > > > >
> > > >
> >
> "red,29,green,27,yellow,42,pink,40,violet,38,blue,32,white,55,black,
> > > > > > > > 16";
> > > > > > > > >
> > > > > > > > > colorNumber = 47;
> > > > > > > > >
> > > > > > > > > for( colorIndex = 0;
> > > > > > > > >
> > > > > > > > > (color = StrExtract(colorToNumber,
> > > >colorIndex)) !
> > > > > > > = "";
> > > > > > > > >
> > > > > > > > > colorIndex = colorIndex + 2
> > > > > > > > >
> > > > > > > > > ) {
> > > > > > > > >
> > > > > > > > > if ( color == inColor ) {
> > > > > > > > >
> > > > > > > > > colorNumber = StrToNum(StrExtract
> > > > > > > (colorToNumber,
> > > > > > > > colorIndex+1));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > return colorNumber;
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > tickerColorList
> > > > > > > >
> > > >= "MSFT,red,JNJ,green,C,yellow,WMT,pink,IP,violet,CAT,blue";
> > > > > > > > >
> > > > > > > > > for( tickerIndex=0; (ticker=StrExtract
> > > >(tickerColorList,
> > > > > > > > tickerIndex))!= ""; tickerIndex = tickerIndex +
2) {
> > > > > > > > >
> > > > > > > > > plotScaled ( ticker,
> > > > > > > > getColorNumber(StrExtract(tickerColorList,
> > > > > > > > tickerIndex+1)));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > > Regards,
> > > > > > > > > - Salil V Gangal
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Herman van den Bergen <psytek@xxxx> wrote:
> > > > > > > > > Thanks for your code Salil, nice to play
with :-)
> > > >here is
> > > > > >a
> > > > > > > slight
> > > > > > > >
> > > > > > > > modification of your code to plot normalized
charts
> >for
> > > >a
> > > > > > > small
> > > > > > > > watchlist:
> > > > > > > > >
> > > > > > > > > // Chart display similar to FT
> > > > > > > > > barvisible = Status("barvisible");
> > > > > > > > > firstBarVisible = barvisible AND NOT Ref(
> > > >barvisible, -
> > > > > >1 );
> > > > > > > > > global ChartColor;
> > > > > > > > >
> > > > > > > > > function PlotNormalizedTicker( Ticker)
> > > > > > > > > {
> > > > > > > > > array2=Foreign(ticker,"C");
> > > > > > > > > scaledArray2=100*(array2/ValueWhen
> > > > > > > (firstBarVisible,array2)-1);
> > > > > > > > > Plot
(scaledArray2,"\n"+Ticker,ChartColor++,4);
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > list = GetCategorySymbols( categoryWatchlist,
6);
> > > > > > > > > ChartColor=1;
> > > > > > > > > for( n=0; (Ticker=StrExtract( List, n))!= "";
n++)
> > > > > > > > PlotNormalizedTicker( Ticker);
> > > > > > > > >
> > > > > > > > > herman
> > > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Salil V Gangal
[mailto:salil_gangal@x...]
> > > > > > > > > Sent: Saturday, May 15, 2004 7:41 PM
> > > > > > > > > To: amibroker@xxxxxxxxxxxxxxx
> > > > > > > > > Subject: Re: [amibroker] Performance Charts
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Sam,
> > > > > > > > >
> > > > > > > > > Perhaps following will help. This code is for
> > > >AmiBroker's
> > > > > > > IB.
> > > > > > > > Copy-
> > > > > > > > n-paste the code block of 2nd ticker multiple
times
> >per
> > > > > >your
> > > > > > > needs
> > > > > > > > to
> > > > > > > > put additional tickers. Also, use tickers you
need
> >in
> > > > > >place
> > > > > > > > of "MSFT", "YHOO".
> > > > > > > > >
> > > > > > > > > // Chart display similar to FT
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > barvisible = Status("barvisible");
> > > > > > > > >
> > > > > > > > > firstBarVisible = barvisible AND NOT Ref(
> > > >barvisible, -
> > > > > >1 );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > // code block for 1st ticker
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ticker = "MSFT";
> > > > > > > > >
> > > > > > > > > array1=Foreign(ticker,"C");
> > > > > > > > >
> > > > > > > > > scaledArray1=100*(array1/ValueWhen
> > > > > >(firstBarVisible,array1)-
> > > > > > > 1);
> > > > > > > > >
> > > > > > > > > Plot(scaledArray1,"",colorBlue,4);
> > > > > > > > >
> > > > > > > > > Title = EncodeColor(colorBlue) + ticker + " ";
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > // code block for 2nd ticker
> > > > > > > > >
> > > > > > > > > ticker = "YHOO";
> > > > > > > > >
> > > > > > > > > array2=Foreign(ticker,"C");
> > > > > > > > >
> > > > > > > > > scaledArray2=100*(array2/ValueWhen
> > > > > >(firstBarVisible,array2)-
> > > > > > > 1);
> > > > > > > > >
> > > > > > > > > Plot(scaledArray2,"",colorRed,4);
> > > > > > > > >
> > > > > > > > > Title = Title + EncodeColor(colorRed) + ticker
> >+ " ";
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Regards,
> > > > > > > > > - Salil V Gangal
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- Sam Levy <slevy1220@xxxx> wrote:
> > > > > > > > > > Has anyone used Amibroker to
> >construct "performance
> > > > > > > charts"
> > > > > > > > similar
> > > > > > > > > > to those available at the following link?
> > > > > > > > > >
> > > > > > > > > > http://stockcharts.com/charts/performance/
> > > > > > > > > >
> > > > > > > > > > If so, would appreciate a suggestion on how
to
> > > > > >construct
> > > > > > > afl
> > > > > > > > code.
> > > > > > > > > > Thanks
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ---------------------------------
> > > > > > > > > Do you Yahoo!?
> > > > > > > > > SBC Yahoo! - Internet access at a great low
price.
> > > > > > > > >
> > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > -----------------------------------------
> > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > (Web page:
> > > > > >http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > --------------------------------------------
> > > > > > > > > Check group FAQ at:
> > > > > > > >
> > > >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > > -----------------------------------------
> > > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > > (Web page:
> > > > > >http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > > --------------------------------------------
> > > > > > > > > Check group FAQ at:
> > > > > > > >
> > > >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Yahoo! Groups SponsorADVERTISEMENT
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ---------------------------------
> > > > > > > > > Yahoo! Groups Links
> > > > > > > > >
> > > > > > > > > To visit your group on the web, go to:
> > > > > > > > > http://groups.yahoo.com/group/amibroker/
> > > > > > > > >
> > > > > > > > > To unsubscribe from this group, send an
email
> >to:
> > > > > > > > > amibroker-unsubscribe@xxxxxxxxxxxxxxx
> > > > > > > > >
> > > > > > > > > Your use of Yahoo! Groups is subject to the
> >Yahoo!
> > > > > >Terms
> > > > > > > of
> > > > > > > > Service.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ---------------------------------
> > > > > > > > > Do you Yahoo!?
> > > > > > > > > SBC Yahoo! - Internet access at a great low
price.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > > -----------------------------------------
> > > > > > > > Post AmiQuote-related messages ONLY to:
> > > > > > > amiquote@xxxxxxxxxxxxxxx
> > > > > > > > (Web page:
> > > >http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > > --------------------------------------------
> > > > > > > > Check group FAQ at:
> > > > > > > >
> >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Yahoo! Groups Sponsor
> > > > > > > > ADVERTISEMENT
> > > > > > > > click here
> > > > > > > >
> > > > > > >
> > > > >
> > > >
> >
><http://rd.yahoo.com/SIG=129aooqtt/M=285832.4851039.5997748.1269404/D
> >=
> > > groups
> > > > > > >
> > > > > >
> > > >
> >
> /S=1705632198:HM/EXP=1084760885/A=2105440/R=0/SIG=14dpdlr1u/*http://
> > > > > > > www.hous
> > > > > > > > eholdfinance.com/ln/TrackingServlet?
> > > > > > > cmd_MediaCode=&fc=APS&mkt=000&mc=01PSYAY
> > > > > > > > A004001B220000U0300L0010000000000&dest=HOME_PAGE>
> > > > > > > >
> > > > > > > > <http://us.adserver.yahoo.com/l?>
> > > > > > M=285832.4851039.5997748.1269404/D=groups/S=
> > > > > > > > :HM/A=2105440/rand=900332338>
> > > > > > > >
> > > > > > > > ________________________________
> > > > > > > >
> > > > > > > > Yahoo! Groups Links
> > > > > > > >
> > > > > > > >
> > > > > > > > * To visit your group on the web, go to:
> > > > > > > > http://groups.yahoo.com/group/amibroker/
> > > > > > > >
> > > > > > > > * To unsubscribe from this group, send an
> >email to:
> > > > > > > > amibroker-unsubscribe@xxxxxxxxxxxxxxx
> > > > > > > > <mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?>
> > >subject=Unsubscribe>
> > > > > > > >
> > > > > > > > * Your use of Yahoo! Groups is subject to
the
> > > >Yahoo!
> > > > > > > Terms of
> > > > > > > > Service <http://docs.yahoo.com/info/terms/> .
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Send BUG REPORTS to bugs@xxxx
> > > > > > > Send SUGGESTIONS to suggest@xxxx
> > > > > > > -----------------------------------------
> > > > > > > Post AmiQuote-related messages ONLY to:
> >amiquote@xxxxxxxxxxxxxxx
> > > > > > > (Web page:
http://groups.yahoo.com/group/amiquote/messages/)
> > > > > > > --------------------------------------------
> > > > > > > Check group FAQ at:
> > > > > > >
http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Yahoo! Groups Sponsor
> > > > > > >
> > > > > > > ADVERTISEMENT
> > > > > > >
> > > > > > >
> > > > >
> > > >
> >
><http://rd.yahoo.com/SIG=129338khj/M=285832.4851039.5997748.1269404/D
> >=>
> > > >
> >
>groups> /S=1705632198:HM/EXP=1084762050/A=2142721/R=0/SIG=14di1pg12/*
> > > >http://
> > > > > >www.hous
> > > > > > > eholdfinance.com/ln/TrackingServlet?
> > > > > >cmd_MediaCode=&fc=APS&mkt=000&mc=01PSYAY
> > > > > > > A004001B220000U0300L0020000000000&dest=HOME_PAGE> click
here
> > > > > > >
> > > > > > >
> > > > <http://us.adserver.yahoo.com/l?>
> > >M=285832.4851039.5997748.1269404/D=grou
> > > > ps/S=>
> > > > > >:HM/A=2142721/rand=421750390>
> > > > > > >
> > > > > > >
> > > > > > > _____
> > > > > > >
> > > > > > > Yahoo! Groups Links
> > > > > > >
> > > > > > >
> > > > > > > * To visit your group on the web, go to:
> > > > > > > http://groups.yahoo.com/group/amibroker/
> > > > > > >
> > > > > > >
> > > > > > > * To unsubscribe from this group, send an email to:
> > > > > > > amibroker-unsubscribe@xxxxxxxxxxxxxxx
> > > > > > >
> > <mailto:amibroker-unsubscribe@xxxxxxxxxxxxxxx?>
>subject=Unsubscribe>
> > > > > > >
> > > > > > >
> > > > > > > * Your use of Yahoo! Groups is subject to the Yahoo!
> >Terms
> > > >of
> > > > > >Service
> > > > > > > <http://docs.yahoo.com/info/terms/> .
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >Send BUG REPORTS to bugs@xxxx
> > > > > >Send SUGGESTIONS to suggest@xxxx
> > > > > >-----------------------------------------
> > > > > >Post AmiQuote-related messages ONLY to:
> >amiquote@xxxxxxxxxxxxxxx
> > > > > >(Web page:
http://groups.yahoo.com/group/amiquote/messages/)
> > > > > >--------------------------------------------
> > > > > >Check group FAQ at:
> > > > > >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > > > >Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > >
> > > >Send BUG REPORTS to bugs@xxxx
> > > >Send SUGGESTIONS to suggest@xxxx
> > > >-----------------------------------------
> > > >Post AmiQuote-related messages ONLY to:
amiquote@xxxxxxxxxxxxxxx
> > > >(Web page: http://groups.yahoo.com/group/amiquote/messages/)
> > > >--------------------------------------------
> > > >Check group FAQ at:
> > > >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> > > >Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >Send BUG REPORTS to bugs@xxxx
> >Send SUGGESTIONS to suggest@xxxx
> >-----------------------------------------
> >Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
> >(Web page: http://groups.yahoo.com/group/amiquote/messages/)
> >--------------------------------------------
> >Check group FAQ at:
> >http://groups.yahoo.com/group/amibroker/files/groupfaq.html
> >Yahoo! Groups Links
> >
> >
> >
> >
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/GHeqlB/TM
---------------------------------------------------------------------~->
Send BUG REPORTS to bugs@xxxxxxxxxxxxx
Send SUGGESTIONS to suggest@xxxxxxxxxxxxx
-----------------------------------------
Post AmiQuote-related messages ONLY to: amiquote@xxxxxxxxxxxxxxx
(Web page: http://groups.yahoo.com/group/amiquote/messages/)
--------------------------------------------
Check group FAQ at: http://groups.yahoo.com/group/amibroker/files/groupfaq.html
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/amibroker/
<*> To unsubscribe from this group, send an email to:
amibroker-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|